Industrial Power Supplies TIS Series 75 - 600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies with EN50081-2 and EN50082-2 Conducted EMI to EN55011 class B For system operation available with built-in functions: RED: Redundancy module for N+1 systems with true current sharing. SIG: Signal module with AC-Powerfail, DC- OK Signal and The switching power supplies of the TIS series have been particulary deexternal ON/OFF control signed for applications in industrial process control systems and machine tools. Excellent specifications and high immunity against electrical disturUDS: DC-UPS module for uninterbances guarantee reliable power for sensitive loads in rugged industrial ruptable battery backed-up environments. With help of optional function modules specific requirements power systems. for system applications can be met by a standard product. With the UDS Worldwide Safety Approvals module the power supplies can be extended to a perfect DC-UPS with autoEasy snap-on mounting on DIN-rails matic battery- backup. This function is very often required in applications or chassis mounting where a time delayed shutdown of a system is necessary. To monitor and 2 Year Product Warranty control the power supply a signal module can be installed. For parallel operation with active power sharing a redundancy option is available. This flexibility makes the TIS series power supplies a cost effective solution for many industrial applications. Models Ordercode (includes terminal plugs) Input Voltage Output Power max. Output Voltage nom. Output Current max. 6.0 A 3.0 A 1.5 A TIS 75-112 TIS 75-124 TIS 75-148 115 / 230 VAC selectable 75 W 12 VDC 24 VDC 48 VDC TIS 150-124 TIS 150-148 115 / 230 VAC selectable 150 W 24 VDC 48 VDC 6.0 A 3.0 A TIS 300-124 TIS 300-148 TIS 300-172 115 / 230 VAC selectable 300 W 24 VDC 48 VDC 72 VDC 12 A 6.0 A 4.2 A TIS 500-124 230 VAC 500 W 24 VDC 20 A TIS 600-124 TIS 600-128 TIS 600-148 TIS 600-172 115 / 230 VAC selectable 600 W 24 28 48 72 VDC VDC VDC VDC 24 A 22 A 12 A 8.5 A TIS 300-124 DCI 300 - 800 VDC 300 W 24 VDC 12 A http://www.tracopower.com Page 1 Industrial Power Supplies TIS Series 75-600 Watt Input Specifications Input voltage range – TIS 75, TIS 150, TIS 300, TIS 600 – TIS 500 – TIS 300 DCI 93 – 132 VAC / 187 – 264 VAC 187 – 264 VAC 300 – 800 VDC Input frequency 47 – 63 Hz Input current at full load (typ.) – TIS 75 – TIS 150 – TIS 300 – TIS 500 – TIS 600 115 VAC 1.7 A 3.0 A 5.4 A 230 VAC 0.9 A 1.7 A 3.3 A 5.5 A 6.4 A 10.5 A Inrush current (< 2 ms) – TIS 75 – TIS 150 – TIS 300 – TIS 500 – TIS 600 115 VAC < 16.5 A < 35 A < 35 A < 70 A 230 VAC < 33 A < 70 A < 70 A < 70 A < 80 A Output Specifications Output voltage adj. range – – – – – 12 24 28 48 72 VDC VDC VDC VDC VDC models models models models models Regulation – Input variation – Load variation (10 – 90 %) 12 24 28 48 60 – – – – – 14 28 32 52 76 VDC VDC VDC VDC (48 – 55 VDC on request)) VDC ± 0.2 % max. – TIS 75, TIS 150 – TIS 300, TIS 500, TIS 600 ± 1.0 % max. ± 0.3 % max. (± 1.5 % in parallel operation) Ripple and Noise (20MHz Bandwidth) < 50 mV pk-pk Electronic short circuit protection current limitation at 110 % typ. (constant current, automatic restart) Overvoltage