1(B,G,J)4B1 PRV : 100 - 600 Volts Io : 1.5 Ampere SILICON BRIDGE RECTIFIERS WOB 0.39 (10.0) 0.31 (7.87) 0.22 (5.59) 0.18 (4.57) FEATURES : High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board Pb / RoHS Free + - AC 1.00 (25.4) MIN. 1.10 (27.9) MIN. * * * * * * * 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA : AC * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Terminals : Plated leads solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 1.29 grams + AC 0.22 (5.59) 0.18 (4.57) 0.22 (5.59) 0.18 (4.57) Dimension in inches and (millimeter) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. RATING SYMBOL 1B4B1 1G4B1 1J4B1 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 100 400 600 V Maximum Average Output Rectified Current, Ta = 50°C IF(AV) Maximum Peak One Cycle Surge Forward Current 1.5 50 (50 Hz) IFSM (Non Repetitive) Maximum Forward Voltage at IF = 1.5 A A A 55 (60 Hz) VF 1.2 V IRRM 0.4 mA Tj -40 to +150 °C TSTG -40 to +150 °C Maximum Repetitive Peak Reverse Current at VRRM = Rated, Tj = 150°C Junction Temperature Storage Temperature Range Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES 1(B,G,J)4B1 FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 55 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 1.5 1.2 0.9 0.6 0.3 60 Hz, Resistive or Inductive load. 0 0 25 50 75 100 125 150 175 CASE TEMPERATURE, ( °C) TJ = 50 °C 45 35 60 Hz 25 50 Hz 15 5 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS 50 INSTANTANEOUS FORWARD CURRENT, AMPERES 30 10 TJ = 25 °C 1 0.5 0.3 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005