STP55NF06L STB55NF06L - STB55NF06L-1 N-channel 60V - 0.014Ω - 55A TO-220/D2PAK/I2PAK STripFET™ II Power MOSFET General features Type VDSS RDS(on) ID STP55NF06L 60V <0.018Ω 55A STB55NF06L 60V <0.018Ω 55A STB55NF06L-1 60V <0.018Ω 55A ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Application oriented characterization 3 3 12 1 D2PAK I2PAK 3 1 2 TO-220 Description This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STP55NF06L P55NF06L TO-220 Tube B55NF06L D 2PAK B55NF06L 2 STB55NF06LT4 STB55NF06L-1 November 2006 I PAK Rev 4 Tape & reel Tube 1/15 www.st.com 15 Contents STB55NF06L - STB55NF06L-1 - STP55NF06L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 ................................................ 8 STB55NF06L - STB55NF06L-1 - STP55NF06L 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage Value Unit 60 V ± 16 V ID Drain current (continuous) at TC = 25°C 55 A ID Drain current (continuous) at TC = 100°C 39 A IDM(1) Drain current (pulsed) 220 A PTOT Total dissipation at TC = 25°C 95 W 0.63 W/°C Derating factor dv/dt(2) Peak diode recovery voltage slope 20 V/ns EAS(3) Single pulse avalanche energy 300 mJ TJ Tstg Operating junction temperature Storage temperature -55 to 175 °C Thermal resistance junction-case max 1.58 °C/W Rthj-a Thermal resistance junction-ambient max 62.5 °C/W Tl Maximum lead temperature for soldering purpose 300 °C 1. Pulse width limited by safe operating area 2. ISD ≤55A, di/dt ≤200A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX. 3. Starting Tj = 25 oC, ID = 27.5A, VDD= 30V. Table 2. Rthj-case Thermal data 3/15 Electrical characteristics 2 STB55NF06L - STB55NF06L-1 - STP55NF06L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 250µA, VGS= 0 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±16V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 5V, ID= 27.5A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Max. 60 1 VGS= 10V, ID= 27.5A Unit V VDS = Max rating @125°C 1 10 µA µA ±100 nA 1.7 V 0.016 0.014 0.020 0.018 Ω Ω Typ. Max. Unit Dynamic Parameter Test conditions Min. Forward transconductance VDS =15V, ID = 27.5A 30 S Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 1700 300 105 pF pF pF Total gate charge Gate-source charge Gate-drain charge VDD=48V, ID = 55A VGS =4.5V 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 4/15 Typ. VDS = Max rating, IDSS Table 4. Min. 27 7 10 37 nC nC nC STB55NF06L - STB55NF06L-1 - STP55NF06L Table 5. Symbol td(on) tr td(off) tf Table 6. Symbol Electrical characteristics Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. VDD=30 V, ID=27.5A, RG=4.7Ω, VGS= 4.5V (see Figure 12) VDD=30V, ID=27.5A, RG=4.7Ω, VGS=4.5V (see Figure 12) Typ. Max. Unit 20 100 ns ns 40 20 ns ns Source drain diode Max Unit Source-drain current 12 A ISDM(1) Source-drain current (pulsed) 48 A VSD(2) Forward on voltage ISD = 55A, VGS=0 1.6 V Reverse recovery time Reverse recovery charge Reverse recovery current di/dt = 100A/µs, VDD = 30V, Tj = 150°C ISD trr Qrr IRRM Parameter Test conditions ISD = 55A, (see Figure 14) Min Typ. 80 200 5 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/15 Electrical characteristics STB55NF06L - STB55NF06L-1 - STP55NF06L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/15 STB55NF06L - STB55NF06L-1 - STP55NF06L Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/15 Test circuit 3 STB55NF06L - STB55NF06L-1 - STP55NF06L Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/15 Figure 17. Switching time waveform STB55NF06L - STB55NF06L-1 - STP55NF06L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 Package mechanical data STB55NF06L - STB55NF06L-1 - STP55NF06L D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MAX. MIN. A MIN. 4.4 TYP 4.6 0.173 TYP. 0.181 MAX. A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8 10 10.4 0.393 4.88 5.28 0.192 0.208 E1 G 0.368 0.315 8.5 0.334 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.4 0º 0.015 4º 3 V2 1 10/15 STB55NF06L - STB55NF06L-1 - STP55NF06L Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/15 Package mechanical data STB55NF06L - STB55NF06L-1 - STP55NF06L TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. 12/15 MAX. MIN. A 4.40 TYP 4.60 0.173 TYP. MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 0.181 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 STB55NF06L - STB55NF06L-1 - STP55NF06L 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 13/15 Revision history 6 STB55NF06L - STB55NF06L-1 - STP55NF06L Revision history Table 7. 14/15 Revision history Date Revision Changes 09-Sep-2004 3 Complete document 27-Nov-2006 4 The document has been reformatted STB55NF06L - STB55NF06L-1 - STP55NF06L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15