protection, triggerpoint at 140 % typ. Vout nom. Hold-up time – TIS 75 ... TIS 300 – TIS 500 – TIS 600 115 VAC min. 25 ms min. 15 ms 230 VAC min. 30 ms min. 40 ms min. 25 ms All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 Industrial Power Supplies TIS Series 75-600 Watt General Specifications Temperature ranges – Operating (ambient temp.) – Derating above 50 °C – Storage (non operating) – 25 °C…+70 °C max. 2% /°C – 25 °C…+ 85 °C Humidity (non condensing) 95 % rel H max. Temperature coefficient 0.02 % / °C Switching frequency 80 kHz typ. (Pulswidth modulation) Efficiency – TIS 75 ... TIS 300 – TIS 500 85 % typ. 90 % typ. – TIS 600 88 % typ. Isolation according to EN 60950, UL 1950, UL 508C Reliability, calculated MTBF (MIL-HDBK-217 E) – TIS 75 /150 – TIS 300 /500 – TIS 600 450000 h @ +25°C/ 420000 h @ +25°C 360000 h @ +25°C/ 340000 h @ +25°C 300000 h @ +25°C Safety standards IEC 60950, EN 60950 (SELV), UL/cUL 1950, UL 508C Safety approvals UL/cUL 1950 recognized, File E18138 UL/cUL 508C listed, File E210002 UL/cuL 1604 listed, File E213613 (Class I,Division 2, Groups A, B, C and D hazardous locations) CB-Scheme Electromagnetic compatibility (EMC), Emissions – Conducted RI suppression on input EN 50081-1 / EN 50081-2 EN 55011 class B, EN 55022 class B, FCC part 15, level B EN 55011 class A, EN 55022 class A, FCC part 15, level A – Radiated RI suppression Electromagnetic compatibility (EMC), Immunity – Electrostatic discharge (ESD) – Radiated RF field immunity – Electrical fast transient / burst immunity – Surge immunity – Immunity to conducted RF disturbances – Power frequency field immunity EN 50082-2 IEC / EN 61000-4-2 IEC / EN 61000-4-3 IEC / EN 61000-4-4 IEC / EN 61000-4-5 IEC / EN 61000-4-6 IEC / EN 61000-4-8 Safety class Degree of Protection 1 (IEC 536) Case protection IP 20 (IEC 529) Environment – Vibration – Shock 4 kV / 8 kV 10 V / m 2 kV 2 kV / 4 kV 10 V 30 A / m IEC 60068-2-6,1 gn, 200 sweeps, each axis IEC 60068-2-27, 15 gn, 11 ms, each axis Enclosure material Aluminium (chassis) / stainless steel (cover) Mounting (snap-on with selflocking spring) for 35 mm DIN-rails as per EN 50022 Connection Plugable screw terminals (plugs included) (TIS 600: screw terminal blocks) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 Industrial Power Supplies TIS Series 75-600 Watt Optional Power Supplies Mounting withSystems Redundancy Dimensions Function mm (inches) With this option a parallel operation of up to 5 units is possible. Decoupling diodes and current share lines allow to build true N +1 redundant systems with active current sharing for all units. This function also includes an alarm relay to signal a single unit failure. This option is available for TIS 150 W, TIS 300 W and TIS 600 W models. Please note: A combination with other options is not possible. Models Output Power max. Output Voltage nom. Output Current max. TIS 150-124 RED TIS 150-148 RED 115 / 230 VAC selectable 150 W 24 VDC 18 VDC 6.0 A 12 A TIS 300-124 RED TIS 300-148 RED 115 / 230 VAC selectable 300 W 24 VDC 48 VDC 12 A 6.0 A TIS 600-124 RED TIS 600-148 RED 115 / 230 VAC selectable 600 W 24 VDC 48 VDC 24 A 12 A L N Con1 Pin3 Con1 Pin2 Con2 - Pin3/4 AC Bus Indicator DC Con2 - Pin1/2 +Vout 24/48VDC Input Voltage 115/230VAC Ordercode (includes terminal plugs) -Vout Con1 Pin1 I-Sense V-Sense Con3 - Pin4 Con3 - Pin3 Con3 - Pin2 Con3 - Pin1 Regulator Current Shareline Unit OK Common Unit OK Unit OK Specifications Raiting per relay contact 60 VDC /0.36 A max. Specifications can be changed without notice http://www.tracopower.com Page 4 Industrial Power Supplies TIS Series 75-600 Watt Power Supplies with Powerfail Functions These models provide 3 functions required in many process control system applications: • AC-Powerfail signal (relay contact) • DC-OK signal (relay contact) • Remote ON/OFF Models Output Power max. Output Voltage nom. Output Current max. 115 / 230 VAC selectable 150 W 24 VDC 48 VDC 6.0 A 3.0 A TIS 300-124 SIG TIS 300-148 SIG 115 / 230 VAC selectable 300 W 24 VDC 48 VDC 12 A 6.0 A TIS 600-124 SIG TIS 600-148 SIG 115 / 230 VAC selectable 600 W 24 VDC 48 VDC 24 A 12 A L N Con1 Pin3 Con2 - Pin3/4 AC Con1 Pin2 +Vout 24/48VDC TIS 150-124 SIG TIS 150-148 SIG Output OK DC Con2 - Pin1/2 Con1 Pin1 Con3 - Pin2 + Con3 - Pin1 Remote ON/OFF - Con3 - Pin7 Con3 - Pin6 Mains Fail Detection -Vout Remote ON/OFF Input Voltage 115/230VAC Ordercode (includes terminal plugs) Common AC-Powerfail Mains OK (Relay A) Con3 - Pin5 Con3 - Pin4 Con3 - Pin3 DC-OK Detection (Relay B) DC-OK Common DC-OK DC-OK Specifications DC-OK signal trigger point – Models with 24 Vout – Models with 48 Vout > 22.8 VDC ± 0.5 V > 45.6 VDC ± 1.0 V relay B closed (pin 4 – pin 3) relay B closed (pin 4 – pin 3) AC-Powerfail signal Vin < 93 resp. < 187 VAC relay A closed (pin 7 – pin 6) Raiting per relay contact 60 VDC /0.36 A max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 5 Industrial Power Supplies TIS Series 75-600 Watt DC-UPS-System In addition to the standard power supply function, these models include a professional battery management system to charge and monitor an external battery. In case of a power failure the battery is switched automatically and without any interruption to the DC-output. If mains power is available again, the battery is switched off. The hold-up time is limited only by battery capacity and load. Charge current and voltage can be adjusted to values as required by battery type. Power fail and low battery alarm signals are available via two independent relay contacts. During normal operation the battery status is monitored by periodically loading the battery for short time. If a cell resistance is high, there is a relay alarm available. The battery is fully protected under any operational conditions. The power supply is short circuit protected even in batterybackup operation, however for safety reason the battery should be fused with a fast blow fuse. Battery mode can be activated by connection of Pin 7 and 8. Complete external battery modules (3.2 Ah or 7 Ah standard) with lead batteries are available on request. Models Ordercode (includes terminal plugs) Input Voltage Output Power max. Output Voltage nom. Output Current max. TIS 300-124 UDS 115 / 230 VAC selectable 300 W 24 VDC 12 A TIS 600-124 UDS 115 / 230 VAC selectable 600 W 24 VDC 24 A All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 6 Industrial Power Supplies TIS