tm FDS6688AS 30V N-Channel PowerTrench® SyncFET™ General Description Features The FDS6688AS is designed to replace a single SO-8 MOSFET and Schottky diode in synchronous DC:DC power supplies. This 30V MOSFET is designed to maximize power conversion efficiency, providing a low RDS(ON) and low gate charge. The FDS6688AS includes an integrated Schottky diode using Fairchild’s monolithic SyncFET technology. • 14.5 A, 30 V. RDS(ON) max= 6.0 mΩ @ VGS = 10 V RDS(ON) max= 7.3 mΩ @ VGS = 4.5 V • Includes SyncFET Schottky body diode • Low gate charge (45nC typical) • High performance trench technology for extremely low RDS(ON) and fast switching Applications • DC/DC converter • High power and current handling capability • Low side notebook • RoHS Compliant D D D D SO-8 S S S G Absolute Maximum Ratings Symbol 5 4 6 3 7 2 8 1 TA=25oC unless otherwise noted Ratings Units VDSS Drain-Source Voltage Parameter 30 V VGSS Gate-Source Voltage ±20 V ID Drain Current (Note 1a) 14.5 A PD Power Dissipation for Single Operation (Note 1a) 2.5 (Note 1b) 1.2 – Continuous – Pulsed 50 (Note 1c) TJ, TSTG W 1 –55 to +150 °C (Note 1a) 50 °C/W (Note 1) 25 Operating and Storage Junction Temperature Range Thermal Characteristics RθJA Thermal Resistance, Junction-to-Ambient RθJC Thermal Resistance, Junction-to-Case Package Marking and Ordering Information Device Marking Device FDS6688AS FDS6688AS ©2008 Fairchild Semiconductor Corporation Reel Size 13’’ Tape width 12mm Quantity 2500 units FDS6688AS Rev C FDS6688AS 30V N-Channel PowerTrench® SyncFET™ November 2008 Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain–Source Breakdown Voltage Breakdown Voltage Temperature Coefficient VGS = 0 V, Zero Gate Voltage Drain Current VDS = 24 V, VGS = 0 V 500 µA Gate–Body Leakage VGS = ±20 V, VDS = 0 V ±100 nA Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain–Source On–Resistance VDS = VGS, ID = 1 mA ID(on) On–State Drain Current VGS = 10 V, VDS = 5 V gFS Forward Transconductance VDS = 10 V, ID = 14.5 A ∆BVDSS ∆TJ IDSS IGSS On Characteristics VGS(th) ∆VGS(th) ∆TJ RDS(on) ID = 1 mA 30 V 20 ID = 10 mA, Referenced to 25°C mV/°C (Note 2) 1.5 –4 3 ID = 10 mA, Referenced to 25°C 1 VGS = 10 V, ID = 14.5 A VGS = 4.5 V, ID = 13.2 A VGS=10 V, ID =14.5A, TJ=125°C 4.5 5.9 6.7 6.0 7.3 8.5 V mV/°C 50 mΩ A 66 S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance RG Gate Resistance Switching Characteristics VDS = 15 V, f = 1.0 MHz VGS = 15 mV, V GS = 0 V, f = 1.0 MHz 2510 pF 710 pF 270 pF 1.6 Ω 2.8 (Note 2) td(on) Turn–On Delay Time tr Turn–On Rise Time td(off) Turn–Off Delay Time 43 69 ns tf Turn–Off Fall Time 29 46 ns td(on) Turn–On Delay Time tr Turn–On Rise Time td(off) Turn–Off Delay Time 34 54 ns tf Turn–Off Fall Time 29 46 ns Qg(TOT) Total Gate Charge at Vgs=10V 45 63 nC Qg Total Gate Charge at Vgs=5V 25 35 Qgs Gate–Source Charge 7 nC Qgd Gate–Drain Charge 8 nC VDD = 15 V, VGS = 10 V, VDD = 15 V, VGS = 4.5 V, VDD = 15 V, ID = 1 A, RGEN = 6 Ω ID = 1 A, RGEN = 6 Ω ID = 14.5 A, 10 20 ns 12 22 ns 17 31 ns 22 35 ns nC FDS6688AS Rev C FDS6688AS 30V N-Channel PowerTrench® SyncFET™ Electrical Characteristics Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Typ Max Units Drain–Source Diode Characteristics and Maximum Ratings VSD trr Drain–Source Diode Forward Voltage Diode Reverse Recovery Time IRM Diode Reverse Recovery Current Qrr Diode Reverse Recovery Charge VGS = 0 V, IS = 3.5 A VGS = 0 V, IS = 7 A IF = 14.5A, diF/dt = 300 A/µs (Note 2) (Note 2) (Note 3) 0.4 0.5 27 0.7 V nS 1.9 A 26 nC Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design while RθCA is determined by the user's board design. a) 50°/W when mounted on a 1 in2 pad of 2 oz copper b) 105°/W when mounted on a .04 in2 pad of 2 oz copper FDS6688AS Rev C FDS6688AS 30V N-Channel PowerTrench® SyncFET™ Electrical Characteristics 50 2.4 3.5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) VGS = 10V 40 6.0V 4.5V 3.0V 30 20 10 2.5V 0 VGS = 3.0V 2 1.8 1.6 3.5V 1.4 4.0V 4.5V 1.2 6.0V 10V 1 0.8 0 0.25 0.5 0.75 VDS, DRAIN-SOURCE VOLTAGE (V) 1 0 Figure 1. On-Region Characteristics. 20 30 ID, DRAIN CURRENT (A) 40 50 0.016 ID = 7.3 A RDS(ON), ON-RESISTANCE (OHM) ID = 14.5A VGS =10V 1.2 1 0.8 0.6 0.014 0.012 0.01 o TA = 125 C 0.008 0.006 TA = 25oC 0.004 -55 -35 -15 5 25 45 65 85 o TJ, JUNCTION TEMPERATURE ( C) 105 125 2 Figure 3. On-Resistance Variation with Temperature. 