DTA123JE/DTA123JUA/DTA123JKA/DTA123JCA/DTA123JSA TRANSISTOR(PNP) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTA123JE SOT-523 DTA123JUA Addreviated symbol: E32 SOT-323 Addreviated symbol: 132 DTA114ECA DTA123JCA DTA123JKA SOT-23 SOT-23-3L Addreviated symbol: E32 SOT-23 Addreviated symbol: E32 DTA123JSA TO-92S 1 JinYu semiconductor www.htsemi.com Date:2011/05 DTA123JE/DTA123JUA/DTA123JKA/DTA123JCA/DTA123JSA Absolute maximum ratings(Ta=25℃) Parameter Limits (DTA123J□ Symbol E UA KA ) CA SA Unit Supply voltage VCC -50 V Input voltage VIN -12~+5 V IO -100 IC(MAX) -100 Output current 150 mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. -0.5 -1.1 V Conditions VCC=-5V, IO=-100µA VO=-0.3V, IO=-5mA -0.3 V IO/II=-5mA/-0.25mA II -3.6 mA VI=-5V Output current IO(off) -0.5 µA VCC=-50V, VI=0 DC current gain GI 80 Input resistance R1 1.54 2.2 2.86 Resistance ratio R2/R1 17 21 26 Transition frequency fT Output voltage VO(on) Input current -0.1 Unit VO=-5V, IO=-10mA 250 KΩ - MHz VO=-10V, IO=-5mA, f=100MHz Typical Characteristics 2 JinYu semiconductor www.htsemi.com Date:2011/05