Stellaris LM4F211 controlCARD ® The Stellaris LM4F211 controlCARD is a DIMM form-factor evaluation board that can be used standalone or with a range of baseboards to accelerate evaluation and development. Texas Instruments offers a range of controlCARD baseboards for motor and power-control applications. In most cases, these are available as complete kits that include a controlCARD and a baseboard. The Stellaris MDL-LM4F211CNCD is part of a controlCARD lineup that includes cards for C2000™, Hercules™ and MSP430™ devices. Check the Baseboard Compatibility Matrix to see which configurations are supported. The Stellaris LM4F211H5QR microcontroller is an ARM® Cortex™-M4F device with 256 KB Flash and operation at up to 80 MHz. MDL-LM4F211CNCD kit contents Features • MDL-LM4F211CNCD controlCARD module • On-board Stellaris In-Circuit Debug Interface • Cables/Accessories • LM4F211H5QR Stellaris microcontroller • 32-bit ARM Cortex-M4 floatingpoint core • 80-MHz maximum speed • 256 KB Flash, 32 KB RAM • DIMM form factor • GPIO signals available on DIMM edge connector • User LED • Debug • Stellaris In-Circuit Debug Interface (ICDI) • Isolated to 300-V working-voltage using TI’s digital isolators • USB-mini-B to USB-A plug cable (for debug and serial communication) • ½-inch jumper wires (for bridging power) • Development Kit CD containing: • For the controlCARD module in standalone use: – Complete documentation – StellarisWare® Peripheral Driver Library and example source code • For the controlCARD module when used with a supported baseboard: – Source code and binaries – Documentation specific to each supported baseboard – GUI Windows application • Tools CD(s) • Code Composer Studio™ Integrated Development Environment (IDE) • Other tool chains NOTE: The MDL-LM4F211CNCD board might be populated with an LM4F231H5QR microcontroller. This device contains a superset of the features of the LM4F211H5QR microcontroller. There is no difference in functionality. For more information, please visit: www.ti.com/tool/mdl-lm4f211cncd Baseboard Compatibility Matrix The MDL-LM4F211CNCD board plugs into the Stellaris DK-LM4F-DRV8312 3-Phase Brushless DC Motor Control Kit © 2012 Texas Instruments Incorporated Electrical compatibility? Solution software projects? Portable module and driver software? Complete kit available? Baseboard Description DRV8312 50V, 3.5A threephase inverter Yes Yes Yes DK-LM4FDRV8312 DRV8301 60V, 60A threephase inverter Yes No Yes No TMDSHVMTRPFCKIT 350V, 10A three-phase inverter Yes No Yes No SPMT280 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2012, Texas Instruments Incorporated