TEMD5510FX01 www.vishay.com Vishay Semiconductors Ambient Light Sensor FEATURES • Package type: surface mount • Package form: top view • Dimensions (L x W x H in mm): 5 x 4.24 x 1.12 • Radiant sensitive area (in mm2): 7.5 • • • • • 20535 AEC-Q101 qualified High photo sensitivity Adapted to human eye responsivity Supression filter for near infrared radiation Angle of half sensitivity: ϕ = ± 65° • Floor life: 72 h, MSL 4, acc. J-STD-020 • Lead (Pb)-free reflow soldering • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DESCRIPTION Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 TEMD5510FX01 ambient light sensor is a PIN photodiode with high photo sensitivity in a miniature surface mount device (SMD). The detector chip has 7.5 mm2 sensitive area. It is sensitive to visible light much like the human eye and has peak sensitivity at 540 nm. APPLICATIONS • • • • • Automotive sensors Ambient light sensors Backlight dimmers Notebooks Computers PRODUCT SUMMARY COMPONENT TEMD5510FX01 Ira (μA) ϕ (deg) λ0.5 (nm) 26 ± 65 430 to 610 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM TEMD5510FX01 Tape and reel MOQ: 1500 pcs, 1500 pcs/reel Top view Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb ≤ 25 °C SYMBOL VALUE VR 16 UNIT V PV 215 mW Tj 100 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 110 °C Acc. reflow solder profile fig. 5 Tsd 260 °C Soldered on PCB with pad dimensions: 4 mm x 4 mm RthJA 350 K/W Junction temperature Soldering temperature Thermal resistance junction/ambient Rev. 1.5, 28-Oct-11 Document Number: 81293 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD5510FX01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. Breakdown voltage IR = 100 μA, E = 0 V(BR) 16 TYP. MAX. UNIT VR = 10 V, E = 0 Iro 2 30 nA VR = 0 V, f = 1 MHz, E = 0 CD 1600 pF Reverse dark current Diode capacitance V VR = 3 V, f = 1 MHz, E = 0 CD 730 pF Ee = 1 mW/cm2, λ = 550 nm, VR = 5 V Ira 26 μA Ev = 100 lx, CIE illuminant A, VR = 5 V Ira Ev = 100 lx, CIE illuminant A, VR = 5 V TKIra 0.2 %/K Angle of half sensitivity ϕ ± 65 deg Wavelength of peak sensitivity λp 540 nm λ 0.5 430 to 610 nm Reverse light current Temperature coefficient of Ira Range of spectral bandwidth 0.8 1 1.4 μA BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.0 Relative Spectral Sensitivity 100 10 VR = 10 V 0.8 human eye 0.6 0.4 0.2 1 20 40 60 Tamb - Ambient Temperature (°C) 94 8403 0.0 400 100 80 Fig. 1 - Reverse Dark Current vs. Ambient Temperature Photodiode 600 0° 10 CIE Illuminant A VR = 5 V 1 Srel - Relative Sensitivity 100 1000 Fig. 3 - Relative Spectral Sensitivity vs. Wavelength 1000 Ira - Photocurrent (µA) 800 Wavelength (nm) 20047 10 ° 20 ° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement Iro - Reverse Dark Current (nA) 1000 80° 0.1 10 20080 100 1000 10000 Ev - Illuminance (lx) Fig. 2 - Reverse Light Current vs. Irradiance Rev. 1.5, 28-Oct-11 0.6 0.4 0.2 0 94 8406_1 Fig. 4 - Relative Radiant Sensitivity vs. Angular Displacement Document Number: 81293 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD5510FX01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Drawing-No.: 6.541-5060.01-4 Issue: 3; 05.02.08 Not indicated tolerances ± 0.1 20536 Rev. 1.5, 28-Oct-11 Document Number: 81293 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD5510FX01 www.vishay.com Vishay Semiconductors TAPING DIMENSIONS in millimeters 20537 REEL DIMENSIONS in millimeters 20874 Rev. 1.5, 28-Oct-11 Document Number: 81293 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TEMD5510FX01 www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK 300 255 °C 240 °C 217 °C 250 Temperature (°C) max. 260 °C 245 °C FLOOR LIFE 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp up 3 °C/s max. ramp down 6 °C/s 50 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 5 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D Rev. 1.5, 28-Oct-11 Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: Moisture sensitivity: level 4 Floor life: 72 h Conditions: Tamb < 30 °C, RH < 60 % DRYING In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or recommended conditions: 192 h at 40 °C (+ 5 °C), RH < 5 % or 96 h at 60 °C (+ 5 °C), RH < 5 %. Document Number: 81293 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000