RM10TN-2H A S D G H E R B Q R "Y" F P + ~ ~ ~ TYP K Z - φ"X" N J L T C W M U V Description: Mitsubishi Three-Phase Diode Bridge Modules are designed for use in applications requiring rectification of three-phase AC lines into DC voltage. Each module consists of six diodes and the interconnect required to form a complete threephase bridge circuit. Each diode is electrically insulated from the mounting base plate for easy mounting on a common heatsink with other components. Features: u Isolated Mounting u Metal Base Plate ~ ~ ~ + - u Low Thermal Impedance Applications: Outline Drawing and Circuit Diagram u Motor Control Dimensions Inches Millimeters Dimensions Inches Millimeters A 2.83 71.8 N 0.16 4.0 B 1.18 30.0 P 0.02 0.6 C 0.35 9.0 Q 0.55 14.0 D 2.55 64.8 R 0.20 5.0 E 0.59 15.0 S 0.35 9.0 F 0.54 13.7 T 0.14 3.5 G 2.32 58.8 U 0.45 11.5 H 2.21 56.2 V 0.71 18.0 J 0.48 12.08 W 0.06 1.5 K 0.40 10.16 X 0.16 4.0 L 1.60 40.64 Y 0.16 4.0 M 0.05 1.20 Z 0.08 2.0 u Inverters u UPS Ordering Information: RM10TN-2H Sep.1998 RM10TN-2H Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol RM10TN-2H Units Repetitive Peak Reverse Voltage VRRM 1600 Volts Non-Repetitive Peak Reverse Voltage VRSM 1700 Volts EA 440 Volts Recommended AC Input Voltage DC Output Current (Tb = 100°C) IO 10 Amperes IFSM 200 Amperes I2t for Fusing (Value for One Cycle of Surge Current) I2t 166 A2sec Junction Temperature Tj -40 ~ +125 °C Storage Temperature Tstg -40 ~ +125 °C Operating Frequency f 1000 Hz Maximum Mounting Torque M3.5 Mounting Screw – 0.78 ~ 0.98 N·m Maximum Mounting Torque M3.5 Terminal Screw – 0.78 ~ 0.98 N·m Viso 2500 Vrms Surge (Non-Repetitive) Forward Current (One Half Cycle at 60Hz, Peak Value) Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) Electrical and Thermal Characteristics, Tj = 25 °C unless otherwise specified Characteristics Min. Typ. Max. Repetitive Reverse Current Symbol IRRM Tj = 125°C, VRRM = Rated Test Conditions – – 8.0 Units mA Forward Voltage Drop VFM Tj = 25°C, IFM = 10A, – – 1.5 Volts – - 3.5 °C/ W °C/W Instantaneous Meaurement Thermal Resistance Rth(j-b) Junction to Base Plate Thermal Resistance Rth(b-f) Base to Fin, Thermal Grease Applied – – 0.3 At 500V DC 10 – – Isolation Resistance MΩ Between Terminal and Base Plate ALLOWABLE DC OUTPUT CURRENT VS. BASE PLATE TEMPERATURE BASE PLATE TEMPERATURE, Tb, (°C) 120 100 80 60 40 20 0 0 2 4 6 8 10 DC OUTPUT CURRENT, Io, (AMPERES) Sep.1998