VISHAY VOM617A

VOM617A
www.vishay.com
Vishay Semiconductors
Low Input Current, Phototransistor Output, SOP-4,
Mini-Flat Package
FEATURES
A
1
4
C
C
2
3
E
• Operating temperature from - 55 °C to + 110 °C
• SOP-4 mini-flat package
• Isolation test voltage, 3750 VRMS
• Low saturation voltage
• Fast switching times
i179089
• Low coupling capacitance
• End-stackable, 0.100" (2.54 mm) spacing
DESCRIPTION
• CTR range 40 % to 600 %, IF = 5 mA
The 110 °C rated VOM617A has a GaAs infrared emitting
diode emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a 4 pin
100 mil lead pitch miniflat package. It features a high current
transfer ratio, low coupling capacitance, and high isolation
voltage.
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• PLCs
• Telecommunication
These coupling devices are designed for signal transmission
between two electrically separated circuits.
• Lighting control system
• Solar inverters
AGENCY APPROVALS
• AC drives
(All parts are certified under base model VOM617A)
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• FIMKO EN 60065 and EN 60950-1
• CQC GB8898-2011, GB4943.1-2001
ORDERING INFORMATION
V
O
M
6
1
7
A
-
PART NUMBER
SOP-4,
mini-flat
VDE, UL, cUL,
FIMKO, CQC
SOP-4,
mini-flat
X
0
CTR
BIN
AGENCY
CERTIFIED/
PACKAGE
UL, cUL,
FIMKO, CQC
#
0
VDE OPTION
1
T
SOP-4
TAPE
AND
REEL
≥5
CTR (%)
5 mA
50 to 600
63 to 125
100 to 200
160 to 320
250 to 500
80 to 160
130 to 260
200 to 400
VOM617AT VOM617A-2T VOM617A-3T VOM617A-4T VOM617A-6T VOM617A-7T VOM617A-8T VOM617A-9T
50 to 600
63 to 125
100 to 200
160 to 320
250 to 500
80 to 160
130 to 260
200 to 400
VOM617AX001T
VOM617A2X001T
VOM617A3X001T
VOM617A4X001T
VOM617A6X001T
VOM617A7X001T
VOM617A8X001T
VOM617A9X001T
Document Number: 83446
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
VOM617A
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
DC forward current
IF
60
mA
Reverse voltage
VR
6
V
Pdiss
70
mW
IFSM
2.5
A
Collector emitter voltage
VCEO
80
V
Emitter collector voltage
VECO
INPUT
Power dissipation
tp ≤ 10 μs
Surge forward current
OUTPUT
Collector current
IC
tp ≤ 1 ms
Power dissipation
7
V
50
mA
100
mA
Pdiss
150
mW
VISO
3750
VRMS
COUPLER
Isolation test voltage
between emitter and detector
t = 1 min
Total power dissipation
Ptot
170
mW
Operating temperature range
Tamb
- 55 to + 110
°C
Storage temperature range
Tstg
- 55 to + 150
°C
Tj
125
°C
Tsld
260
°C
Junction temperature
Soldering temperature (1)
Ptot - Total Power Dissipation (mW)
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) See “Assembly Instructions” for surface mounted devices (www.vishay.com/doc?80054).
200
Coupled device
150
100
Phototransistor
IR-diode
50
0
0
25
50
75
100
125
Tamb - Ambient Temperature (°C)
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
Document Number: 83446
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
VOM617A
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
INPUT
Forward voltage
TEST CONDITION
SYMBOL
IF = 5 mA
Reverse current
VR = 6 V
VR = 0 V, f = 1 MHz
Capacitance
OUTPUT
Collector emitter leakage current
Collector emitter breakdown voltage
Emitter collector breakdown voltage
Collector emitter capacitance
MIN.
TYP.
MAX.
