BR1001S SILICON BRIDGE RECTIFIERS BR10 PRV : 100 Volts Io : 6.0 Ampere FEATURES : * * * * * * * High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop ldeal for printed circuit board Pb / RoHS Free 0.520 (13.20) 0.480 (12.20) 0.158 (4.00) 0.142 (3.60) 0.290 (7.36) 0.210 (5.33) + AC 0.77 (19.56) 0.73 (18.54) AC 0.052 (1.32) 0.048 (1.22) 0.75 (19.1) Min. 0.30 (7.62) 0.25 (6.35) MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic tecnique * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL - STD 202 , Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 6.1 grams Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 50 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 100 V Maximum RMS Voltage VRMS 70 V Maximum Reverse Voltage Maximum Average Forward Rectified Current Ta=40°C Maximum Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage drob per diode at IF = 9.0 A VR 100 V IF(AV) 6.0 A IFSM 200 A V VF 1.0 Maximum Repetitive Peak Reverse Current IRRM 10 µA Typical Thermal Resistance at Junction to Ambient ( Note 1 ) RθJA 1.8 °C/W TJ -40 to + 150 °C Tstg -40 to + 150 °C Operating Junction Temperature Range Storage Temperature Range Notes : 1 ) Thermal resistance from Junction to ambient with units mounted on a 100cm2 x 1.5 t Al. plate. Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( BR1001S ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 10 8 6 4 2 0 0 25 50 75 100 125 150 160 120 TJ = 25 °C 80 40 0 175 AMBIENT TEMPERATURE, ( °C) 1 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE 10 TJ = 100 °C REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES 100 TJ = 25 °C 10 1.0 Pulse Width = 300 µs 1% Duty Cycle 0.1 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005