EIC FBR1500W

FBR1500W - FBR1510W
FAST RECOVERY
BRIDGE RECTIFIERS
BR50W
PRV : 50 - 1000 Volts
Io : 15 Amperes
FEATURES :
*
*
*
*
*
*
*
0.732 (18.6)
0.692 (17.5)
High case dielectric strength
High surge current capability
High reliability
Low reverse current
Low forward voltage drop
Fast switching for high efficiency
Ideal for printed circuit board
1.130 (28.7)
1.120 (28.4)
0.470 (11.9)
0.430 (10.9)
0.21 (5.3)
0.20 (5.1)
* Pb / RoHS Free
MECHANICAL DATA :
* Case : Molded plastic with heatsink integrally
mounted in the bridge encapsulation
* Epoxy : UL94V-O rate flame retardant
* Terminals : Plated lead solderable per
MIL-STD-202, Method 208 guaranteed
* Polarity : Polarity symbols marked on case
* Mounting position : Bolt down on heat-sink
with silicone thermal compound between
bridge and mounting surface for maximum
heat transfer efficiency
* Weight : 15.95 grams
0.042 (1.06)
0.038 (0.96)
1.2 (30.5)
MIN.
0.310 (7.87)
0.280(7.11)
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
FBR
FBR
1508W 1510W
SYMBOL
FBR
1500W
FBR
1501W
FBR
1502W
FBR
1504W
FBR
1506W
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
Maximum RMS Voltage
VRMS
35
70
140
280
420
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
Maximum Average Forward Current Tc = 55 °C
Peak Forward Surge Current Single half sine wave
IF(AV)
15
A
IFSM
300
A
2
375
1.3
AS
V
IR
10
µA
IR(H)
200
µA
ns
RATING
Superimposed on rated load (JEDEC Method)
Current Squared Time at t < 8.3 ms.
Maximum Forward Voltage drop per Diode at IF = 7.5 A
Maximum DC Reverse Current
Ta = 25 °C
at Rated DC Blocking Voltage
Ta = 100 °C
Maximum Reverse Recovery Time (Note 1)
It
VF
Trr
150
UNIT
1000
V
560
700
V
800
1000
V
2
250
500
°C/W
Operating Junction Temperature Range
RθJC
TJ
1.9
- 50 to + 150
°C
Storage Temperature Range
TSTG
- 50 to + 150
°C
Typical Thermal Resistance per diode (Note 2)
Notes :
1 ) Measured with IF = 0.5 Amp., IR = 1 Amp., Irr = 0.25 Amp.
2 ) Thermal Resistance from junction to case with units mounted on a 3.2" x 3.2" x 0.12" THK (8.2cm.x 8.2cm.x 0.3cm.) Al. Plate. heatsink.
Page 1 of 2
Rev. 02 : March 24, 2005
RATING AND CHARACTERISTIC CURVES ( FBR1500W - FBR1510W )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
Trr
10 Ω
+ 0.5
+
D.U.T.
0
PULSE
GENERATOR
( NOTE 2 )
50 Vdc
(approx)
1Ω
- 0.25
OSCILLOSCOPE
( NOTE 1 )
- 1.0 A
SET TIME BASE FOR 50/100 ns/cm
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
1
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
300
15
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FIG.2 - DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
12
9
6
3
Tc = 55 °C
240
180
120
60
60Hz RESISTIVE OR INDUCTIVE LOAD
0
0
25
50
75
100
125
150
0
175
1
CASE TEMPERATURE, ( °C)
2
FIG.4 - TYPICAL FORWARD CHARACTERISTICS
6
10
20
40
60
100
FIG.5 - TYPICAL REVERSE CHARACTERISTICS
PER DIODE
REVERSE CURRENT, MICROAMPERES
PER DIODE
100
FORWARD CURRENT, AMPERES
4
NUMBER OF CYCLES AT 60Hz
Pulse W idth = 300 µs
2% Duty Cycle
TJ = 25 °C
10
1.0
0.1
10
TJ = 100 °C
1.0
0.1
TJ = 25 °C
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED REVERSE
VOLTAGE, (%)
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
FORWARD VOLTAGE, VOLTS
Page 2 of 2
Rev. 02 : March 24, 2005