VF
1.1
1.6
V
IR
0.01
10
μA
Cj
9
VCE = 20 V
ICEO
IC = 100 μA
BVCEO
80
0.3
IE = 10 μA
BVECO
7
VCE = 5 V, f = 1 MHz
CCE
UNIT
pF
100
nA
V
V
2.8
pF
COUPLER
Coupling capacitance
Collector emitter saturation voltage
Cut-off frequency
f = 1 MHz
CIO
0.3
IF = 10 mA, IC = 2.5 mA
VCEsat
0.12
IF = 10 mA, VCC = 5 V, RL = 100 Ω
fctr
110
pF
0.4
V
kHz
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
IC/IF
TEST CONDITION
IF = 5 mA, VCE = 5 V
PART
SYMBOL
MIN.
MAX.
UNIT
VOM617A
CTR
50
TYP.
600
%
VOM617A-2
CTR
63
125
%
VOM617A-3
CTR
100
200
%
VOM617A-4
CTR
160
320
%
VOM617A-6
CTR
250
500
%
VOM617A-7
CTR
80
160
%
VOM617A-8
CTR
130
260
%
VOM617A-9
CTR
200
400
%
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
NON-SATURATED
Rise and fall time
tr
3
μs
Fall time
tf
3
μs
ton
6
μs
toff
4
μs
Turn-on time
IC = 2 mA, VCC = 5 V,
RL = 100 Ω
Turn-off time
SATURATED
Rise and fall time
Fall time
Turn-on time
Turn-off time
IF = 1.6 mA, VCC = 5 V,
RL = 1.9 kΩ
tr
7
μs
tf
12
μs
ton
9
μs
toff
15
μs
Document Number: 83446
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
VOM617A
www.vishay.com
Vishay Semiconductors
VCC = 5 V
Input
Input pulse
RL
10 %
VOUT
Output pulse
90 %
tr
t off
t on
Fig. 2 - Test Circuit
tf
Fig. 3 - Test Circuit and Waveforms
SAFETY AND INSULATION RATINGS
PARAMETER
SYMBOL
VALUE
UNIT
Output safety power
PSO
300
mW
Input safety current
Isi
200
mW
Safety temperature
TS
150
°C
Comparative tracking index
CTI
175
MAXIMUM SAFETY RATINGS
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage
VISO
3750
VRMS
Maximum transient isolation voltage
VIOTM
6000
Vpeak
Maximum repetitive peak isolation voltage
VIORM
565
Vpeak
RIO
1012
Ω
RIO
1011
Ω
Insulation resistance
Isolation resistance
Tamb = 25 °C, VDC = 500 V
Tamb = 100 °C, VDC = 500 V
Climatic classification (according to IEC 68 part 1)
Environment (pollution degree in accordance to DIN VDE 0109)
55/110/21
2
Internal creepage
≥5
mm
External creepage
≥5
mm
Clearance
≥5
mm
≥ 0.4
mm
Insulation thickness
Note
• As per DIN EN 60747-5-5 (VDE 0884), § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Document Number: 83446
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
VOM617A
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
14
Tamb = 110 °C
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = - 55 °C
10
IC - Collector Current (mA)
IF - Forward Current (mA)
100
1
0.6
0.8
1.0
1.2
1.4
8
IF = 5 mA
6
4
IF = 1 mA
IF = 2 mA
2
1.6
0
0.1
0.2
0.3
0.4
VCE - Collector Emitter Voltage (sat) (V)
Fig. 4 - Forward Voltage vs. Forward Current
Fig. 7 - Collector Current vs. Collector Emitter Voltage (sat)
IF = 35 mA
50
45
IF = 30 mA
40
35
IF = 25 mA
30
IF = 20 mA
25
20
IF = 15 mA
15
10
IF = 10 mA
IF = 1 mA
5
IF = 5 mA
0
0
1
2
3
4
5
6
7
8
9
10
NCTR - Normalized CTR (non-saturated)
VF - Forward Voltage (V)
55
IC - Collector Current (mA)
10
0
0.1
1.2
IF = 5 mA
1.0
0.8
0.6
0.4
0.2
0
Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS)
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
- 60 - 40 - 20 0
VCE - Collector Emitter Voltage (non-sat) (V)
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 8 - Normalized Current Transfer Ratio (non-sat) vs.
