Version 2.0 tfs211c.doc VI TELEFILTER 25.01.2001 Filter specification TFS 211 C 1/5 Measurement condition Ambient temperature: Input power level: terminating impedances balanced input: balanced output: 20 ... 25 5±2 °C dBm 1,1 kΩ || -5.1pF 1,1 kΩ || -5.2pF Characteristics Remark: Reference level for the relative attenuation arel of the TFS211C is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 1 dB filter attenuation level relative to the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data typ. value Insertion loss ae = amin 6 ... 7 dB Nominal frequency fN - Centre frequency fc 211 arel Relative attenuation fN - 200 kHz ... fN + 200 fN fN fN fN 1 ± 600 ± 1,2 + 1,8 + 7,0 1,0 2,0 3,0 MHz kHz MHz MHz MHz GHz GHz GHz ... fN ... fN ± ... fN ± ... fN + ... ... ... ... 1,8 1,2 1,8 7,0 1,0 2,0 3,0 4,0 kHz min. max. 35 30 - 4,5 8 211 dB dB MHz MHz 0,5 dB MHz MHz MHz MHz GHz GHz GHz GHz Group delay ripple GD fN - 200 kHz ... fN + 200 kHz limit max. 1 dB min. min. min. min. min. min. 30 10 20 30 45 40 dB dB dB dB dB dB max. 350 ns dB dB max. Input power level - max. + 10 dBm Permissible DC voltage - max. V 10 - 35 °C ... + 85 °C - 35 °C ... + 85 °C Operating temperature range Storage temperature range Temperature coefficient TC - 0,036 ppm/K² Frequency inversion temperature To 25 2) 1) °C - Note 1) - ∆f (Hz) = TC (ppm/K²) x (T - To)² x FTo (MHz) Note 2) If the filter is used between -10°C and -35°C all given frequencies may be changed down to max. - 30 kHz Generated: Checked / approved: VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 2.0 tfs211c.doc VI TELEFILTER 25.01.2001 Filter specification TFS 211 C 2/5 Construction and pin connection (All dimensions in mm) 8 9 7 5 TFS 211 C tft M04 10 1 1 2 3 4 5 6 7 8 9 10 6 2 4 3 Ground Ground Ground Balanced output Balanced output Ground Ground Ground Balanced input Balanced input 50 Ω test circuit 1:1 Input 50 Ohm L1 9 SAW L3 L2 L4 4 10 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] 1:1 Output 50 Ohm L6 L5 5 Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 2.0 tfs211c.doc VI TELEFILTER 25.01.2001 Filter specification TFS 211 C 3/5 Stability characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Damp heat: (cycle) 25 °C to 55°C / 95% r.H. / 10 cycles DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do E : : : : F : G (min) : P2 : P1 : D1(min) : Ao : EMBOSSED CARRIER TAPE 16 ± 0,3 4 ± 0,1 1,5 + 0,1 1,75 ± 0,1 Do Po P2 E Ao 7,5 ± 0,1 0,60 2 ± 0,1 ± 0,1 8 1,5 5,30 3000 min 300 mm min 500 mm min 300 mm F D1 W Bo CT G ± 0,2 Bo : 9,70 ± 0,2 CT : 13,5 ± 0,1 P1 COVER TAPE W 2 Reel (all dimensions in mm): A : W1 W2 (max) : : N (min) : 330 16,40 +2,0 22,4 50 C C : 13,0 A ± 0,5/-0.2 N W 1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 2.0 tfs211c.doc VI TELEFILTER 25.01.2001 Filter specification TFS 211 C 4/5 Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods over 200 °C 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 2.0 tfs211c.doc VI TELEFILTER Filter specification 25.01.2001 TFS 211 C 5/5 History Version Reason of Changes Name Date 2.0 generate detailled specification - add terminating impedances - add matching circuit - add tape and reel dimensions, stability characteristics and reflow profile Steiner 24.01.2001 VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International, Inc. 267 Lowell Road Hudson, NH 03051 / USA Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.