Order this document by MCT1413B/D PERIPHERAL DRIVER ARRAY The seven NPN Darlington connected transistors in this array are well suited for driving lamps, relays, or printer hammers in a variety of industrial and consumer applications. Their high breakdown voltage and internal suppression diodes insure freedom from problems associated with inductive loads. Peak inrush currents to 600 mA permit them to drive incandescent lamps. The MCT1413, B with a 2.7 kΩ series input resistor is well suited for systems utilizing a 5.0 V TTL or CMOS Logic. SEMICONDUCTOR TECHNICAL DATA 16 1 P SUFFIX PLASTIC PACKAGE CASE 648D This MCT–prefixed device is intended to be a possible replacement for the similar device with the MC–prefix. Because the MCT device originates from different source material, there may be subtle differences in typical parameter values or characteristic curves. Due to the diversity of potential applications, Motorola can not assure identical performance in all circuits. Motorola recommends that the customer qualify the MCT–prefixed device in each potential application. MAXIMUM RATINGS (TA = 25°C and rating apply to any one device in the package unless otherwise noted.) Rating Symbol Value Unit Output Voltage VO 50 V Input Voltage VI 30 V Collector Current – Continuous IC 500 mA Base Current – Continuous IB 25 mA Operating Ambient Temperature Range MCT1413 MCT1413B TA °C 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 – 20 to + 85 – 40 to + 85 Tstg – 55 to +150 °C Junction Temperature TJ 150 °C Thermal Resistance – Junction–to–Ambient θJA 67 °C/W Storage Temperature Range PIN CONNECTIONS CAUTION: These devices do not have internal ESD protection circuitry and are rated as CLASS 1 devices per the ESD test method in Mil–Std–833D. They should be handled using standard ESD prevention methods to avoid damage to the device. ORDERING INFORMATION Device Operating Temperature Range MCT1413P (ULN2003A) TA = – 20° to +85°C MCT1413BP TA = – 40° to +85°C Package Plastic Motorola, Inc. 1994 MOTOROLA ANALOG IC DEVICE DATA 1 MCT1413, B ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise noted.) Symbol Characteristic Output Leakage Current (VO = 50 V) (VO = 50 V, TA = + 85°C) (VO = 50 V, TA = – 40°C) MCT1413, B MCT1413, B MCT1413B Collector–Emitter Saturation Voltage (IC = 350 mA, IB = 500 µA) (IC = 200 mA, IB = 350 µA) (IC = 100 mA, IB = 250 µA) (IC = 350 mA, IB = 500 µA, TA = + 85°C, – 40°C) (IC = 200 mA, IB = 350 µA, TA = + 85°C, – 40°C) (IC = 100 mA, IB = 250 µA, TA = + 85°C, – 40°C) MCT1413, B MCT1413, B MCT1413, B MCT1413B MCT1413B MCT1413B Input Current – ON Condition (Vin = 3.85 V) MCT1413, B Output Voltage – ON Condition (Vin = 2.4 V, IC = 200 mA) (Vin = 2.7 V, IC = 250 mA) (Vin = 3.0 V, IC = 300 mA) (Vin = 2.7 V, IC = 250 mA, TA = + 85°C, – 40°C) (Vin = 3.0 V, IC = 300 mA, TA = + 85°C, – 40°C) MCT1413, B MCT1413, B MCT1413, B MCT1413B MCT1413B Output Current – OFF Condition (Iin = 50 µA, Vout = 5.0 V) (Iin = 50 µA, Vout = 5.0 V, TA = + 85°C) (Iin = 50 µA, Vout = 5.0 V, TA = – 40°C) MCT1413, B MCT1413, B MCT1413B Clamp Diode Leakage Current (VR = 50 V) (VR = 50 V, TA = + 85°C) (VR = 50 V, TA = – 40°C) MCT1413, B MCT1413, B MCT1413B Clamp Diode Forward Voltage (IF = 350 mA) (IF = 350 mA, TA = + 85°C, – 40°C) MCT1413, B MCT1413B Min Typ Max – – – – – – 50 100 100 – – – – – – 1.1 0.95 0.85 – – – 1.6 1.3 1.1 1.75 1.5 1.3 – 0.93 1.35 – – – – – – – – – – 2.0 2.0 2.0 2.0 2.0 – – – – – – 100 500 500 – – – – – – 50 100 100 – – 1.5 – 2.0 2.0 Unit µA ICEX VCE(sat) V Iin mA Vout V µA Iout µA IR VF V Figure 1. Representative Schematic Diagram (1/7 MCT1413, B) Pin 9 2.7 k 7.2 k 3.0 k NOTE: Dotted lines indicate parasitic diodes. This device contains 14 active transistors. 2 MOTOROLA ANALOG IC DEVICE DATA MCT1413, B OUTLINE DIMENSIONS P SUFFIX PLASTIC PACKAGE CASE 648D–02 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.25 (0.010). 6. ROUNDED CORNERS OPTIONAL. –A – 16 9 1 8 –B – F L C S –T – SEATING PLANE K H J G D 16 PL 0.25 (0.010) M MOTOROLA ANALOG IC DEVICE DATA T B S A S M DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.760 0.245 0.260 0.145 0.175 0.015 0.021 0.050 0.070 0.100 BSC 0.050 BSC 0.008 0.015 0.120 0.140 0.295 0.305 0° 10° 0.015 0.035 MILLIMETERS MIN MAX 18.80 19.30 6.23 6.60 3.69 4.44 0.39 0.53 1.27 1.77 2.54 BSC 1.27 BSC 0.21 0.38 3.05 3.55 7.50 7.74 0° 10° 0.39 0.88 3 MCT1413, B Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315 MFAX: [email protected] – TOUCHTONE (602) 244–6609 INTERNET: http://Design–NET.com HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 4 ◊ *MCT1413B/D* MCT1413B/D MOTOROLA ANALOG IC DEVICE DATA