Présente / Presents: DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com PS NHG RELAYS PS R C 14.2 9.3 5.3 US R50044271 E158859 Features Electrostatic capacitance Between open Contacts Between coil & Contacts Between Contact Poles Approx.0.4pF Approx.0.9pF Approx.0.2pF Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Item 3.41 of IEC255-7 Insulation Resistance 1000M Item 7 of IEC255-5 min (at 500VDC) Dielectric Strength Surface mount Type with “L ” shaped Terminals. Conforms to FCC Part 68 1.5kV Surge and Dielectric 1000VAC. Monostable or bistable relays Single and double Coil magnet latching Type available. Application for Telecommunication Equipment,Office Equipment, Security Alarm Systems, Measuring instruments, Medical Monitoring Equipment,Audio Visual Equipment, Flight Simulator,Sensor Control. Ordering Information PS L Characteristics 12 W 1 2 3 4 1 Part number PS 2 Operating function Nil: Single Side Stable L:1 Coil Latching K:2 Coil Latching Operation al life Electrical Mechanical 1000VAC 1min 1000VAC 1min 1000VAC 1min Item 6 of IEC255-5 Item 6 of IEC255-5 Item 6 of IEC255-5 Surge Withstand Voltage Between open Contacts Between coil & Contacts Between Contact Poles 1500V 1500V 2500V FCC68 FCC68 FCC68 Functional:500m/s 2 11ms; Survival:1000 m/s2 6ms IEC68-2-27 Test Ea Shock resistance 3 Coil rated voltage(V) DC:3,4.5,5,6,9,12,24 4 Contact material Nil: AgPd W: AgNi 2C DPDT(B-M) Bifurcated Crossbar AgPd(Stationary Contact: Gold clad ) AgNi(Gold clad 1A,2A/30VDC; 0.5A/125VAC 60W 62.5VA Min. Switching load 0.01mA/10mV 220VDC 250VAC Max. Switching Current:2A 50m Reference Value Temperature Range Mass -40~85 (-40~185 F) 1.5g Safety approval Item 3.31 of IEC255-7 Load CAUTION: DC or peak AC IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 of IEC255-19-1 and minimum sample size 24. Safety approvals Item 3.30 of IEC255-7 Relays previously tested or used above 10mA resistive at 6V maximum recommended for subsequent use in low level applications. IEC68-2-6 Test Fc Qualification inspection: Perform the qualification test as specified in the table Item 3.12 of IEC255-7 2 10 5 (DC AgPd);1 10 5(DC AgNi) 1 10 5 (AC) 108 Terminals strength Solderability 10~55Hz Double amplitude Functional 3mm Survival:5mm 5N 235 2 3 0.5s Vibration resistance Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Between open Contacts Between coil & Contacts Between Contact Poles open circuit are not UL&CUR TU V 1A,2A/30VDC 0.5A/125VAC 1A/30VDC Dimensions 0.5A/125VAC mm/inch 3 4.5 5 6 9 12 24 7.5 11.25 12.5 15.0 22.5 30.0 48.0 64.3 144.6 178 257 579 1028 2880 2.25 3.38 3.75 4.50 6.75 9.00 18.0 3 4.5 5 6 9 12 24 8.7 13.0 14.5 17.4 26.1 34.8 57.6 90 202.5 250 360 810 1440 3840 2.25 3.38 3.75 4.50 6.75 9.00 18.0 3 4.5 5 6 9 12 24 6 9 10 12 18 24 36 1 Coil Latching PSL-003 PSL-004 PSL-005 PSL-006 PSL-009 PSL-012 PSL-024 0.14 0.14 0.14 0.14 0.14 0.14 0.20 Set Coil 45 101 125 180 405 720 1920 2.25 3.38 3.75 4.50 6.75 9.00 18.0 2.25 3.38 3.75 4.50 6.75 9.00 18.0 Index Mark 0.5 0.02 Approx.2 2.02 0.08 Approx.1 2.54 0.1 14.2max. 0.559max. 7.62 0.3 A B Stand-off 11.5 0.453 0.020 Dimensions 1.5 0.059 0.68 0.027 1 0.039 Reset 0.10 0.10 0.10 0.10 0.10 0.10 0.15 1 Approx.2 5 1 1 Coil latching 2 3 4 5 1 2 Coil latching 2 3 4 5 SR Approx.2 S S: Set R: Reset (Bottom View) Reset 0.20 0.20 0.20 0.20 0.20 0.20 0.30 Single Side stable 2 3 4 R Reset(Max) Reset Coil 45 101 125 180 405 720 1920 -2.25 -3.38 -3.75 -4.50 -6.75 -9.00 -18.0 Release /Reset Time ms 6.2 +0.4 0.244 0.016 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Operate Time ms 0.25 0.01 Coil power W Reset(Max) 2 Coil Latching PSK-003 PSK-004 PSK-005 PSK-006 PSK-009 PSK-012 PSK-024 Release voltage VDC(min) (10% of rated voltage) 3 0.118 PS-003 PS-004 PS-005 PS-006 PS-009 PS-012 PS-024 Max. Pick up voltage VDC(max) (75%of rated voltage ) 2 0.079 Rated Coil resistance 10% 9. 56 0.376 Coil voltage VDC 9.3max. 0.366max. Dash numbers 5.3 +0.4 0.209 +0.016 Coil Parameter 10 9 8 7 6 Index mark (De-energized Position) Approx.2 Approx.2 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria. 3.When latching relays are installed in equipment, the latch and reset coil should not be pulsed simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magnetically neutral position . 10 9 8 7 6 Index mark (Reset Position) 10 9 8 7 Index mark (Reset Position) Wiring diagram (Bottom view) 6 0.6 0.024 1.2 0.047 2.54 0.1 Soldering Pad (for Terminal) NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. Temporary glue Pad (for Stand-off A or B) Tolerance 0.1/ 0.004 Mounting (Bottom view) Ningbo Huaguan Relay Corporation LTD.