Series 75-600 Watt DC-UPS-System Battery + Con3 - Pin2 V Battery Charger L N I Con1 Pin3 AC Con1 Pin2 Con2 - Pin3/4 Output OK DC Con2 - Pin1/2 Con1 Pin1 +Vout 24VDC 115/230VAC Battery - Con3 - Pin1 -Vout VBat>18V Bat ON/OFF Mains Fail Battery Switch Logic Con4 Pin8 Battery ON/OFF Con4 - Pin3 Con4 - Pin2 Con4 - Pin1 Mains Fail Detection Con4 Pin7 AC-Powerfail Common AC-Power OK AC-Powerfail (Relay A) Con4 - Pin6 Con4 - Pin5 Con4 - Pin4 Battery Test Battery Low / failure Common Battery OK Low Battery (Relay B) Specifications Charging current (factory set) – TIS 300-124 UDS – TIS 600-124 UDS 1.2 A 2.4 A Adjustment range of charging current – TIS 300-124 UDS – TIS 600-124 UDS 0.15...1.5 A 0.25...2.5 A Holding current for charging battery atvoltage 27.3 VDC < 50 mA Overload at short circuit during battery operation system switches off AC-Powerfail signal Vin < 93 resp. < 187 VAC relay A closed (pin 2 – pin 3) Low battery signal Battery voltage below 22 V relay B closed (pin 5 – pin 6) Raiting per relay contact During battery charge operation 60 VDC /0.36 A max. output current reduction by 1.4 x battery charge current All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 7 Industrial Power Supplies TIS Series 75-600 Watt Battery-Pack for DC-UPS Systems The Battery Pack contains high quality, maintenance free lead-acid batteries with 3.2 Ah resp. 7.0 Ah capacity. The batteries are fixed together with a re-settable electronic fuse on a solid mounting frame. Together with power supply models TIS 300-124 UDS or TIS 600-124 UDS the battery pack provides a complete and reliable DC-UPS system. Backup time is depending on load current and battery capacity. Models Ordercode Battery Voltage Battery Capacity (25°C, 20h-rate) Permissable Charge Current max. TIS 24-32 AP TIS 24-70 AP 24 VDC 24 VDC 3.2 Ah 7.0 Ah 1.2 A 2.4 A Specifications Max. charge voltage 27...27.6 VDC Temperature coefficient – 36mV /°C Temperature range – at charge operation – at load operation – Storage – 15 °C...+50 °C – 20 °C...+60 °C – 20 °C...+60 °C Average lifetime on standby operation at tA =20 °C 4...5 years Cable length 1.0 m Cable diameter – TIS 24-32 AP – TIS 24-70 AP 2.5 mm2 (AWG 12) 4.0 mm2 (AWG 11) Weight – TIS 24-32 AP – TIS 24-70 AP 4.6 kg (10.1 lb) 5.9 kg (13.0 lb) Recommended combinations – TIS 24-32 AP (power supplies) – TIS 24-70 AP TIS 300-124 UDS TIS 600-124 UDS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 8 Industrial Power Supplies TIS Series 75-600 Watt Optional Mounting Systems Dimensions mm (inches) TIS 150 TIS-75-124 24VDC / 3 A OUTPUT Output Nom. Voltage: 24 VDC Nom. Current: 3 A Output O K CAUTION 53.7 Do not open. Risk of high voltage. Read instruction manual. Check line selection switch before connection. +– Industrial Switching Power Supply TIS150-124 24VDC / 6 A Output Input Nom. Freq.: 50/60 Hz Nom. Voltage: 115/230 VAC Nom. Current: 3,7/1,7 A NL 56.7 (2.23) 90 (3.54) Nom. Voltage: 24 VDC Nom. Current: 6 A Output O K CAUTION Do not open. Risk of high voltage. Read instruction manual. Check line selection switch before connection. 