BYT 12P-1000 ® FAST RECOVERY RECTIFIER DIODE VERY HIGH REVERSE VOLTAGE CAPABILITY VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING Cathode connected to case A K SUITABLE APPLICATIONS FREE WHEELING DIODE IN CONVERTERS AND MOTOR CONTROL CIRCUITS RECTIFIER IN S.M.P.S. TO220AC (Plastic) ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit VRRM Repetitive Peak Reverse Voltage 1000 V VRSM Non Repetitive Peak Reverse Voltage 1000 V IFRM Repetitive Peak Forward Current 150 A 25 A IF (RMS) tp ≤ 10µs RMS Forward Current IF (AV) Average Forward Current Tcase = 100°C δ = 0.5 12 A IFSM Surge Non Repetitive Forward Current tp = 10ms Sinusoidal 75 A Power Dissipation Tcase = 100°C 25 W - 40 to + 150 - 40 to + 150 °C Value Unit 2 °C/W P Tstg Tj Storage and Junction Temperature Range THERMAL RESISTANCE Symbol Rth (j - c) Test Conditions Junction-case October 1999 - Ed: 1B 1/5 BYT 12P-1000 ELECTRICAL CHARACTERISTICS STATIC CHARACTERISTICS Synbol IR Test Conditions Min. Typ. VR = VRRM Tj = 25°C Tj = 100°C VF IF = 12A Tj = 25°C Max. Unit 50 µA 2.5 mA 1.9 V 1.8 Tj = 100°C RECOVERY CHARACTERISTICS Symbol trr Test Conditions Tj = 25°C Min. Typ. Max. Unit ns IF = 1A diF/dt = - 15A/µs VR = 30V 155 IF = 0.5A IR = 1A Irr = 0.25A 65 TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance) Symbol tIRM Test Conditions diF/dt = - 50A/µs diF/dt = - 100A/µs IRM Min. VCC = 200 V IF = 12A Lp ≤ 0.05µH Tj = 100°C See figure 11 Typ. Max. Unit 200 ns 7.8 A Max. Unit 120 diF/dt = -50A/µs 9 diF/dt = - 100A/µs TURN-OFF OVERVOLTAGE COEFFICIENT (With Series Inductance) Symbol C= VRP VCC Test Conditions Tj = 100°C diF/dt = - 12A/µs VCC = 200V Lp = 12µH Min. IF = IF (AV) See figure 12 Typ. 4.5 To evaluate the conduction losses use the following equations: VF = 1.47 + 0.026 IF P = 1.47 x IF(AV) + 0.026 IF2(RMS) Figure 1. Low frequency power losses versus average current 2/5 Figure 2. Peak current versus form factor BYT 12P-1000 Figure 3. Non repetitive peak surge current versus overload duration Figure 4. Thermal impedance versus pulse width Figure 5. Voltage drop versus forward current Figure 6. Recovery charge versus diF/dt Figure 7. Recovery time versus diF/dt- Figure 8. Peak reverse current versus diF/dt- 3/5 BYT 12P-1000 Figure 9. Peak forward voltage versus diF/dtt Figure 10. Dynamic parameters versus junction temperature. Figure 11. Turn-off switching characteristics (without series inductance). Figure 12. Turn-off switching characteristics (with series inductance) 4/5 BYT 12P-1000 PACKAGE MECHANICAL DATA : TO220AC Plastic REF. A H2 C L5 L7 ØI L6 L2 D L9 F1 L4 M F E G A C D E F F1 G H2 L2 L4 L5 L6 L7 L9 M Diam. I DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.40 4.60 0.173 0.181 1.23 1.32 0.048 0.051 2.40 2.72 0.094 0.107 0.49 0.70 0.019 0.027 0.61 0.88 0.024 0.034 1.14 1.70 0.044 0.066 4.95 5.15 0.194 0.202 10.00 10.40 0.393 0.409 16.40 typ. 0.645 typ. 13.00 14.00 0.511 0.551 2.65 2.95 0.104 0.116 15.25 15.75 0.600 0.620 6.20 6.60 0.244 0.259 3.50 3.93 0.137 0.154 2.6 typ. 0.102 typ. 3.75 3.85 0.147 0.151 Marking: type number Cooling method: by conduction (method C) Weight : 1.86g Recommended torque value : 80cm. N Maximum torque value : 100cm. N Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 1999 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5