XMT 5 Vehicle Mount Terminal with Marvell® PXA 320 Processor • 7" WVGA LED and 10.4" SVGA LED available • Fully rugged, IP 67 for the complete system • Advantech-DLoG-specific resistive touchscreen • WLAN with integrated diversity antenna • GPS/GPRS/HSDPA, WLAN, WWAN, CAN (optionally) • Extreme temperature cycles • Extreme shock & vibration Introduction With an extremely rugged housing (IP 67) DLoG XMT 5 is the ideal vehicle mount terminal for harbour and logistic applications. On cranes for container handling as well as on forklifts in warehousing, the XMT 5 is the perfect companion, due to its application required interfaces: WLAN or WWAN, mobile positioning using GPS, CAN bus systems or Ethernet. Specifications System CPU Memory Housing Dimensions/Weight Display XMT 5/7 XMT 5/10 XMT 5/7 XMT 5/10 Touch Screen Software Communication Operating System Emulations WLAN WWAN GPS CAN Bus LAN Serial Interfaces USB Ports Audio Power Supply Environmental DC IP protection class Certifications Operating temperature Relative humidity Shock/Vibration Marvell® PXA320 up to 806 MHz 256 MB SDRAM / 256 MB Flash coated aluminium, fanless design 6.2 x 11.4 x 2.8 in, 2.2 kg / 4.8 lbs 11.2 x 9.1 x 3.2 in, 3.0 kg / 6.6 lbs 7" LED, WVGA 800 x 480, convertible design: portrait and landscape use 10.4" LED, SVGA 800 x 600 DLoG-specific resistive Touch Screen MS® Windows® CE 6.0 VT100, VT220, IBM 5250, TN 3270, Citrix ICA Client ®, RDP Client IEEE 802.11 b/g, optionally GSM-Quadband 850/900/1800/1900, EDGE 2.5G, optionally optionally optionally; ID: CAN 2.0A, CAN 2.0B, J1939 protocol ready RJ45 10/100 Mbps 1 x RS-232 interface, optionally 2 x RS-232 or 1 x RS-232 and 1 x RS-422/485 COM 1 optionally 5 V or 12 V 2 x USB 2.0 Host ; 1 x USB 2.0 Client; 1 x Service USB 2.0 up to 4 GB (SDHC) extended memory speaker integrated 12/24 or 24/48 VDC, galvanically isolated voltage sags up to 5 VDC can be handled for up to 20 sec IP 67 and IP 66 (contains IP 65 and IP 54) CE/FCC Class A -30 to +50 °C / -22 to 122 °F 10 to 90% @ 40 °C, non condensing Class 5M3 according DIN EN 60721-3-5 and MIL-STD 810F (US Highway Truck) Information in this document is subject to change without prior notice. The software and hardware designations used in this text are in most cases also registered trademarks and are thus subject to law. www.advantech-dlog.com