P4KE6.8 ... P4KE440CA P4KE6.8 ... P4KE440CA Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden Version 2006-05-10 400 W Nominal breakdown voltage Nominale Abbruch-Spannung 6.8...440 V Plastic case Kunststoffgehäuse 6.3±0.1 Type 62.5±0.5 Ø 3±0.05 Peak pulse power dissipation Maximale Verlustleistung DO-15 (DO-204AC) Weight approx. Gewicht ca. Ø 0.8 ±0.05 Dimensions - Maße [mm] 0.4 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Standard packaging taped in ammo pack Standard Lieferform gegurtet in ammo-Pack For bidirectional types (add suffix “C” or “CA”), electrical characteristics apply in both directions. Für bidirektionale Dioden (ergänze Suffix “C” oder “CA”) gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 µs waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 µs) TA = 25°C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 75°C PM(AV) 1 W 2) Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle TA = 25°C IFSM 40 A 3) VBR ≤ 200 V VBR > 200 V VF VF < 3.0 V 3) < 6.5 V 3) Junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS -50...+175°C -50...+175°C Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft RthA < 45 K/W 2) Thermal resistance junction to leadsl Wärmewiderstand Sperrschicht – Anschlussdraht RthL < 15 K/W Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung 1 IF = 25 A 400 W 1) Non-repetitive pulse see curve IPP = f (t) / PPP = f (r) Höchstzulässiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t) 2 3 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden Unidirectional diodes only – Nur für unidirektionale Dioden © Diotec Semiconductor AG http://www.diotec.com/ 1 P4KE6.8 ... P4KE440CA Maximum ratings Type Typ P4KE6.8 Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM VBR [V] VWM [V] ID [µA] VC [V] IPPM [A] Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) 6.8 ± 10% 6.12...7.48 *) 5.5 1000 10.8 38.0 P4KE6.8A 6.8 ± 5% 6.45...7.14 *) 5.8 1000 10.5 40.0 P4KE7.5 7.5 ± 10% 6.75...8.25 *) 6.0 500 11.7 35.0 P4KE7.5A 7.5 ± 5% 7.13...7.88 *) 6.4 500 11.3 37.0 P4KE8.2 8.2 ± 10% 7.38...9.02 *) 6.6 200 12.5 33.0 P4KE8.2A 8.2 ± 5% 7.79...8.61 *) 7.0 200 12.1 34.0 P4KE9.1 9.1 ± 10% 8.19...10.0 7.3 50 13.8 30.0 P4KE9.1A 9.1 ± 5% 8.65...9.55 7.7 50 13.4 31.0 P4KE10 10 ± 10% 9.0...11.0 8.1 10 15.0 28.0 P4KE10A 10 ± 5% 9.5...10.5 8.5 10 14.5 29.0 P4KE11 11 ± 10% 9.9...12.1 8.9 5 16.2 26.0 P4KE11A 11 ± 5% 10.5...11.6 9.4 5 15.6 27.0 P4KE12 12 ± 10% 10.8...13.2 9.7 5 17.3 24.0 P4KE12A 12 ± 5% 11.4...12.6 10.2 5 16.7 25.0 P4KE13 13 ± 10% 11.7...14.3 10.5 5 19.0 22.0 P4KE13A 13 ± 5% 12.4...13.7 11.1 5 18.2 23.0 P4KE15 15 ± 10% 13.5...16.5 12.1 5 22.0 19.0 P4KE15A 15 ± 5% 14.3...15.8 12.8 5 21.2 21.0 P4KE16 16 ± 10% 14.4...17.6 12.9 5 23.5 17.8 P4KE16A 16 ± 5% 15.2...16.8 13.6 5 22.5 18.6 P4KE18 18 ± 10% 16.2...19.8 14.5 5 26.5 16.0 P4KE18A 18 ± 5% 17.1...18.9 15.3 5 25.2 16.5 P4KE20 20 ± 10% 18.0...22.0 16.2 5 29.1 14.0 P4KE20A 20 ± 5% 19.0...21.0 17.1 5 27.7 15.0 P4KE22 22 ± 10% 19.8...24.2 17.8 5 31.9 13.0 P4KE22A 22 ± 5% 20.9...23.1 18.8 5 30.6 13.7 P4KE24 24 ± 10% 21.6...26.4 19.4 5 34.7 12.0 P4KE24A 24 ± 5% 22.8...25.2 20.5 5 33.2 12.6 P4KE27 27 ± 10% 24.3...29.7 21.8 5 39.1 10.7 P4KE27A 27 ± 5% 25.7...28.4 23.1 5 37.5 11.0 P4KE30 30 ± 10% 27.0...30.0 24.3 5 43.5 9.6 P4KE30A 30 ± 5% 28.5...31.5 25.6 5 41.4 10.0 P4KE33 33 ± 10% 29.7...36.3 26.8 5 47.7 8.8 P4KE33A 33 ± 5% 31.4...34.7 28.2 5 45.7 