SANYO STK4042

Ordering number: EN1677B
Thick Film Hybrid IC
STK4042XI
AF Power Amplifier (Split Power Supply)
(80W min, THD = 0.008%)
Features
Package Dimensions
• Small-sized package permitting audio sets to be made
slimmer.
• The STK4018XI series are available for output 50W to
80W and are pin-compatible.
• Facilitates thermal design of slim stereo sets.
• The use of a current mirror circuit, cascode circuit, pure
complementary circuit provides low distortion (0.008%
/ 100kHz, LPF ON).
• Possible to design electronic supplementary circuits
(pop noise muting at the time of power ON/OFF, load
short protector, thermal shutdown)
unit: mm
4075
[STK4042XI]
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
VCC max
±67
V
θj-c
1.2
°C/W
Junction temperature
Tj
150
°C
Operating substrate temperature
Tc
125
°C
−30 to +125
°C
1
s
Maximum supply voltage
Thermal resistance
Storage temperature
Tstg
Available time for load short-circuit
ts*1
VCC = ±46.5V, RL = 8Ω, f = 50Hz, PO = 80W
Recommended Operating Conditions at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Recommended supply voltage
VCC
±46.5
V
Load resistance
RL
8
Ω
SANYO Electric Co., Ltd. Semiconductor Business Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
61297HA (ID) / 8298MO / 4015MY, TS No. 1677—1/5
STK4042XI
Operating Characteristics at Ta = 25°C, VCC = ±46.5V, RL = 8Ω (noninductive load), VG = 40 dB,
Rg = 600Ω, 100kHz-LPFon:
Parameter
Quiescent current
Output power
Symbol
ICCO
PO
Conditions
VCC = ±56V
15
THD = 0.008%,
f = 20 to 20kHz
80
Total harmonic distortion
THD
PO = 1W, f = 1kHz
Frequency response
fL, fH
Po = 1W,
Input impedance
Output noise voltage
Neutral voltage
Notes.
ri
VNO*2
VN
min
typ
Unit
120
mA
W
0.008
+0
dB
−3
PO = 1W, f = 1kHz
-70
%
20 to 50k
Hz
55
kΩ
VCC = ±56V, Rg = 10kΩ
VCC = ±56V
max
0
1.2
mVrms
+70
mV
For power supply at the time of test, use a constant-voltage power supply
unless otherwimse specified.
*1 For measurement of the available time for load short-circuit and output
noise voltage, use the specified transformer power supply shown below.
*2 The output noise voltage is represented by the peak value on the rms
scale (VTVM) of average value indicating type. The noise voltage waveform includes no flicker noise.
Specified transformer power supply
(Equivalent to MG-200)
Equivalent Circuit
No. 1677—2/5
STK4042XI
Output power, PO - W
Total harmonic distortion, THD - %
Sample Application Circuit : 80W min AF Power Amplifier
Output power, PO - W
Output power, PO - W
Voltage gain, VG - dB
Input voltage, Vi - mV
Frequency, f - Hz
Frequency, f - Hz
No. 1677—3/5
IC power dissipation, Pd - W
Operating substrate temprature, Tc - °C
Supply voltage, VCC - V
Quiescent
Neutral voltage,
current,VIcco
- mA
N - mV
Quiescent current, ICCO - mA
Quiescent
Neutral voltage,
current,VIcco
- mA
N - mV
Quiescent current, ICCO - mA
Voltage gain, VG - dB
Output power, PO - W
STK4042XI
Frequency, f - Hz
Supply voltage, VCC - V
Output power, PO - W
No. 1677—4/5
STK4042XI
■
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear
power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury,
death or property loss.
■
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
➀
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their
officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated
with such use:
➁
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO.,
LTD., its affiliates, subsidiaries and distributors or any of their officers and employees, jointly or severally.
■
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO
believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of June, 1997. Specifications and information herein are subject to change without notice.
No. 1677—5/5