VS-21DQ06, VS-21DQ06-M3 www.vishay.com Vishay Semiconductors Schottky Rectifier, 2 A FEATURES • Low profile, axial leaded outline • High frequency operation Cathode Anode • Very low forward voltage drop • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance DO-204AL • Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC PRODUCT SUMMARY Package DO-204AL (DO-41) IF(AV) 2A • Designed and qualified for commercial level • Halogen-free according to IEC 61249-2-21 definition (-M3 only) VR 60 V VF at IF 0.55 V IRM max. 10 mA at 125 °C TJ max. 150 °C Diode variation Single die EAS 4.0 mJ DESCRIPTION The VS-21DQ06... axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS CHARACTERISTICS SYMBOL IF(AV) VALUES UNITS 2 A Rectangular waveform 60 VRRM V VF 2 Apk, TJ = 125 °C TJ Range 0.55 - 40 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL VR Maximum DC reverse voltage VS-21DQ06 VS-21DQ06-M3 UNITS 60 60 V VRWM Maximum working peak reverse voltage ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current See fig. 4 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 6 IFSM Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 8 mH 4.0 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 0.5 A Revision: 21-Sep-11 50 % duty cycle at TC = 106 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied 2 340 A 60 Document Number: 93280 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-21DQ06, VS-21DQ06-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 2A Maximum forward voltage drop VFM (1) TJ = 25 °C 4A 2A TJ = 125 °C 4A IRM (1) Maximum reverse leakage current TJ = 25 °C VR = Rated VR TJ = 125 °C VALUES MAX. TYP. 0.53 0.60 0.67 0.75 0.49 0.55 0.61 0.67 0.02 0.50 7.0 10 UNITS V mA Typical junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 120 pF Typical series inductance LS Measured lead to lead 5 mm from package body 8.0 nH Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TEST CONDITIONS TStg VALUES UNITS - 40 to 150 °C Maximum thermal resistance, junction to ambient RthJA DC operation Without cooling fin 100 Typical thermal resistance, junction to lead RthJL DC operation See fig. 4 25 0.33 Approximate weight Marking device °C/W g 0.012 Case style DO-204AL (D-41) oz. 21DQ06 Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Revision: 21-Sep-11 Document Number: 93280 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-21DQ06, VS-21DQ06-M3 www.vishay.com Vishay Semiconductors 150 Allowable Lead Temperature (°C) IF - Instantaneous Forward Current (A) 10 TJ = 150°C TJ = 125°C TJ = 25°C 1 DC 120 90 30 = 1/8 inch see note (1) 0.1 0 0 0.3 0.6 0.9 0 1.2 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 93280_01 3 2 TJ = 150° C 10 Average Power Loss (W) IR - Reverse Current (mA) 2 Fig. 4 - Maximum Allowable Lead Temperature vs. Average Forward Current TJ = 125° C 1 TJ = 100° C TJ = 75° C 0.1 TJ = 50° C 0.01 TJ = 25° C 0.001 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 1.6 1.2 0.8 DC RMS Limit 0.4 0 0.0001 20 40 VR - Reverse Voltage (V) Fig. 2 - - Typical Values of Reverse Current vs. Reverse Voltage 100 TJ = 25 °C 10 40 VR - Reverse Voltage (V) Fig. 3 - - Typical Junction Capacitance vs. Reverse Voltage 2 3 Fig. 5 - Forward Power Loss Characteristics 1000 20 1 Average Forward Current - IF(AV) (A) 93280_05 93280_02 0 0 60 60 IFSM - Non-Repetitive Surge Current (A) 0 CT - Junction Capacitance (pF) 1 IF(AV) - Average Forward Current (A) 93280_04 100 93280_03 Square wave (D = 0.50) 80 % rated VR applied 60 1000 100 At Any Rated Load Condition And With rated VRRM Applied Following Surge 10 10 93280_06 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 6 - Maximum Non-Repetitive Surge Current Note Formula used: TL = TJ - (Pd + PdREV) x RthJL; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 5); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) Revision: 21-Sep-11 Document Number: 93280 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-21DQ06, VS-21DQ06-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 21 D Q 06 TR -M3 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - 21 = Current Rating, 2 A 3 - D = DO-41 package 4 - Q = Schottky Q.. series 5 - 06 = Voltage rating: 60 V 6 - TR = Tape and reel package TB = Tape and ammo box package None = Bulk package 7 - Environmental digit None = Lead (Pb)-free and RoHS compliant -M3 = Halogen-free, RoHS compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY VS-21DQ06 1000 1000 PACKAGING DESCRIPTION Bulk VS-21DQ06TR 5000 5000 Tape and reel VS-21DQ06TB 3000 3000 Tape and ammo box VS-21DQ06-M3 1000 1000 Bulk VS-21DQ06TR-M3 5000 5000 Tape and Reel VS-21DQ06TB-M3 3000 3000 Tape and ammo box LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95241 Part marking information www.vishay.com/doc?95304 Packaging information www.vishay.com/doc?95338 Revision: 21-Sep-11 Document Number: 93280 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors Axial DO-204AL (DO-41) DIMENSIONS in millimeters (inches) 2.70 (0.106) DIA. 2.29 (0.090) Cathode band 27.0 (1.06) MIN. (2 places) 5.21 (0.205) MAX. 27.0 (1.06) MIN. (2 places) 1.27 (0.050) MAX. Flash (2 places) 5.21 (0.205) MAX. 0.86 (0.034) DIA. 0.72 (0.028) (2 places) 0.86 (0.034) DIA. 0.72 (0.028) (2 places) 2.70 (0.106) DIA. 2.29 (0.090) Revision: 29-Aug-11 Document Number: 95241 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000