10Base-T Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPA1829BG-RC • General Purpose 10Base-T Filter Module • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant • Available in SMD, DIP and DIL Packages Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion * Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -7/-6 -19/-14 -30/-20 -35/-31 -40/-40 -30/-30 -30/-30 Isolation : meets or exceeds 802.3 IEEE Requirements • Characteristic Filter Impedance : 100 Ω • • *Referenced to the Output Level Fundamental Frequency @ 5 MHz • CMC is common to both channels • • Package Schematic Transmit Channel .900 (22.86) .100 (2.54) .085 (2.16) Pin 1 I.D. PCA EPA1829BG-RC Date Code .385 (9.78) .030 (.762) 2 Pad Layout .540 (13.72) 16 1 LPF 15 3 .055 (1.40) 1:1 14 Receive Channel .300 Typ. (7.62) .700 (17.78) .265 (6.73) .010/.015 (.254/.381) LPF .008/.012 (.203/.305) 0°-8° 11 6 10 7 8 1:1 9 .035 (.889) .018/.022 (.457/.559) .500 (12.70) .100 (2.54) Notes : EPA1829BG-RC 1. Lead Finish Hot Tin Dip (Sn) † 2. Peak Temperature Rating 245°C 3. Moisture Sensitive Levels MSL = 4 (72 Hours, ≤30°C/60%RH) 4. Weight 1.85 grams (Tube) 5. Packaging Information (Tape & Reel) 19 pieces/tube 550 pieces/13” reel † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSA1829BG-RC Rev. 3 4/2/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com