VECTRON TFS225A

tfs225A.doc
version 2.1
VI TELE FILTER
29.09.2000
Filter Specification
TFS 225A
1/4
Measurement Condition
Ambient temperature:
Input power level:
Terminating impedances
23 °C
0 dBm
for input: 440 Ω || -2.6 pF
for output: 440 Ω || -2.6 pF
170 nH
Coupling coil:
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 225 A is the minimum of the pass band attenuation amin. The minimum of the pass
band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at
the 3 dB filter attenuation level relative to the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have
to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the
operating temperature range and due to a production tolerance for the centre frequency fc.
Data
typ. Value
Insertion Loss
(Reference Level)
ae = amin
Center Frequency
fc
Relative Attenuation
arel
225,0 MHz
225,0 MHz
225,0 MHz
225,0 MHz
225,0 MHz
225,0 MHz
±
±
±
±
±
±
80
200
400
600
1,6
3,0
Group Delay GD
Group Delay Ripple
Group Delay Ripple
3,0
225,0
kHz
kHz ... 225,0 MHz
kHz ... 225,0 MHz
kHz ... 225,0 MHz
kHz ... 225,0 MHz
MHz ...225,0 MHz
± 400
± 600
± 1,6
± 3,0
± 25,0
(p-p)
225,0 MHz ± 50 kHz
225,0 MHz ± 85 kHz
kHz
kHz
kHz
MHz
MHz
dB
MHz
1
1
Limit
max 5,5
-
max 2
min 8
min 28
min 38
min 48
min 50
µs
µs
dB
max 1,2
max 2,0
dB
dB
dB
dB
dB
dB
µs
µs
Operating Temperature Range
- 25 °C ... + 80 °C
Storage Temperature Range
- 30 °C ... + 85 °C
Temperature Coefficient of Frequency
Frequency Inversion Temperature
TCf
ca. - 0,036
25
ppm/K²
°C
Generated:
Checked / Approved:
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs225A.doc
version 2.1
VI TELE FILTER
29.09.2000
Filter Specification
TFS 225A
2/4
Construction, pin configuration and 50 Ω - matching network
(All dimensions in mm)
Datecode:
K
L
M
...
S 225 A
M36
1
2
3
4
5
6
7
8
9
10
11
12
Year+week
1998
1999
2000
Input
Input
Ground
Coupling coil
Package Ground
Ground
Output
Output
Ground
Ground
Package Ground
Ground
50 Ohm Test circuit
LB-IN
L1
8
SAW
C1
L3
L2
1
LB-OUT
C2
2
7
L4
4
3,5,6,9,10,11,12
L5
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs225A.doc
version 2.1
VI TELE FILTER
29.09.2000
Filter Specification
TFS 225A
3/4
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Real of empty components at start:
Real of empty components at start including leader:
Trailer
Tape (all dimensions in mm)
W
Po
Do
E
F
:
:
:
:
:
0,6
2
8
1,5
5,5
7,5
Ct
13,5 ± 0,1
:
EMBOSSED CARRIER TAPE
16
± 0,3
4
± 0,1
1,5 + 0,1
1,75 ± 0,1
7,5 ± 0,1
G (min) :
P2
:
P1
:
D1(min) :
Ao
:
Bo
:
3000
min 300 mm
min 500 mm
min 300 mm
Do
Po
P2
E
Ao
F
D1
Ct
W
Bo
± 0,1
± 0,1
G
± 0,1
± 0,1
P1
COVER TAPE
W 2
Reel (all dimensions in mm):
A
:
W1
W2 (max) :
:
N (min)
:
330
16,4 +2
22,4
50
C
C
:
A
13,0 +0,5/-0,2
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs225A.doc
version 2.1
VI TELE FILTER
29.09.2000
Filter Specification
TFS 225A
4/4
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: [email protected]
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.