FSA641 – 2:1 MIPI Switch, Featuring 2-Data and 1-Data Lane Configuration Description Features Switch Type Signal Types VCC Input Signals RON ∆RON ICC OIRR XTALK Bandwidth Channel-to-Channel Skew CON Package Ordering Information 2:1 MIPI, DPHY 2.65 to 4.3 V 0 to VCC 7 Ω Typical HS MIPI 10 Ω Typical LS MIPI 0.75 Ω Typical HS & LS MIPI 1 A Maximum -50 dB Typical -40 dB Typical 1 GHz Typical 15 ps Typical 8 pF Typical 20-Lead UMLP 3.0x3.0x 0.55 mm, 0.4 mm Pitch FSA641UMX The FSA641 is a 2:1 MIPI switch made for 2-data lane and 1-data lane modules. This part is configured as a singlepole, double-throw switch (SPDT) and is optimized for switching between two high-speed or low-power MIPI sources. The FSA641 has specially been designed for the MIPI specification and allows connection to either a CSI or DSI module. The FSA641 features an extremely low on capacitance (CON) of 8 pF. The wide bandwidth (1 GHz) results in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk minimizes interference. Related Resources For samples and questions, please contact: [email protected]. FSA641 Demonstration Board Applications Cellular Phones, Smartphones Displays Typical Application FSA641 CLK MIPI Module #1 (Higher Bandwidth) Data [1:2] Ex. 5 Megapixel camera CLK MIPI Switch MIPI Module #2 (Low Bandwidth) Data [1:2] Processor CLK Data [1] Ex. VGA camera Figure 1. Mobile Phone Example © 2010 Fairchild Semiconductor Corporation FSA641 • Rev. 1.0.3 www.fairchildsemi.com FSA641 – 2:1 MIPI Switch, featuring 2-Data and 1-Data Lane Configuration September 2012 FSA641 – 2:1 MIPI Switch, featuring 2-Data and 1-Data Lane Configuration Physical Dimensions 0.10 C 3.00 2X A 3.00 B PIN1 IDENT 1.80 3.00 3.00 1.80 0.10 C 2X 0.80 20X TOP VIEW 0.40 0.20 20X 0.08 C 0.55 MAX 0.10 C RECOMMENDED LAND PATTERN (0.15) 0.05 0.00 C SIDE VIEW SEATING PLANE NOTES: 1.75 1.65 6 A. PACKAGE CONFORMS TO JEDEC MO-248 VARIATION UEEE. 10 5 B. DIMENSIONS ARE IN MILLIMETERS. 11 C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 0.25 20X 0.15 D. LAND PATTERN RECOMMENDATION IS FROM PCB MATRIX CALCULATOR V2009. 1.75 1.65 E. DRAWING FILENAME: MKT-UMLP20Brev1. 15 1 PIN 1 IDENT 20 16 0.45 20X 0.35 0.40 0.10 0.05 C A B C BOTTOM VIEW Figure 16. 20-Lead, Quad, Ultrathin Molded Leadless Package (UMLP), 3.0 x 3.0 mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/packaging/3.0x3.0_UMLP_Pack_TNR_Spec.pdf . Ordering Information Part Number Top Mark Operating Temperature Range FSA641UMX F641 -40 to +85°C Package 20-Lead, Quad, Ultrathin Molded Leadless Package (UMLP), 3.0 x 3.0 mm © 2010 Fairchild Semiconductor Corporation FSA641 • Rev. 1.0.3 www.fairchildsemi.com 8 FSA641 – 2:1 MIPI Switch, featuring 2-Data and 1-Data Lane Configuration © 2010 Fairchild Semiconductor Corporation FSA641 • Rev. 1.0.3 www.fairchildsemi.com 9