9.0 P4KE36 36 ± 10% 32.4...39.6 29.1 5 52.0 8.0 P4KE36A 36 ± 5% 34.2...37.8 30.8 5 49.9 8.4 P4KE39 39 ± 10% 35.1...42.9 31.6 5 56.4 7.4 P4KE39A 39 ± 5% 37.1...41.0 33.3 5 53.9 7.7 P4KE43 43 ± 10% 38.7...47.3 34.8 5 61.9 6.7 P4KE43A 43 ± 5% 40.9...45.2 36.8 5 59.3 7.0 P4KE47 47 ± 10% 42.3...51.7 38.1 5 67.8 6.2 P4KE47A 47 ± 5% 44.7...49.4 40.2 5 64.8 6.4 P4KE51 51 ± 10% 45.9...56.1 41.3 5 73.5 5.7 P4KE51A 51 ± 5% 48.5...53.6 43.6 5 70.1 6.0 2 http://www.diotec.com/ © Diotec Semiconductor AG P4KE6.8 ... P4KE440CA Maximum ratings Type Typ Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM VBR [V] VWM [V] ID [µA] VC [V] IPPM [A] Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 µs) P4KE56 56 ± 10% 50.4...61.6 45.4 5 81 5.2 P4KE56A 56 ± 5% 53.2...58.8 47.8 5 77 5.4 P4KE62 62 ± 10% 55.8...68.8 50.2 5 89 4.7 P4KE62A 62 ± 5% 58.9...65.1 53.0 5 85 5.0 P4KE68 68 ± 10% 61.2...74.8 55.1 5 98 4.2 P4KE68A 68 ± 5% 64.6...71.4 58.1 5 92 4.5 P4KE75 75 ± 10% 67.5...82.5 60.7 5 108 3.8 P4KE75A 75 ± 5% 71.3...78.8 64.1 5 103 4.0 P4KE82 82 ± 10% 73.8...90.2 66.4 5 118 3.5 P4KE82A 82 ± 5% 77.9...86.1 70.1 5 113 3.7 P4KE91 91 ± 10% 81.9...100 73.7 5 131 3.2 P4KE91A 91 ± 5% 86.5...95.5 77.8 5 125 3.3 P4KE100 100 ± 10% 90.0...110 81.0 5 144 2.9 P4KE100A 100 ± 5% 95.0...105 85.5 5 137 3.0 P4KE110 110 ± 10% 99.0...121 89.2 5 158 2.6 P4KE110A 110 ± 5% 105...116 94.0 5 152 2.7 P4KE120 120 ± 10% 108...132 97.2 5 173 2.4 P4KE120A 120 ± 5% 114...126 102 5 165 2.5 P4KE130 130 ± 10% 117...143 105 5 187 2.2 P4KE130A 130 ± 5% 124...137 111 5 179 2.3 P4KE150 150 ± 10% 135...165 121 5 215 1.9 P4KE150A 150 ± 5% 143...158 128 5 207 2.0 P4KE160 160 ± 10% 144...176 130 5 230 1.8 P4KE160A 160 ± 5% 152...168 136 5 219 1.9 P4KE170 170 ± 10% 153...187 138 5 244 1.7 P4KE170A 170 ± 5% 162...179 145 5 234 1.8 P4KE180 180 ± 10% 162...198 146 5 258 1.6 P4KE180A 180 ± 5% 171...189 154 5 246 1.7 P4KE200 200 ± 10% 180...220 162 5 287 1.4 P4KE200A 200 ± 5% 190...210 171 5 274 1.5 P4KE220 220 ± 10% 198...242 175 5 344 1.2 P4KE220A 220 ± 5% 209...231 185 5 328 1.3 P4KE250 250 ± 10% 225...275 202 5 360 1.1 P4KE250A 250 ± 5% 237...263 214 5 344 1.2 P4KE300 300 ± 10% 270...330 243 5 430 0.97 P4KE300A 300 ± 5% 285...315 256 5 414 1.0 350 ± 10%0 315...385 284 5 504 0.83 P4KE350A 350 ± 5% 332...368 300 5 482 0.87 P4KE400 400 ± 10% 360...440 324 5 574 0.73 P4KE400A 400 ± 5% 380...420 342 5 548 0.76 P4KE440 440 ± 10% 396...484 356 5 631 0.66 P4KE440A 440 ± 5% 418...462 376 5 602 0.69 P4KE350 © Diotec Semiconductor AG http://www.diotec.com/ 3 P4KE6.8 ... P4KE440CA 120 [%] tr = 10 µs 100 100 [%] 80 80 60 60 40 40 IPP IPP 20 20 PPP PPP 0 0 0 TA 100 50 150 [°C] IPPM/2 PPPM/2 tP 0 1 2 3 [ms] 4 10/1000µs - pulse waveform 10/1000µs - Impulsform Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 1 1 2 10 [kW] 10 1 PPP 0.1 0.1µs tP 1µs 10µs 100µs 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) The range of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown voltage. e.g.: P4KE51C = bidirectional diode, VBR = 51 V (± 10%), VWM ≥ 41.3 V at ID = 5 μA P4KE9.1A = unidirectional diode, VBR = 9.1 V (± 5%), VWM ≥ 7.7 V at ID = 50 μA Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Abbruchspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet eine Toleranz der Abbruchspannung von ± 5%. 1 4 Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden http://www.diotec.com/ © Diotec Semiconductor AG