MCC 2.0 Amp Glass Passivated Junction Fast Recovery Rectifiers 50 to 1000 Volts Features • • • • RGP20A THRU RGP20M omponents 21201 Itasca Street Chatsworth !"# $ % !"# High temperature metallurgically bonded construction Glass passivated cavity-free junction 2.0 amperes operation at TA=55OC and with no thermal runaway. Typical IR less than 0.2uA Maximum Ratings • • • DO-201AE O O Operating Temperature: -55 C to +150 C Storage Temperature: -55OC to +150 OC Typical Thermal Resistance: 22OC/W Junction to Ambient MCC Part Number RGP20A RGP20B RGP20D RGP20G RGP20J RGP20K RGP20M Maximum Recurrent Peak Reverse Volt age 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V D A Cathode Mark B D Electrical Characteristics @ 25 C Unless Otherwise Specified O Maximum Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time RGP20A-20G RGP20J RGP20K-20M Typical Junction Capacitance TA = 55OC IF(AV) 2.0 A IFSM 80A 8.3ms, half sine VF 1.3V IFM = 2.0A; TA=25OC C O IR 5.0uA 200uA TA=25 C TA=125 OC Trr 150nS 250nS 500nS 35pF IF=0.5A, IR=1.0A, Irr=0.25A CJ DIMENSIONS DIM A B C D INCHES MIN ----.038 1.000 MAX .370 .250 .042 --- Measured at f=1.0MH Z VR=4.0V www.mccsemi.com MM MIN ----0.96 25.40 MAX 9.50 6.40 1.06 --- NOTE MCC RGP20A thru RGP20M Figure 1 Typical Forward Characteristics 20 Figure 2 Forward Derating Curve 10 3.0 6 4 2.5 2 Amps 25OC 2.0 1 .6 1.5 Amps .4 1.0 .2 .5 .1 .06 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 .04 50 75 100 125 150 0 O C Average Forward Rectified Current - Amperes versus Ambient Temperature - OC .02 .01 175 .4 .6 .8 1.0 1.2 1.4 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ =25OC 10 6 4 2 1 .1 .2 .4 1 2 4 10 Volts 20 40 100 200 Junction Capacitance - pF versus Reverse Voltage - Volts www.mccsemi.com 400 1000 MCC RGP20A thru RGP20M Figure 4 Peak Forward Surge Current 120 100 80 60 Amps 40 20 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 Pulse Generator Note 2 25Vdc 1Ω Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm www.mccsemi.com