tfs465.doc version 1.1 14.07.00 ______________________________________________________________________________________________________ VI TELEFILTER Preliminary specification TFS 465 1/5 ______________________________________________________________________________________________________ Measurement condition Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances: input: 336 -0,3 pF output: 341 -0,5 pF Characteristics Remark: Reference level for the relative attenuation arel of the TFS 465 is the minimum of the pass band attenuation amin . The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a e. The nominal frequency fN is fixed on 465,1375 MHz without tolerance. The given values for the relative attenuation arel have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data typ. value Variation/ Limitation ______________________________________________________________________________________________________ Insertion loss ae = amin max. 4,5 dB 3,8 dB (Reference level) ______________________________________________________________________________________________________ Nominal frequency fN 465,1375 MHz ______________________________________________________________________________________________________ Centre frequency fc 465,1 MHz ______________________________________________________________________________________________________ 2 dB – bandwidth * BW 9,0 MHz min. 5,2 MHz ______________________________________________________________________________________________________ Relative attenuation arel fN - 18,8 MHz ... fN – 24 MHz 55,0 dB min. 50,0 dB ______________________________________________________________________________________________________ Temperature coefficient of the frequency Operating temperature range TCf T.B.D0 °C ... + 55 °C Storage temperature range -20 °C ... + 70 °C ______________________________________________________________________________________________________ * Ripple requirements can be relaxed between 462.7375 MHz and 467.5375 MHz Generated : Sabah Checked / approved : ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs465.doc version 1.1 14.07.00 ______________________________________________________________________________________________________ VI TELEFILTER Preliminary specification TFS 465 2/5 ______________________________________________________________________________________________________ Construction and pin configuration (All dimensions in mm) 7 5 S 465 M28 1 3 Date code Pin 1 Pin 2 Pin 3 Pin 3 Pin 4 Date code: Year+week K 1998 L 1999 M 2000 ...... Input Ground Ground Ground Ground Pin 5 Pin 6 Pin 7 Pin 7 Pin 8 Output Ground Ground Ground Ground 50 Ohm Test circuit L1 L2 5 1 Input 50 Ohm C1 SAW C2 Output 50 Ohm 2,3,4,6,7,8 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs465.doc version 1.1 14.07.00 ______________________________________________________________________________________________________ VI TELEFILTER Preliminary specification TFS 465 3/5 ______________________________________________________________________________________________________ Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Damp heat: (cycle) 25 °C to 55°C / 95% r.H. / 10 cycles DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer 3000 min 300 mm min 500 mm min 300 mm Tape (all dimensions in mm) W : EMBOSSED CARRIER TAPE ± 0,3 12 Po : 4 ± 0,1 Do : 1,5 + 0,5 D1 : 1,5 + 0,5 E : 1,75 ± 0,1 F : 7,5 ± 0,1 D o Po P 2 E A F D G (min) : 0,75 CT 2 ± 0,05 : 8 ± 0,1 D1(min) : 1,5 P2 : P1 o B 1 W o G Ao : 5,4 ± 0,1 Bo : 5,4 ± 0,1 CT : 9,5 ± 0,1 P1 COVER TAPE W2 Reel (all dimensions in mm): A : W1 : W2 (max) : 330 12,4 ± 2,0 18,4 N (min) : 50 C : 13 ± 0.2 A C N W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs465.doc version 1.1 14.07.00 ______________________________________________________________________________________________________ VI TELEFILTER Preliminary specification TFS 465 4/5 ______________________________________________________________________________________________________ Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods over 200 °C 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. tfs465.doc version 1.1 14.07.00 ______________________________________________________________________________________________________ VI TELEFILTER Preliminary specification TFS 465 5/5 ______________________________________________________________________________________________________ History Version 1.0 1.1 Reason of Changes Name Date - generate according to customer specification Dr. Wall 01.03.2000 - Title change: from Filter specification to Preliminary specification - add Date code - add CT value (see Packing, page 3) - add the 50 impedanc matching network - add the measured values of terminating impedances (input and output) - change the max.- and typical. values of Insertion loss (max 4,0dB to max. 4,5dB; Typical. 3,0dB to 3,8dB) (customer agreement date: 07.07.00, see e-mail 07.07.00) - Temperature coefficient of frequency change from –32 ppm/K to T.B.D. - change the stop band attenuation typical value: from –70 dB to –55 dB Dr. Sabah 14.07.2000 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.