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 100 50 VGS = 0V IS, REVERSE DRAIN CURRENT (A) VDS = 5V 40 ID, DRAIN CURRENT (A) 10 Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 1.4 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2.2 30 TA = 125oC -55oC 20 o 25 C 10 0 10 o TA = 125 C 1 25oC 0.1 -55oC 0.01 0.001 1 1.5 2 2.5 3 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 3.5 0 0.2 0.4 0.6 VSD, BODY DIODE FORWARD VOLTAGE (V) 0.8 Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDS6688AS Rev C FDS6688AS 30V N-Channel PowerTrench® SyncFET™ Typical Characteristics 3500 ID = 14.5A f = 1MHz VGS = 0 V 3000 8 VDS = 10V CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 10 20V 6 15V 4 2500 Ciss 2000 1500 Coss 1000 2 500 Crss 0 0 0 10 20 30 Qg, GATE CHARGE (nC) 40 50 0 Figure 7. Gate Charge Characteristics. 10 15 20 25 VDS, DRAIN TO SOURCE VOLTAGE (V) 30 Figure 8. Capacitance Characteristics. 100 P(pk), PEAK TRANSIENT POWER (W) 50 RDS(ON) LIMIT 100us 1ms 10 10ms 100ms 1s 10s 1 DC VGS = 10V SINGLE PULSE o RθJA = 125 C/W 0.1 o TA = 25 C 0.01 0.01 0.1 1 10 VDS, DRAIN-SOURCE VOLTAGE (V) 100 SINGLE PULSE RθJA = 125°C/W TA = 25°C 40 30 20 10 0 0.001 Figure 9. Maximum Safe Operating Area. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE ID, DRAIN CURRENT (A) 5 0.01 0.1 1 t1, TIME (sec) 10 100 1000 Figure 10. Single Pulse Maximum Power Dissipation. 1 D = 0.5 RθJC(t) = r(t) * RθJC RθJC = 125 °C/W 0.2 0.1 0.1 0.05 P(pk 0.02 0.01 t1 t2 0.01 TJ - TC = P * RθJC(t) Duty Cycle, D = t1 / t2 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient thermal response will change depending on the circuit board design. FDS6688AS Rev C FDS6688AS 30V N-Channel PowerTrench® SyncFET™ Typical Characteristics (continued) SyncFET Schottky Body Diode Characteristics Schottky barrier diodes exhibit significant leakage at high temperature and high reverse voltage. This will increase the power in the device. 0.1 0.8A/DIV IDSS, REVERSE LEAKAGE CURRENT (A) Fairchild’s SyncFET process embeds a Schottky diode in parallel with PowerTrench MOSFET. This diode exhibits similar characteristics to a discrete external Schottky diode in parallel with a MOSFET. Figure 12 shows the reverse recovery characteristic of the FDS6688AS. TA = 125oC 0.01 0.001 TA = 100oC 0.0001 TA = 25oC 0.00001 0 10nS/DIV Figure 12. FDS6676AS SyncFET body diode reverse recovery characteristic. 5 10 15 20 VDS, REVERSE VOLTAGE (V) 25 Figure 14. SyncFET body diode reverse leakage versus drain-source voltage and temperature. 0.8A/DIV For comparison purposes, Figure 13 shows the reverse recovery characteristics of the body diode of an equivalent size MOSFET produced without SyncFET (FDS6688). 10nS/DIV Figure 13. Non-SyncFET (FDS6688) body diode reverse recovery characteristic. FDS6688AS Rev C 30 FDS6688AS 30V N-Channel PowerTrench® SyncFET™ Typical Characteristics (continued) L VDS BVDSS tP VGS RGE + DUT VGS VDS IAS VDD VDD - 0V tp vary tP to obtain required peak IAS IAS 0.01Ω tAV Figure 15. Unclamped Inductive Load Test Circuit Figure 16. Unclamped Inductive Waveforms Same type as + - + VDD - VGS QG(TOT) 10V DUT QGD QGS VGS Ig(REF Charge, (nC) Figure 17. Gate Charge Test Circuit Figure 18. Gate Charge Waveform tON VDS VGS RGEN td(ON) RL VDS tr 90% tOFF td(OFF tf ) 90% + VDD DUT VGSPulse Width ≤ 1µs Duty Cycle ≤ 0.1% Figure 19. Switching Time Test Circuit - 10% 0V 90% VGS 0V 10% 50% 10% 50% Pulse Width Figure 20. Switching Time Waveforms FDS6688AS Rev C FDS6688AS 30V N-Channel PowerTrench® SyncFET™ Typical Characteristics TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidianries, and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CorePOWER™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® EfficentMax™ EZSWITCH™ * FPS™ F-PFS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® ™ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter® * ® PDP-SPM™ Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ Quiet Series™ RapidConfigure™ Saving our world 1mW at a time™ SmartMax™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SuperMOS™ ® The Power Franchise® tm TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® Ultra FRFET™ UniFET™ VCX™ VisualMax™ tm * EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I34 FDS6688AS Rev.C