Ordering number:EN5048 FP402 N-Channel MOS Silicon FET Very High-Speed Switching Applicaitons Features Package Dimensions · Low ON resistance. · Very high-speed switching. · Complex type with 2 low-voltage-drive N-channel MOSFETs facilitating high-density mounting. unit:mm 2102A [FP402] Electrical Connection 1:Gate 2:Drain 3:Source 4:Drain 5:Gate 6:Drain 7:Drain 1:Gate 2:Drain 3:Source 4:Drain 5:Gate 6:Drain 7:Drain (Top view) SANYO:PCP5 (Bottom view) Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Symbol Conditions Ratings VDSS VGSS Drain Current (DC) Unit 20 V ±15 V 1 A ID Drain Current (Pulse) IDP PW≤10µs, duty cycle ≤1% Allowable Power Dissipation PD PD Total Power Dissipation Channel Temperature PT Tch Storage Temperature Tstg 4 A Tc=25˚C, 1 unit 2.0 W Mounted on ceramic board (250mm2×0.8mm) 1 unit 0.8 W Mounted on ceramic board (250mm2×0.8mm) 1.1 W 150 ˚C –55 to +150 ˚C Electrical Characteristics at Ta=25˚C Parameter D-S Breakdown Voltage Zero Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source ON-State Resistance Symbol V(BR)DSS IDSS Conditons ID=1mA, VGS=0 Ratings min typ max 20 V VDS=20V, VGS=0 IGSS VGS(off) | Yfs | VGS=±12V, VDS=0 RDS(on) RDS(on) ID=500mA, VGS=10V ID=500mA, VGS=4V Unit VDS=10V, ID=1mA 0.8 VDS=10V, ID=500mA 0.6 100 µA ±10 µA 2.0 V 1.0 S 350 480 mΩ 550 750 mΩ Input Capacitance Ciss VDS=10V, f=1MHz 50 pF Output Capacitance Coss 45 pF Reverse Transfer Capacitance Crss VDS=10V, f=1MHz VDS=10V, f=1MHz 15 pF Turn-ON Delay Time td(on) See specified Test Circuit 8 ns tr See specified Test Circuit 10 ns td(off) See specified Test Circuit 30 ns tf See specified Test Circuit 20 ns IS=1A, VGS=0 1.0 V Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage VSD Marking:402 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/41095TS (KOTO) TA-0099 No.5048-1/3 FP402 Switching Time Test Circuit No.5048-2/3 FP402 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.5048-3/3