Ambient Temperature
1.2
IF = 0 mA
1000
VCE = 40 V
100
10
VCE = 24 V
1
0.1
VCE = 12 V
0.01
NCTR - Normalized CTR (sat)
10 000
ICE0 - Leakage Current (nA)
IF = 10 mA
12
IF = 5 mA
1.0
0.8
0.6
0.4
0.2
0
0.001
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
- 60 - 40 - 20 0
- 60 - 40 - 20 0
20
40
60
20
40
60
80 100 120
80 100 120
Tamb - Ambient Temperature (°C)
Tamb - Ambient Temperature (°C)
Fig. 6 - Leakage Current vs. Ambient Temperature
Fig. 9 - Normalized Current Transfer Ratio (sat) vs.
Ambient Temperature
Document Number: 83446
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
VOM617A
Vishay Semiconductors
0
0.40
IF = 10 mA
0.35
0.30
Ic = 5 mA
Ic = 2 mA
0.15
0.10
Ic = 1 mA
0.05
RL = 100 Ω
- 40
0.25
0.20
VCE = 5 V
- 20
Phase Angle (deg)
VCEsat - Collector Emitter Voltage (V)
www.vishay.com
RL = 1000 Ω
- 60
- 80
- 100
- 120
- 140
- 160
0.00
- 60 - 40 - 20 0
20
40
60
1
80 100 120
10
100
1000
Tamb - Ambient Temperature (°C)
f - Cut-off Frequency (kHz)
Fig. 10 - Collector Emitter Voltage vs. Ambient Temperature
(saturated)
Fig. 13 - FCTR vs. Phase Angle
1000
Tamb = 0 °C
1.2
VCC = 5 V
Tamb = - 55 °C
Tamb = 25 °C
1.0
FCTR (kHz)
NCTR - Normalized CTR (NS)
1.4
0.8
0.6
Tamb = 75 °C
0.4
Tamb = 100 °C
10
Normalized to:
IF = 5 A, VCE = 5 V,
Tamb = 25 °C
0.2
0
1
0.1
1
10
0.1
100
1
10
100
IF - Forward Current (mA)
IC (mA)
Fig. 11 - Normalized CTR (NS) vs. Forward Current
Fig. 14 - FCTR vs. Collector Current
1.2
1.0
0.8
VCE = 0.4 V
Normalized to:
IF = 5 mA,
VCE = 5 V,
Tamb = 25 °C
1000
Tamb = 0 °C
VCE = 5 V, IF = 2 mA
Tamb = - 55 °C
0.6
0.4
Tamb = 25 °C
0.2
Tamb = 75 °C
Tamb = 100 °C
0
ton, toff Switching Time (μs)
NCTR - Normalized CTR (sat)
100
100
toff (μs)
10
1
ton (μs)
0.1
0.1
1
10
100
0
5
10
15
20
IF - Forward Current (mA)
RL - Load Resistance (kΩ)
Fig. 12 - Normalized CTR (sat) vs. Forward Current
Fig. 15 - Switching Time vs. Load Resistance
Document Number: 83446
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
VOM617A
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
2.54 ± 0.25
4
3
2
6.5
0.10 ± 0.1 2.00 ± 0.2
3.85 ± 0.3
5.30 ± 0.3
0.40 ± 0.1
7.00
0.2 ± 0.05
1
2.54
Pin one ID
0.8
4.40 ± 0.2
1
+ 0.2
- 0.7
i178048
PACKAGE MARKING (example of VOM617A-3X001T)
617A3
V YWW
25X
Notes
• Only option 1 is reflected in the package marking with the characters “X”.
• Tape and reel suffix (T) is not part of the package marking.
TAPE AND REEL DIMENSIONS in millimeters
17.1
1.5 ± 0.1
2 ± 0.1
4 ± 0.1
1.75 ± 0.1
5.5 ± 0.1
12 ± 0.3
100
330
(13")
8 ± 0.1
0.3 ± 0.05
2.45 ± 0.1
Fig. 16 - Reel Dimensions (3000 units per reel)
Fig. 17 - Tape Dimensions
Document Number: 83446
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 1.3, 11-Dec-12
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000