53.7 Industrial Switching Power Supply +– 114.6 (4.51) adj Nom. Freq.: 50/60 Hz Nom. Voltage: 115/230 VAC Nom. Current: 1,7/0,9 A (2.11) 114.6 (4.51) L N INPUT (2.11) TIS 75 56.7 (2.23) 157 (6.18) 45 (1.77) 38.5 80 (3.15) (0.27) 6.8 56.7 (2.23) (0.27) 6.8 56.7 (2.23) (1.52) Weight: TIS 75 0.48 kg (1.06 lb) TIS 150 0.80 kg (1.76 lb) TIS 300 TIS 300-124 24VDC / 12A Output Input Nom. Freq.: 50/60 Hz Nom. Voltage: 115/230 VAC Nom. Current: 5,4/3,3 A NL Output O K CAUTION Do not open. Risk of high voltage. Read instruction manual. Check line selection switch before connection. 53.7 Industrial Switching Power Supply (2.11) 114.6 (4.51) ++ – – Nom. Voltage: 24 VDC Nom. Current: 12 A 207 (8.15) 38.5 83 (3.27) 130 (5.12) (0.27) 6.8 83 (3.27) (1.52) Weight: TIS 300 Specifications can be changed without notice http://www.tracopower.com 1.4 kg (3.09 lb) Tolerances: ± 0.5 mm (±0.02) Page 9 Industrial Power Supplies TIS Series 75-600 Watt Optional Mounting Systems Dimensions mm (inches) TIS 500 TIS 500-124 24VDC / 20A ++ – – NL Nom. Freq.: 50/60 Hz Nom. Voltage: 230 VAC Nom. Current: 5,3 A Input 75 (2.95) 130 (5.12) CAUTION Do not open. Risk of high voltage. Read instruction manual. Industrial Switching Power Supply Nom. Voltage: 24VDC Nom. Current: 20 A Output 83 (3.27) 220 (8.66) 46 (1.81) 130 (5.12) (0.27) 83 (3.27) 6.8 Weight: TIS 500 1.9 kg (4.19 lb) TIS 600 177.2 (6.98) Industrial Switching Power Supply Input TIS 600-124 24VDC / 24A – – ++ Nom. Voltage: 72 VDC Nom. Current: 8 A Output CAUTION Do not open. Risk of high voltage. Read instruction manual. Check line selection switch before connection. 120.2 (4.73) NL Nom. Freq.: 50/60 Hz Nom. Voltage: 115/230 VAC Nom. Current: 10,5/6,4 A 243 (9.57) 32 82.6 (3.25) 179 (7.05) (1.26) Specifications can be changed without notice http://www.tracopower.com (0.27) 6.8 82.8 (3.26) Weight: TIS 600 2.0 kg (4.41 lb) Tolerances: ± 0.5 mm (±0.02) Page 10 Industrial Power Supplies TIS Series 75-600 Watt Optional Mounting Systems Dimensions mm (inches) Wall mounting A B 7.5 4.6 Models Order code (0.30) E D C (0.18) A B C D E TIS 75W MK-75 37 (1.46) 14.5 (0.57) – 134.5 (5.30) 150.5 (5.93) TIS 150W MK-150 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 300W MK-300 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 500W MK-500 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 600W MK-600 190 (7.48) 37.5 (1.48) 115 (4.53) 197.0 (7.76) 207.0 (8.15) Rugged DIN-Rail mounting A B Models countersink M4 25 (0.98) 50.1 (1.97) 4.2 (0.17) C Order code A B C TIS 150W RMK-150 t.b.a. t.b.a. t.b.a. TIS 300W RMK-300 t.b.a. t.b.a. t.b.a. TIS 500W RMK-500 t.b.a. t.b.a. t.b.a. TIS 600W standard 180 (7.09) 165 (6.50) 15.0 (0.59) Specifications can be changed without notice http://www.tracopower.com Tolerances: ± 0.5 mm (±0.02) Page 11 Industrial Power Supplies TIS Series 75-600 Watt Outline Dimensions mm (inches) 204 (8.03) TIS-24-32 AP 14 184 (7.24) (0.55) Detail A 7 7 12 Detail B 9 (0.28) 69 (2.72) (0.47) 5.8 B (0.35) B 135 (5.14) A 100 (3.94) A (0.23) (0.28) Weight (incl. batteries): TIS-24-32 AP 4.6 kg (10.1 lb) TIS-24-70 AP 5.9 kg (13.0 lb) 272 (10.71) TIS-24-70 AP A B B 69 (2.72) 100 (3.94) A 152 (5.98) 252 (9.92) Specifications can be changed without notice Tolerances: ± 0.5 mm (±0.02) Rev. 05/01 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com Page 12