VECTRON TFS199D

Version 4.0
tfs199d.doc
VI TELEFILTER
Filter specification
15.02.2001
TFS 199 D
1/5
Measurement condition
Ambient temperature:
Input power level:
terminating impedances
20 ... 25
5±2
input:
output:
°C
dBm
740 Ω || -7.9pF single ended
880 Ω || -6.2pF single ended
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 199 D is the minimum of the pass band attenuation amin. The minimum of the pass band
attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the
0,5 dB filter attenuation level relative to the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to
be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the
operating temperature range and due to a production tolerance for the centre frequency fc.
Data
typ. value
Insertion loss
fN
Relative attenuation
fN - 100
kHz ... fN +
arel
80
30
± 600
+ 800
+ 17
max.
ae = amin
Nominal frequency
fN
fN
fN
fN
fN
limit
100
MHz ... fN 30
MHz ... fN - 800
kHz ... fN ± 800
kHz ... fN +
17
kHz ... fN +
80
-
199,0 MHz
kHz
max.
MHz
kHz
kHz
MHz
MHz
min.
min.
min.
min.
min.
Group delay ripple GD
fC - 100 kHz ... fC + 100 kHz
-
Input power level
short test
standard operation
Permissible DC voltage
7,0 dB
-
0,5 dB
30
25
20
25
35
dB
dB
dB
dB
dB
max. 500
ns
max. + 18
max. + 10
dBm
dBm
max.
V
10
-35 °C ... + 85 °C
-35 °C ... + 85 °C
Operating temperature range
Storage temperature range
Temperature coefficient
TC
- 0,036 ppm/K²
Frequency inversion temperature
To
23 °C
Generated:
Checked / approved:
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
0075
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 4.0
tfs199d.doc
VI TELEFILTER
Filter specification
15.02.2001
TFS 199 D
2/5
Construction and pin connection
(All dimensions in mm)
6
TFS199D
M30
6,50 +/-0,20
13,31 +/-0,20
10
1
2
3
4
5
6
7
8
9
Datecode
1,80+/-0.2
5
1
Datecode:
K
L
M
Year+week
1998
1999
2000
...
1,9+/-0.2
1,02+/-0.2
10
Input RF Return
Ground
Ground
Ground
Output
Output RF Return
Ground
Ground
Ground
Input
1,91+/-0.2
7,62+/-0.2
50 Ω test circuit
L1
L3
10
Input
50 Ohm
5
Output
SAW
L4
L2
50 Ohm
6
1
2,3,4,7,8,9
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
0075
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 4.0
tfs199d.doc
VI TELEFILTER
15.02.2001
Filter specification
TFS 199 D
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Real of empty components at start:
Real of empty components at start including leader:
Trailer
Tape (all dimensions in mm)
W
Po
Do
E
:
:
:
:
24
± 0,3
4
± 0,1
1,5 + 0,1
1,75 ± 0,1
F
:
G (min) :
11,5 ± 0,1
0,60
P2
:
P1
:
D1(min) :
Ao
:
2
12
1,5
7,1
± 0,1
± 0,1
13,9
21,5
± 0,2
± 0,1
Bo
Ct
:
:
2000
min 300 mm
min 500 mm
min 300 mm
EMBOSSED CARRIER TAPE
Do
Po
P2
E
Ao
F
D1
Ct
W
Bo
G
± 0,2
P1
COVER TAPE
W 2
Reel (all dimensions in mm):
A
:
W1
W2 (max) :
:
N (min)
:
330
24,40 +2,0
30,4
60
C
C
:
13
A
± 0,5/-0.2
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
0075
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 4.0
tfs199d.doc
VI TELEFILTER
15.02.2001
Filter specification
TFS 199 D
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
0075
E-Mail: [email protected]
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 4.0
tfs199d.doc
VI TELEFILTER
Filter specification
15.02.2001
TFS 199 D
5/5
History
Version
Reason of Changes
Name
Date
1.0
2.0
Steiner
Steiner
05.11.1999
16.06.2000
3.0
-generation of specification
- change to single ended pinning
- new impedances according to single ended design
- change attenuation from 30 dB to 25 dB at
fN- 30MHz...fN-800kHz
fN+800kHz...fN+17MHz
- change the filter name to TFS199D
Steiner
04.07.2000
3.1
- correct the package dimensions
Steiner
28.07.2000
4.0
- change the insertion loss limit from max. 8dB to max. 7dB as agreed
with the customer
Steiner
15.02.2001
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
0075
E-Mail: [email protected]
Vectron International, Inc.
267 Lowell Road
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.