DIODES MMBT3906LP-7

MMBT3906LP
ADVANCE INFORMATION
40V PNP SMALL SIGNAL SURFACE MOUNT TRANSISTOR
Features
Mechanical Data
•
•
•
•
•
•
•
Complementary NPN Type Available (MMBT3904LP)
Ultra-Small Leadless Surface Mount Package
“Lead Free”, RoHS Compliant (Note 1)
Halogen and Antimony Free. "Green" Device (Note 2)
ESD rating: 200V-MM, 4KV-HBM
•
•
•
Case: DFN1006-3
Case Material: Molded Plastic, "Green" Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish ⎯ NiPdAu over Copper leadframe. Solderable
per MIL-STD-202, Method 208
Weight: 0.008 grams (approximate)
C
DFN1006-3
B
B
C
E
E
Bottom View
Device Symbol
Top View
Device Schematic
Ordering Information
Product
MMBT3906LP-7
MMBT3906LP-7B
Notes:
Marking
3N
3N
Reel size (inches)
7
7
Tape width (mm)
8mm
8mm
Quantity per reel
3,000
10,000
1. No purposefully added lead.
2. Diodes Inc's "Green" policy can be found on our website at http://www.diodes.com.
3. For packaging details, go to our website at http://www.diodes.com.
Marking Information
MMBT3906LP-7
3N
Top View
Dot Denotes
Collector Side
MMBT3906LP
Document number: DS31836 Rev. 3 - 2
MMBT3906LP-7B
3N
3N = Product Type Marking Code
Top View
Bar Denotes Base
and Emitter Side
1 of 5
www.diodes.com
February 2011
© Diodes Incorporated
MMBT3906LP
Maximum Ratings @TA = 25°C unless otherwise specified
Symbol
VCBO
VCEO
VEBO
IC
Value
-40
-40
-5.0
-200
Unit
V
V
V
mA
Symbol
PD
RθJA
TJ, TSTG
Value
250
500
-55 to +150
Unit
mW
°C/W
°C
Thermal Characteristics
Characteristic
Power Dissipation (Note 4)
Thermal Resistance, Junction to Ambient (Note 4)
Operating and Storage and Temperature Range
Notes:
4. Device mounted on FR-4 PCB, pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com
r(t), TRANSIENT THERMAL RESISTANCE
1
D = 0.9
D = 0.7
D = 0.5
D = 0.3
0.1
D = 0.1
RθJA(t) = r(t) * RθJA
RθJA = 500°C/W
D = 0.05
P(pk)
0.01
D = 0.02
t1
t2
TJ - TA = P * RθJA(t)
Duty Cycle, D = t1/t2
D = 0.01
D = 0.005
0.001
1E-06
D = Single Pulse
0.00001
0.0001
0.001
0.01
0.1
1
10
t1, PULSE DURATION TIME (s)
Fig. 1 Transient Thermal Response
1,000
100
1,000
10,000
0.30
Single Pulse
RθJA(t) = r(t) * RθJA
RθJA = 500°C/W
100
PD, POWER DISSIPATION (W)
P(pk), PEAK TRANSIENT POWER (W)
ADVANCE INFORMATION
Characteristic
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current - Continuous (Note 4)
T J - T A = P * RθJA(t)
10
1
0.25
0.20
0.15
0.10
0.05
0.1
1E-06
0.0001
0.01
1
100
10,000
t1, PULSE DURATION TIME (s)
Fig. 2 Single Pulse Maximum Power Dissipation
MMBT3906LP
Document number: DS31836 Rev. 3 - 2
2 of 5
www.diodes.com
0
0
20
40
60
80 100 120 140 160
TA, AMBIENT TEMPERATURE (°C)
Fig. 3 Power Dissipation vs. Ambient Temperature
February 2011
© Diodes Incorporated
MMBT3906LP
Characteristic
OFF CHARACTERISTICS
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage (Note 5)
Emitter-Base Breakdown Voltage
Symbol
Min
Max
Unit
BVCBO
BVCEO
BVEBO
ICEX
ICBO
IBL
-40
-40
-5.0
⎯
⎯
⎯
⎯
⎯
⎯
-50
-50
-50
V
V
V
nA
nA
nA
hFE
60
80
100
60
30
⎯
⎯
300
⎯
⎯
Collector-Emitter Saturation Voltage
VCE(sat)
⎯
-0.25
-0.40
V
Base-Emitter Saturation Voltage
VBE(sat)
-0.65
⎯
-0.85
-0.95
V
Cobo
Cibo
hie
hre
hfe
hoe
⎯
⎯
2.0
0.1
100
3.0
4.5
10
12
10
400
60
pF
pF
kΩ
-4
x 10
⎯
μS
Current Gain-Bandwidth Product
fT
300
⎯
MHz
SWITCHING CHARACTERISTICS
Delay Time
Rise Time
Storage Time
Fall Time
td
tr
ts
tf
⎯
⎯
⎯
⎯
35
35
225
75
ns
ns
ns
ns
Collector Cutoff Current
Base Cutoff Current
ON CHARACTERISTICS (Note 5)
DC Current Gain
SMALL SIGNAL CHARACTERISTICS
Output Capacitance
Input Capacitance
Input Impedance
Voltage Feedback Ratio
Small Signal Current Gain
Output Admittance
Notes:
