HRS TM11R-5M2-88

NEW
Subminiature, LAN Modular Jack Connectors
TM11R-5M2 Series
■Features
24
1.Fast Ethernet Support
16
2. Subminiature Design Contributes to Saving
Space in the Equipment
13.4
Conforms to the TIA/EIA-568-A data wiring standard and
meets requirements of CAT5 transmission performance
for 1,2-3,6 conductor pairs. As such, these products fully
support Fast Ethernet (100BASE-TX) transmission.
Other series
TM21R--5C--88--LP
17.5
Having built-in optical indicators, with height of only
11.5mm, width of 15mm and depth of 17.5mm the
connectors can be used in extremely limited spaces.
14.5
11.5
15
3. Built-in Optical Indicators
Optical indicators are integral part of the connectors help
saving space on customer’s board.
Compared with LED type indicators, they do not emit any
electrical noise.
21
TM11R--5M2--88--LP
Space saving
4. EMI protection
Metal shield covers the outer surfaces of the connectors
assuring complete protection against electromagnetic
interference.
Built-in multiple shield and ground contacts assure
reliable connection with the mounting panel as well as
with the mating connectors.
housing
LED optical indicators are taking place
5. Environmental considerations
Plating is lead-free in order to protect environment.
6. FCC Standards
EMI protection
Meets requirements of FCC Title 47, Part 68, Subpart F.
■Applications
Telecom Hubs, Routers, Bridges and ATM Transmission
Equipment, Ethernet Switches and Networking Equipment,
Test and Measurement Equipment, Medical Diagnostic
Equipment.
Built-in LED type
Built-in Optical pipe type
(Possibility of electromagnetic
noise emission and interference.)
(No electromagnetic
noise emission.)
2002.8
1
■Product Specifications
Current rating
1A
Voltage rating
125 V AC
Operating temperature range : -25ç to +80ç (Note)
Rating
Item
Specification
Conditions
1. Insulation resistance
100 M ohms min.
100 V DC
2. Dielectric Withstanding Voltage
(between adjacent contacts)
No flashover or insulation breakdown
500 V AC applied for one minute
3. Withstanding voltage
(between contact and shield)
No flashover or insulation breakdown
1500 V AC / one minute
4. Contact resistance
230 m ohms max.
100mA
5. Vibration
No electrical discontinuity of 5 µ sec. or more.
Contact resistance: 250m ohms max.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours / 3 axis
6. Shock
No electrical discontinuity of 5 µ sec. or more.
Contact resistance: 250m ohms max.
Acceleration of 490 m/s2, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis
7. Durability
(mating/un-mating)
Contact resistance: 250m ohms max.
200 cycles
Temperature: -55ç/+15ç to +35ç/+85ç/+15ç to +35ç
Duration: 30/2 to 3/30/2 to 3(Minutes)
5 cycles
Contact resistance: 250 m ohms max.
8. Temperature cycle
Insulation resistance: 100 M ohms min.
9. Humidity
Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
Insulation resistance: 10 M ohms min. (Dry state)
500 hours at temperature of 40ç and humidity of 90% to 95%
10. Salt Spray
Contact resistance: 250 m ohms max.
Exposed to density 5% salt water for 48 hours
Note :Includes temperature rise caused by current flow.
■Materials
Part
Material
Finish
Remarks
Insulator
PBT
Color: Black
UL94V-0
Contact
Copper alloy
Contact area: Gold plating
Termination area: Tin alloy plating
-------
Polycarbonate
Color: Transparent
UL94V-0
Copper alloy
Tin plating
-------
Optical pipe
Shield
■Ordering information
●Jacks
TM11 R - 5M2 - 8 8 - LP
1
2
3
4 5
6
1 Series name
TM11 Series
2 Connector type
R: Jack
3 Jack type
5M2: PCB Right-angle through hole type
4 Jack opening code 8: 8 contacts
5 Number of inserted contacts
6 Optical pipe
8: 8 contact
LP: With optical pipe inserted
Blank: Without optical pipe
2
■Modular Jack Connectors Supporting CAT5e (for 1,2-3,6 pair)
●Single Port With Built-in Optical Pipe
14.5
( 4.25 )
0.8
15
Contact No. 1
0.45
0.25
3.6
0.6
3
1.7
11.5
11.5
Contact No. 8
0.3
(2)
11.4
1
14.75
5.55
3.1
11.25
(4.25)
3.1
TM11R--5M2 1 PC
Contact No. 8
2.54
CL No.
222-2905-0
(4.25)
Part Number
TM11R-5M2-88-LP
17.5
0.8
0.8
Contact No. 1
11.1
Contact No. 7
Contact No. 2
●Single Port Without Optical Pipe
14.5
(4.25)
0.8
15
Contact No. 1
3.6
0.6
3
11.5
11.5
Contact No. 8
(2)
0.25
0.45
0.3
1
11.4
5.55
14.75
(4.25)
3.1
CL No.
222-2906-2
2.54
Part Number
TM11R-5M2-88
0.8
(4.25)
0.8
3.1
Contact No. 8
Contact No. 1
Contact No. 7
Contact No. 2
3
BRecommended PCB mounting patterns
●With Built-in Optical Pipe
●Without Optical Pipe
11.1
8.89
6.35
8.89
3.81
6.35
LED location area
3.81
Printed board edge
14.75
Connector front edge
3
1
2
2MIN
4
2
2-Ø2.4
11.4 MIN
18.1MIN
4
5
6
2- Ø1.6
2
No conductive &
ground traces
11.4
8
5MIN
5 MIN
2-Ø1.6
2- Ø2.4
11.4 MAX
Contact No.
8- Ø1
7
2 MIN
8 6 4 2
11.4 MAX
3.1MAX
7 5 3 1
2.54
8-Ø1
1
No conductive traces
1.27
3.1
2.54
Contact No.
1
No conductive traces
3.1
11.25
LED light emission area
3.1MAX
1.27
No conductive &
ground traces
11.4
Printed board
edge
Connector
front edge
14.75
11.4 MIN
18.1 MIN
Suggested LEDs
3.2MAX
LED light emitting center
2.7 MAX
1.5 MAX
*Recommendations for PCB Design
1 Areas indicated should be free of conductive traces.
2 Area indicated should be free of conductive & ground traces.
3 Recommended board thickness: 1.6mm.
To assure that the indicator light pipes operates correctly the LED’s must be installed directly on the PCB, within
4
recommended dimensions and with light emitting center in upward direction.
Contact applicable manufacturer for LED specification.
BPanel Cutout
●For Both Types, With and Without Built-in Optical Pipe
(33)
Lock lever
1MIN 1
1
4.5MIN
12
PCB mounting surface
0.3
3±1 1
TM21P--88P
15.4
Panel side
1
Connector front surface
1
0
2 -0.7
3.1MAX
5.55
*Recommendations for Panel Design
1 The shield contacts should connect with the panel cut-out on all sides.
4
BCAT5 Transmission Characteristics Data
For fully mated receptacle (TM11R-5M2-88-LP) and plug (TM21P-88P).
●Signal Attenuation
0.5
Attenuation(dB)
0.4
0.3
0.2
0.1
0
0
20
40
60
80
100
80
100
80
100
Frequency(MHz)
1,2
3,6
CAT5 Spec
NEXT(dB)
●Near-End Crosstalk (NEXT)
90
80
70
60
50
40
30
20
10
0
0
20
40
60
Frequency(MHz)
1,2-3,6
CAT5 Spec
Return Loss(dB)
●Return Loss
80
70
60
50
40
30
20
10
0
0
20
1,2
5
40
60
Frequency(MHz)
3,6
CAT5 Spec