STB60NF10 STB60NF10-1 - STP60NF10 N-channel 100V - 0.019Ω - 80A - TO-220 - D2PAK - I2PAK STripFET™ II Power MOSFET General features Type VDSS (@Tjmax) RDS(on) ID STB60NF10 100V <0.023Ω 80A STB60NF10-1 100V <0.023Ω 80A STP60NF10 100V <0.023Ω 80A 3 ■ Exceptional dv/dt capability ■ 100% avalanche tested 3 1 1 D²PAK 2 TO-220 3 12 I²PAK Description This Power MOSFET series realized with STMicroelectronics unique STripFET™ process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency, high-frequency isolated DC-DC converters for Telecom and Computer applications. It is also intended for any applications with low gate drive requirements. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STB60NF10T4 B60NF10 D²PAK Tape & reel STB60NF10-1 B60NF10 I²PAK Tube STP60NF10 P60NF10 TO-220 Tube September 2006 Rev 4 1/15 www.st.com 15 Contents STB60NF10 - STB60NF10 -1 - STP60NF10 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/15 ................................................ 8 STB60NF10 - STB60NF10 -1 - STP60NF10 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VDS Drain-source voltage (VGS = 0) 100 V VGS Gate-source voltage ± 20 V ID(1) Drain current (continuous) at TC = 25°C 80 A ID Drain current (continuous) at TC=100°C 66 A Drain current (pulsed) 320 A Total dissipation at TC = 25°C 300 W 2 W/°C 16 V/ns 485 J -55 to 175 °C Value Unit IDM (2) PTOT Derating factor dv/dt (3) Peak diode recovery voltage slope EAS (4) Tstg Single pulse avalanche energy Storage temperature 1. Current limited by package 2. Pulse width limited by safe operating area 3. ISD ≤80A, di/dt ≤300A/µs, VDD ≤V(BR)DSS, TJ ≤TJMAX 4. Starting TJ = 25 oC, ID = 40A, VDD = 30V Table 2. Symbol Thermal data Parameter RthJC Thermal resistance junction-case max 0.5 °C/W RthJA Thermal resistance junction-ambient max 62.5 °C/W Tl Maximum lead temperature for soldering purpose 300 °C 3/15 Electrical characteristics 2 STB60NF10 - STB60NF10 -1 - STP60NF10 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 250µA, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±20V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 40A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Max. 100 2 Unit V 1 10 µA µA ±100 nA 3 4 V 0.019 0.023 Ω Typ. Max. Unit VDS = Max rating @125°C Dynamic Parameter Test conditions Min. Forward transconductance VDS = 25V, ID = 40A 78 S Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f = 1 MHz, VGS = 0 4270 470 140 pF pF pF 104 20 32 nC nC nC Total gate charge Gate-source charge Gate-drain charge VDD = 50V, ID = 80A VGS =10V 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 4/15 Typ. VDS = Max rating, IDSS Table 4. Min. STB60NF10 - STB60NF10 -1 - STP60NF10 Table 5. Switching times Symbol Parameter td(on) tr td(off) tf Table 6. Symbol Turn-on delay time Rise time Turn-off delay time Fall time Electrical characteristics Test conditions Min. Typ. Max. 17 56 82 23 VDD= 50V, ID= 40A, RG=4.7Ω, VGS=10V Figure 13 on page 8 Unit ns ns ns ns Source drain diode Max Unit Source-drain current 80 A ISDM(1) Source-drain current (pulsed) 320 A VSD(2) Forward on voltage 1.3 V ISD trr Qrr IRRM Parameter Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions Min Typ. ISD = 80A, VGS = 0 ISD = 80A, di/dt = 100A/µs, VDD = 25V, TJ = 150°C 92 340 7.4 ns nC A Figure 15 on page 8 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/15 Electrical characteristics STB60NF10 - STB60NF10 -1 - STP60NF10 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/15 STB60NF10 - STB60NF10 -1 - STP60NF10 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized BVDSS vs temperature 7/15 Test circuit 3 STB60NF10 - STB60NF10 -1 - STP60NF10 Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/15 Figure 18. Switching time waveform STB60NF10 - STB60NF10 -1 - STP60NF10 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 Package mechanical data STB60NF10 - STB60NF10 -1 - STP60NF10 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 10/15 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STB60NF10 - STB60NF10 -1 - STP60NF10 Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MAX. MIN. A 4.40 MIN. TYP 4.60 0.173 TYP. MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 0.181 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 11/15 Package mechanical data STB60NF10 - STB60NF10 -1 - STP60NF10 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0º 0.015 4º 3 V2 0.4 1 12/15 STB60NF10 - STB60NF10 -1 - STP60NF10 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 0.153 0.161 MAX. MIN. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. P0 3.9 4.1 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 1.574 0.933 0.956 * on sales type 13/15 Revision history 6 STB60NF10 - STB60NF10 -1 - STP60NF10 Revision history Table 7. 14/15 Revision history Date Revision Changes 30-May-2005 1 First release 30-Nov-2005 2 Added package D²PAK 28-Jul-2006 3 New template, SOA updated 18-Sep-2006 4 Added I²PAK STB60NF10 - STB60NF10 -1 - STP60NF10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15