⎯
Test Condition
IC = -10μA, IE = 0
IC = -1.0mA, IB = 0
IE = -10μA, IC = 0
VCE = -30V, VEB(OFF) = -3.0V
VCB = -30V, IE = 0
VCE = -30V, VEB(OFF) = -3.0V
IC = -100µA, VCE = -1.0V
IC = -1.0mA, VCE = -1.0V
IC = -10mA, VCE = -1.0V
IC = -50mA, VCE = -1.0V
IC = -100mA, VCE = -1.0V
IC = -10mA, IB = -1.0mA
IC = -50mA, IB = -5.0mA
IC = -10mA, IB = -1.0mA
IC = -50mA, IB = -5.0mA
VCB = -5.0V, f = 1.0MHz, IE = 0
VEB = -0.5V, f = 1.0MHz, IC = 0
VCE = 10V, IC = 1.0mA,
f = 1.0kHz
VCE = -20V, IC = -10mA,
f = 100MHz
VCC = -3.0V, IC = -10mA,
VBE(off) = 0.5V, IB1 = -1.0mA
VCC = -3.0V, IC = -10mA,
IB1 = IB2 = -1.0mA
5. Short duration pulse test used to minimize self-heating effect.
0.20
400
IB = -2mA
IB = -1.6mA
0.16
IB = -1.8mA
VCE = 1V
350
TA = 150°C
IB = -1.4mA
hFE, DC CURRENT GAIN
-IC, COLLECTOR CURRENT (A)
ADVANCE INFORMATION
Electrical Characteristics @TA = 25°C unless otherwise specified
IB = -1.2mA
0.12
IB = -1mA
IB = -0.8mA
0.08
IB = -0.6mA
IB = -0.4mA
300
TA = 125°C
250
TA = 85°C
200
T A = 25°C
150
100
TA = -55°C
0.04
IB = -0.2mA
0
0
50
1
2
3
4
5
-VCE, COLLECTOR-EMITTER VOLTAGE (V)
Fig. 4 Typical Collector Current
vs. Collector-Emitter Voltage
MMBT3906LP
Document number: DS31836 Rev. 3 - 2
3 of 5
www.diodes.com
0
0.1
1
10
100
1,000
-IC, COLLECTOR CURRENT (mA)
Fig. 5 Typical DC Current Gain vs. Collector Current
February 2011
© Diodes Incorporated
MMBT3906LP
1
1
-VCE(SAT), COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
-VCE(SAT), COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
IC/IB = 20
T A = 150°C
0.1
T A = 125°C
TA = 85°C
T A = 25°C
TA = -55°C
1
-VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V)
1.2
Gain = 10
1.0
TA = -55°C
T A = 25°C
0.6
TA = 150°C
TA = 125°C
0.4
TA = 85°C
0.2
0.1
T A = 125°C
TA = 85°C
T A = 25°C
TA = -55°C
1
10
100
1,000
-IC, COLLECTOR CURRENT (mA)
Fig. 7 Typical Collector-Emitter Saturation Voltage
vs. Collector Current
10
100
1,000
-IC, COLLECTOR CURRENT (mA)
Fig. 6 Typical Collector-Emitter Saturation Voltage
vs. Collector Current
0.8
T A = 150°C
0.1
0.01
0.1
0.01
-VBE(ON), BASE-EMITTER TURN-ON VOLTAGE (V)
ADVANCE INFORMATION
IC/IB = 10
1
10
100
1,000
-IC, COLLECTOR CURRENT (mA)
Fig. 8 Typical Base-Emitter Saturation Voltage
vs. Collector Current
1.2
Gain = 10
1.0
0.8
0.6
TA = -55°C
T A = 25°C
TA = 150°C
0.4
0.2
0.1
TA = 125°C
TA = 85°C
1
10
100
1,000
-IC, COLLECTOR CURRENT (mA)
Fig. 9 Typical Base-Emitter Saturation Voltage
vs. Collector Current
Package Outline Dimensions
A
A1
D
b1
E
e
b2
L2
MMBT3906LP
Document number: DS31836 Rev. 3 - 2
L3
DFN1006-3
Dim Min
Max Typ
A
0.47
0.53 0.50
A1
0
0.05 0.03
b1
0.10
0.20 0.15
b2
0.45
0.55 0.50
D
0.95 1.075 1.00
E
0.55 0.675 0.60
e
0.35
⎯
⎯
L1
0.20
0.30 0.25
L2
0.20
0.30 0.25
L3
0.40
⎯
⎯
All Dimensions in mm
L1
4 of 5
www.diodes.com
February 2011
© Diodes Incorporated
MMBT3906LP
Suggested Pad Layout
ADVANCE INFORMATION
C
Dimensions
Z
G1
G2
X
X1
Y
C
X1
X
G2
Value (in mm)
1.1
0.3
0.2
0.7
0.25
0.4
0.7
G1
Y
Z
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
MMBT3906LP
Document number: DS31836 Rev. 3 - 2
5 of 5
www.diodes.com
February 2011
© Diodes Incorporated