RBV3500 - RBV3510 SILICON BRIDGE RECTIFIERS RBV25 PRV : 50 - 1000 Volts Io : 35 Amperes 3.9 ± 0.2 30 ± 0.3 C3 4.9 ± 0.2 FEATURES : ∅ 3.2 ± 0.1 ~ ~ 17.5 ± 0.5 + 11 ± 0.2 20 ± 0.3 High current capability High surge current capability High reliability Low reverse current Low forward voltage drop High case dielectric strength of 2000 VDC Ideal for printed circuit board Very good heat dissipation Pb / RoHS Free 13.5 ± 0.3 * * * * * * * * * 1.0 ± 0.1 MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Terminals : Plated lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 8.17 grams ( Approximaly ) 2.0 ± 0.2 10 7.5 7.5 ±0.2 ±0.2 ±0.2 0.7 ± 0.1 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL RBV 3500 RBV 3501 RBV 3502 RBV 3504 RBV 3506 RBV 3508 RBV 3510 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Tc = 55°C IF(AV) 35 A IFSM 400 A Current Squared Time at t < 8.3 ms. I2t 660 A 2S Maximum Forward Voltage per Diode at IF = 17.5 A VF 1.1 V 10 µA RATING Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Maximum DC Reverse Current Ta = 25 °C IR at Rated DC Blocking Voltage Ta = 100 °C IR(H) 200 µA RθJC 1.5 °C/W TJ 10 °C TSTG - 40 to + 150 °C Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range Notes : 1. Thermal Resistance from junction to case with units mounted on heatsink. Page 1 of 2 Rev. 03 : September 9, 2005 RATING AND CHARACTERISTIC CURVES ( RBV3500 - RBV3510 ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 40 30 20 10 P.C. Board Mounted with SINE WAVE R-Load 0 0 25 50 75 600 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT AMPERES 60 100 125 150 500 TJ = 50 °C 400 300 200 100 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 0 175 1 2 4 6 10 20 40 60 10 CASE TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER DIODE PER DIODE 10 100 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES TJ = 100 °C 10 Pulse Width = 300 µs 1 % Duty Cycle 1.0 1.0 TJ = 25 °C 0.1 TJ = 25 °C 0.0 0.1 0 20 40 60 80 100 12 140 0 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : September 9, 2005