DTA143EE/DTA143EUA/ DTA143ECA/DTA143EKA/DTA143ESA DIGITAL TRANSISTOR (PNP) FEATURES 1. Built-in bias resistors enable the c onfiguration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2. The bias resistors cons ist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3. Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTA143EUA DTC114EUA DTA143EE SOT-323 SOT-523 Addreviated symbol: 13 Addreviated symbol: 13 DTA143EKA SOT-23-3L DTA143ECA SOT-23 Addreviated symbol: 13 Addreviated symbol: 13 DTA143ESA TO-92S １ JinYu semiconductor www.htsemi.com Ｄａｔｅ：２０１１／０５ DTA143EE/DTA143EUA/ DTA143ECA/DTA143EKA/DTA143ESA Absolute maximum ratings(Ta=25℃) Limits (DTA143E□ ) Parameter Symbol Supply voltage VCC -50 V Input voltage VIN -30~10 V IO -100 IC(MAX) -100 Output current E UA KA 150 CA SA Unit mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) Max. -0.5 -3 VI(on) Unit V Conditions VCC=-5V ,IO=-100µA VO=-0.3V ,IO=-20 mA Output voltage VO(on) -0.3 V IO/II=-10mA/-0.5mA Input current II -1.8 mA VI=-5V Output current IO(off) -0.5 µA VCC=-50V ,VI=0 DC current gain GI 30 Input resistance R1 3.29 4.7 6.11 Resistance ratio R2/R1 0.8 1 1.2 Transition frequency fT VO=-5V ,IO=-10mA 250 KΩ MHz VO=-10V ,IO=5mA,f=100MHz Typical Characteristics ２ JinYu semiconductor www.htsemi.com Ｄａｔｅ：２０１１／０５