10Base-T Interface Module ELECTRONICS INC. EPE6119G & EPE6119G-RC • General Purpose 10Base-T Filter Module • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant • Operating Temperature : 0°C to +70°C • Storage Temperature : -40°C to +125°C • Peak Solder Rating (See Note 2) Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -7/-6 • Attenuation (dB Min.) @ 25 MHz Crosstalk (dB Min.) 1-10 MHz @ 30 MHz 50-100 MHz 1-100 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv -18/-14 -30/-20 -32/-31 -30/-30 Isolation : Meets or exceeds 802.3 IEEE Requirements • -35 Characteristic Filter Impedance : 100 Ω • Package Schematic .995 (25.27) Transmit Channel .090 (2.29) .100 (2.54) .048 (1.22) Pin 1 I.D. Common Mode Rejection (dB Min.) 2 19 LPF PCA EPE6119G(-RC) Date Code .270 (6.86) Pad Layout .440 (11.18) .900 (22.86) 1:1 3 Chip Side .040 (1.02) .010/.015 (.254/.381) .220 (5.59) 17 4 18 Cable Side .008/.012 (.203/.305) 0°-8° Receive Channel 7 LPF .035 (.889) .016/.020 (.406/.508) 12 9 .370 (9.40) .100 (2.54) 14 1:1 8 Chip Side Notes : 1. Lead Finish 13 Cable Side EPE6119G EPE6119G-RC SnPb Hot Tin Dip (Sn) 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 MSL = 3 1.85 grams 1.85 grams 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 245°C 19 pieces/tube 19 pieces/tube 550 pieces/13” reel 550 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6119G & -RC Rev. 3 3/25/09 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com