RS1AL - RS1ML CREAT BY ART Pb 0.8 AMP. Surface Mount Fast Recovery Rectifiers Sub SMA RoHS COMPLIANCE Features For surface mounted application Glass passivated junction chip Built-in strain relief, ideal for automated placement Plastic material used carries Underwriters Laboratory Classification 94V-0 Fast switching for high efficiency High temperature soldering: 260℃ / 10 seconds at terminals Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: Molded plastic Terminals: Solder plated RXL Polarity: Indicated by cathode band G = Green Compound Packing: 8mm / 12mm tape per EIA STD RS-481 Y = Year M = Work Month Weight: 0.0196 grams = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% RS1 BL 100 RS1 DL 200 RS1 GL 400 RS1 JL 600 RS1 KL 800 RS1 ML 1000 Maximum Repetitive Peak Reverse Voltage VRRM RS1 AL 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @ TL=90℃ IF(AV) 0.8 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 30 A VF 1.3 V Type Number Symbol Maximum Instantaneous Forward Voltage (Note 1) @ 0.8A Maximum Reverse Current @ Rated VR T A=25 ℃ T A=125 ℃ Unit V 5 IR uA 50 Maximum Reverse Recovery Time (Note 2) Trr Typical Junction Capacitance (Note 3) Cj 10 RθjA RθjL 105 32 TJ - 55 to + 150 O C - 55 to + 150 O C Typical Thermal Resistance Operating Temperature Range Storage Temperature Range TSTG 150 250 500 nS pF O Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: I F=0.5A, I R=1.0A, I RR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:G11 C/W RATINGS AND CHARACTERISTIC CURVES (RS1AL THRU RS1ML) FIG. 2 TYPICAL REVERSE CHARACTERISTICS FIG.1 FORWARD CURRENT DERATING CURVE 100 AVERAGE FORWARD A CURRENT (A) RESISTIVE OR INDUCTIVE LOAD 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 175 o LEAD TEMPERATURE ( C) INSTANTANEOUS REVERSE CURRENT (uA) 1 0.9 TA=150℃ 10 1 TA=100℃ 0.1 0.01 TA=25℃ 0.001 0 60 80 100 120 140 30 FIG. 5 TYPICAL FORWARD CHARACTERISRICS 20 10 10 Pulse Width=300us 1% Duty Cycle 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) 40 8.3mS Single Half Sine Wave JEDEC Method 40 TA=25℃ f=1.0MHz Vsig=50mVp-p INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE A CURRENT (A) 50 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA=125℃ 1 TA=25℃ 0.1 0.01 10 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1 1 10 100 REVERSE VOLTAGE (V) Version:G11 1.8