FJA13009 High Speed Switching • Suitable for Switching Regulator and Motor Control • High Voltage Switch Mode Applications TO-3P 1 1.Base 2.Collector 3.Emitter Absolute Maximum Ratings* Symbol VCBO T a = 25°C unless otherwise noted Parameter Collector-Base Voltage Ratings 700 Units V 400 V V CEO Collector-Emitter Voltage VEBO Emitter-Base Voltage 9 V IC Collector Current (DC) 12 A 24 A ICP Collector Current (Pulse) IB Base Current PC Collector Dissipation (TC=25°C) 6 A 130 W TJ Junction Temperature 150 °C TSTG Storage Temperature - 65 ~ 150 °C * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics* Ta=25°C unless otherwise noted Symbol V CEO(sus) Parameter Collector-Emitter Sustaining Voltage Test Condition IC = 10mA, IB = 0 Min. 400 Typ. IEBO Emitter Cut-off Current VEB = 7V, IC = 0 hFE DC Current Gain VCE = 5V, IC = 5A VCE = 5V, IC = 8A VCE(sat) Collector-Emitter Saturation Voltage IC = 5A, IB = 1A IC = 8A, IB = 1.6A IC = 12A, IB = 3A 1 1.5 3 V V V VBE(sat) Base-Emitter Saturation Voltage IC = 5A, IB = 1A IC = 8A, IB = 1.6A 1.2 1.6 V V Cob Output Capacitance VCB = 10V , f = 0.1MHz fT Current Gain Bandwidth Product VCE = 10V, IC = 0.5A tON Turn On Time tSTG Storage Time tF Fall Time VCC =125V, IC = 8A IB1 = - IB2 = 1.6A RL = 15,6W 8 6 Max. Units V 1 mA 40 30 180 pF 4 MHz 1.1 ms 3 ms 0.7 ms * Pulse Test: Pulse Width£300ms, Duty Cycle£2% © 2007 Fairchild Semiconductor Corporation FJA13009 Rev. 1.0.0 www.fairchildsemi.com 1 FJA13009 — High Speed Switching October 2008 VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 100 hFE, DC CURRENT GAIN V CE = 5V 10 1 0.1 1 10 10 IC = 3 IB 1 VBE(sat) 0.1 0.01 0.1 100 IC[A], COLLECTOR CURRENT VCE(sat) 1 10 100 IC[A], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 10000 1000 tR, tD [ns], TURN ON TIME Cob[pF], CAPACITANCE VCC=125V IC=5IB 100 10 1 0.1 1 10 100 1000 tR tD, VBE (off)=5V 100 10 0.1 1000 VCB[V], COLLECTOR-BASE VOLTAGE Figure 3. Collector Output Capacitance 10 100 Figure 4. Turn On Time 100 10000 IC[A], COLLECTOR CURRENT s DC s 1m 1000 10 s tSTG m 10 VCC=125V IC=5IB 0m 10 tSTG, tF [ns], TURN OFF TIME 1 IC[A], COLLECTOR CURRENT 1 0.1 tF 100 0.1 0.01 1 10 100 Figure 5. Turn Off Time 10 100 1000 Figure 6. Forward Bias Safe Operating Area © 2007 Fairchild Semiconductor Corporation FJA13009 Rev. 1.0.0 1 VCE[V], COLLECTOR-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT www.fairchildsemi.com 2 FJA13009 — High Speed Switching Typical Characteristics 140 Vcc=50V, IB1=1A, I B2 = -1A L = 1mH 120 PC[W], POWER DISSIPATION IC[A], COLLECTOR CURRENT 100 10 1 0.1 0.01 10 80 60 40 20 0 100 1000 10000 VCE[V], COLLECTOR-EMITTER VOLTAGE 0 25 50 75 100 125 150 175 o Tc[ C], CASE TEMPERATURE Figure 7. Reverse Bias Safe Operating Area Figure 8. Power Derating © 2007 Fairchild Semiconductor Corporation FJA13009 Rev. 1.0.0 100 www.fairchildsemi.com 3 FJA13009 — High Speed Switching Typical Characteristics FJA13009 — High Speed Switching Package Dimension (TO-3P) 5.00 4.60 15.80 15.40 1.65 1.45 5.20 4.80 (R0.50) 20.10 19.70 18.90 18.50 3.70 3.30 (1.85) 2.20 1.80 2.60 2.20 20.30 19.70 3.20 2.80 0.55 1.20 0.80 1 3 5.45 0.75 0.55 5.45 (R0.50) NOTES: A) THIS PACKAGE CONFORMS TO EIAJ SC-65 PACKAGING STANDARD. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONING AND TOLERANCING PER ASME14.5 1973. D) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS. E) DRAWING FILE NAME: TO3P03AREV2. © 2007 Fairchild Semiconductor Corporation FJA13009 Rev. 1.0.0 www.fairchildsemi.com 4 The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM ® PDP-SPM™ Power220® SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I31 © 2008 Fairchild Semiconductor Corporation FJA13009 Rev. A1 www.fairchildsemi.com 5 FJA13009 High Speed Switching TRADEMARKS