SD4701 RF & MICROWAVE TRANSISTORS CELLULAR BASE STATION APPLICATIONS . .. . . DESIGNED FOR CLASS AB LINEAR OPERATION COMMON EMITTER INTERNAL INPUT/OUTPUT MATCHING 26 VOLT, 960 MHz PERFORMANCE: POUT = 45 W MIN. GAIN = 8.5 dB MIN. COLLECTOR EFFICIENCY 50% MIN. INHERENT RUGGEDNESS: LOAD MISMATCH TOLERANCE OF 5:1 MIN. VSWR 3 dB OVERDRIVE CAPABILITY .400 x .425 6LFL (M169) epoxy sealed ORDER CODE SD4701 BRANDING SD4701 PIN CONNECTION DESCRIPTION 1. Collector 2. Base 3. Emitter ABSOLUTE MAXIMUM RATINGS (T case = 25 ° C) Symbol Parameter Value Unit VCBO Collector-Base Voltage 60 V VCEO Collector-Emitter Voltage 30 V VCER Collector-Emitter Voltage 40 V VEBO Emitter-Base Voltage 3.5 V Device Current 10 A Power Dissipation 145 W TJ Junction Temperature +200 °C T STG Storage Temperature − 65 to +150 °C 1.2 °C/W IC PDISS THERMAL DATA RTH(j-c) May 1993 Junction-Case Thermal Resistance 1/6 SD4701 ELECTRICAL SPECIFICATIONS (T case = 25 ° C) STATIC Symbol Test Conditions Value Min. Typ. Max. Unit BVCBO IC = 60 mA IE = 0 mA 60 — — V BVCEO IC = 60 mA IB = 0 mA 30 — — V BVCER IC = 60 mA RBE = 75 Ω 40 — — V BVEBO IE = 10 mA IC = 0 mA 3.5 — — V ICER VCE = 26 V RBE = 75 Ω — — 15 mA hFE VCE = 10 V IC = 1 A 15 — 100 — DYNAMIC Symbol Test Conditions Value Min. Typ. Max. f = 1 MHz VCB = 26 V For Information Only - This Device is Collector Matched f = 960 MHz VCE = 26 V ICQ = 200 mA POUT = 45 W — 55 — pF — 5 6.3 W POUT f = 960 MHz VCE = 26 V ICQ = 200 mA PIN = 6.3 W 45 55 — W GP ηc f = 960 MHz VCE = 26 V ICQ = 200 mA POUT = 45 W 8.5 9.5 — dB f = 960 MHz VCE = 26 V ICQ = 200 mA POUT = 45 W 50 55 — % COB PIN Load f = 960 MHz VCE = 26 V ICQ = 200 mA POUT = 45 W Mismatch VSWR = 5:1 MIN. @ All Phase Angles OVD f = 960 MHz VCE = 26 V ICQ = 200 mA Set POUT = 45 W; Increase PIN 3dB *IMD3 VCE = 26 V ICQ = 200 mA *Note: f1 f2 2/6 Unit = 900.00MHz = 900.01MHz @ 40.5dB m @ 40.5dB m POUT = 46.5 dBm (45.0W) PEP ** dBT, i n dB , ref erenced to tone level No Degradation in Device Performance No Degradation in Device Performance — −32 — dBT** SD4701 TYPICAL PERFORMANCE POWER OUTPUT vs POWER INPUT POWER OUTPUT vs FREQUENCY P IN = 10W 910MHz OUTPUT POWER (WATTS) PIN = 6.3W VCE = 26V ICQ = 200mA VCE = 26V ICQ = 200mA POWER OUTPUT vs SUPPLY VOLTAGE BROADBAND PERFORMANCE ηC PIN = 7W PIN = 6.3W FREQ = 960MHz ICQ = 200mA POWER GAIN (dB) OUTPUT POWER (WATTS) PIN = 10W PG COLLECTOR EFFICIENCY (%) 860MHz RL POUT = 45W VCE = 26V ICQ = 200mA RL (-dB) OUTPUT POWER (WATTS) PIN = 7W 960MHz 3/6 SD4701 IMPEDANCE DATA TYPICAL INPUT IMPEDANCE ZIN TYPICAL COLLECTOR LOAD IMPEDANCE ZCL VCE = 26V POUT = 45W ICQ = 200mA RL < 10dB ZIN 860 MHz 960 MHz 860 MHz Z IN (Ω) 5.20 + j 6.70 ZCL (Ω) 5.20 − j 4.45 870 MHz 5.15 + j 6.20 5.15 − j 4.50 880 MHz 5.05 + j 5.70 5.10 − j 4.55 890 MHz 5.00 + j 5.15 4.90 − j 4.80 900 MHz 4.95 + j 4.80 4.80 − j 5.10 915 MHz 4.95 + j 4.50 4.50 − j 5.20 930 MHz 4.95 + j 4.40 4.00 − j 4.90 945 MHz 4.90 + j 4.25 3.85 − j 4.65 960 MHz 4.80 + j 4.10 3.70 − j 4.35 FREQ. ZCL 860 MHz 960 MHz Normalized to 10 ohms 4/6 SD4701 TEST CIRCUIT C1, C2 C3, C7 C4, C5 C6 C8 C9, C12 C10, C11 : : : : : : : 1.3 pF ATC 100B Chip Capacitor 430 pF ATC 100B Chip Capacitor 0.6 - 4.5 pF Johanson Variable Capacitor 0.7 pF ATC 100B Chip Capacitor 470 pF ATC 100B Chip Capacitor 221 pF ATC 100B Chip Capacitor 47 µF, 50V, Electrolytic Capacitor L1 R1 + Fb R3 R4 P1 : : : : : 5 Turns #22 AWG 0.16” I.D. 1T:1 Air Choke 11 Ω 1⁄8W Resistor + FB VK-200 11 Ω 1⁄8W Resistor 100 Ω 1⁄8W Resistor 1kΩ, 1 Turn Potentiometer Board Material: 1 oz = 2 sides, Thickness 31.25 mils, Er = 2.55 TEST CIRCUIT PHOTOMASTER 5/6 SD4701 PACKAGE MECHANICAL DATA Ref.: Dwg. No.12-0169 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 6/6