Ordering number:EN5051 FX208 N-Channel Silicon MOSFET Very High-Speed Switching Applications Features Package Dimensions · Low ON-resistance. · Very high-speed switching. · 2.5V drive. unit:mm 2121 [FX208] Swithing Time Test CIrcuit 1:No Contact 2:Gate 3:Source 4:No Contact 5:Drain 6:Drain SANYO:XP5 (Bottom view) Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 20 V Gate-to-Source Voltage VGSS ±10 V 4 A Drain Current (DC) ID Drain Current (Pulse) IDP PW≤10µs, duty cycle≤1% Allowable Power Dissipation PD PD Tc=25˚C 2 W Channel Temperature Tch 150 ˚C Storage Temperature Tstg –55 to +150 ˚C 16 A 8 W Mounted on ceramic board (750mm2×0.8mm) Electrical Characteristics at Ta = 25˚C Parameter D-S Breakdown Voltage Symbol Conditions Ratings min typ max V(BR)DSS IDSS ID=–1mA, VGS=0 IGSS VGS(off) | Yfs | VGS=±8V, VDS=0 RDS(on) RDS(on) ID=2A, VGS=4V ID=1A, VGS=2.5V 65 85 mΩ 85 125 mΩ Input Capacitance Ciss VDS=10V, f=1MHz 400 pF Output Capacitance Coss VDS=10V, f=1MHz 300 pF Reverse Transfer Capacitance Crss 160 pF Turn-ON Delay Time td(on) tr VDS=10V, f=1MHz See specified Test Circuit 20 ns See specified Test Circuit 70 ns See specified Test Circuit 100 ns Fall Time td(off) tf See specified Test Circuit 120 Diode Forward Voltage VSD IS=4A, VGS=0 1.0 Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source ON-State Resistance Rise Time Turn-OFF Delay Time 20 Unit V VDS=16V, VGS=0 VDS=10V, ID=1mA VDS=10V, ID=2A 0.5 3.5 100 µA ±10 µA 1.5 5 V S ns 1.2 V · Marking:208 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/42895MO (KOTO) TA-0133 No.5051-1/3 FX208 No.5051-2/3 FX208 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.5051-3/3