S3A - S3M CREAT BY ART 3.0AMPS Surface Mount Rectifiers SMC/DO-214AB Pb RoHS COMPLIANCE Features For surface mounted application Glass passivated chip junction Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-0 High temperature soldering: 260℃/10 seconds at terminals Qualified as per AEC-Q101 Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: Molded plastic Terminals: Pure tin plated, lead free Polarity: Indicated by cathode band G = Green Compound Packing: 16mm tape per EIA STD RS-481 Y = Year Weight: 0.21 grams M = Work Month S3X = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol S3A S3B S3D S3G S3J S3K S3M Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TL=105℃ IF(AV) 3 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 100 A VF 1.15 V Maximum Instantaneous Forward Voltage (Note 1) @3A Maximum Reverse Current @ Rated VR T A=25 ℃ T A=125 ℃ IR 10 uA 250 Maximum Reverse Recovery Time (Note 2) Trr 1.5 uS Typical Junction Capacitance (Note 3) Cj 60 pF RθjA RθjL 47 13 TJ - 55 to + 150 O C TSTG - 55 to + 150 O C Typical Thermal Resistance Operating Temperature Range Storage Temperature Range O Note 1: Pulse Test with PW=300 usec, 1% Duty Cycle Note 2: Reverse Recovery Test Conditions: I F=0.5A, I R=1.0A, I RR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Version:G11 C/W RATINGS AND CHARACTERISTIC CURVES (S3A THRU S3M) FIG. 2 TYPICAL REVERSE CHARACTERISTICS FIG.1 FORWARD CURRENT DERATING CURVE 100 3 2.5 2 1.5 RESISTIVE OR INDUCTIVE LOAD 1 0.5 0 0 20 40 60 80 100 120 140 160 LEAD TEMPERATURE (oC) INSTANTANEOUS REVERSE CURRENT (uA) AVERAGE FORWARD CURRENT (A) 3.5 10 TA=125℃ 1 TA=25℃ 0.1 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) PEAK FORWARD SURGE URRENT (A) 8.3mS Single Half Sine Wave JEDEC Method 10 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 4 TYPICAL JUNCTION CAPACITANCE CAPACITANCE (pF) 100 10 TA=25℃ f=1.0MHz Vsig=50mVp-p 1 0.01 0.1 1 REVERSE VOLTAGE (V) 10 FIG. 5 TYPICAL FORWARD CHARACTERISRICS 100 INSTANTANEOUS FORWARD CURRENT (A) 1 100 10 1 0.1 TA=25℃ Pulse Width=300us 1% Duty Cycle 0.01 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 FORWARD VOLTAGE (V) 1.4 1.5 Version:G11 1.6