MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR20H SERIES ■ FEATURES ● NO Low power consumption High efficiency electromagnetic circuit saves power consumption. Nominal power consumption: 200 mW Operate power consumption: 112 mW Strong shock resistance Even with 500 m/s2 shock, FBR20H Series relays never miss an operation. High dielectric strength type available (conforms to FCC68.302) Dielectric strength between coil-contact: AC 1,000 V Surge strength between coil-contact: 1,500 V Easy pattern design Separate location of drive (coil) and output (contact) terminals allows easy PC board pattern design. Formed terminals for temporary mounting The uniquely designed terminals allow FBR20H Series relays to be mounted temporarily on PC boards. UL recognized (File No. E63615) Tube packaging TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D ● ● ● ● ● ● ■ ORDERING INFORMATION [Example] FBR21 N (a) (b) H12 (c) U – P (d) (e) (–02) (f ) (a) Series Name (Contact Style) FBR21: FBR20H Series (single contact) FBR22: FBR20H Series (bifurcated contact) (b) Enclosure Nil: Flux free type N: Plastic sealed type (c) Nominal Voltage (Example) H03: 3 VDC H05: 5 VDC H12: 12 VDC (refer to the COIL DATA CHART) (d) UL Standard No designation: standard U: UL114 recognized (e) Contact Material P: Gold-overlay silver-palladium (f) Special Type Nil: Standard 02: High dielectric strength type Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR21H05-P Stamp: 21H05-P 1 FBR20H SERIES ■ SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) Nominal voltage Contact rating NO 1 A 24 VDC resistive 0.5 A 30 VAC resistive 1.5 to 24 VDC ■ SPECIFICATIONS TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D Item Contact 1 form C (SPDT) Material Gold-overlay silver-palladium Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 24 VDC (resistive load) Maximum Carrying Current 2A Maximum Switching Power 60 VA or 24 W Voltage*1 Maximum Switching Current Minimum Switching (reference) Time Value Insulation Bifurcated contact type Arrangement Maximum Switching Coil Single contact type Load*2 125 V 1A Plastic sealed 1 mA 1 V Flux free 1 mA 5 V Plastic sealed 100 µA 0.1 VDC Flux free 1 mA 1 VDC Capacitance (reference) Approximately 2 pF (between coil and contact) Approximately 1 pF (between open contacts) Nominal Power (at 20°C) Approximately 0.2 W to 0.25 W (24 V coil) Operate Power (at 20°C) Approximately 0.112 W to 0.14 W maximum (24 V coil) Operating Temperature –30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 2 ms Resistance (initial) Minimum 100 MΩ (at 500 VDC) Dielectric between coil and contacts Strength 500 VAC 1 minute (standard) 1,000 VAC 1 minute (high dielectric strength type) between open contacts 500 VAC 1 minute 1.500 V 750 V Surge Strength (high dielectric strength type) 1,500 V (10 × 700 µs) Mechanical 5 × 106 operations minimum Electrical (refer to the REFERENCE DATA) 2 × 105 operations minimum (at contact rating) Vibration Resistance 10 to 55 Hz (double amplitude of 3.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s2 (11±1 ms) 10 µs Life Other Weight 700 µs Approximately 1.7 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR20H SERIES ■ COIL DATA CHART MODEL Nominal Coil current Must Nominal Single contact type Bifurcated contact type resistance (at nominal operate voltage ±10% voltage) voltage Flux free Plastic sealed Flux free Plastic sealed approx. NO FBR21H01-P FBR21NH01-P FBR22H01-P FBR22NH01-P 1.5 VDC 11 Ω 136 mA FBR21H03-P FBR21NH03-P FBR22H03-P FBR22NH03-P 3 VDC 45 Ω 67 mA FBR21H05-P FBR21NH05-P FBR22H05-P FBR22NH05-P 5 VDC 125 Ω 40 mA FBR21H06-P FBR21NH06-P FBR22H06-P FBR22NH06-P 6 VDC 180 Ω 33 mA FBR21H09-P FBR21NH09-P FBR22H09-P FBR22NH09-P 9 VDC 405 Ω 22 mA FBR21H12-P FBR21NH12-P FBR22H12-P FBR22NH12-P 12 VDC 720 Ω 17 mA FBR21H18-P FBR21NH18-P FBR22H18-P FBR22NH18-P 18 VDC 1,620 Ω 11 mA FBR21H24-P FBR21NH24-P FBR22H24-P FBR22NH24-P 24 VDC 2,300 Ω 10 mA Must release voltage Maximum allowable voltage Coil Nominal temperature power rise TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D 75% max. 10% min. of nominal of nominal voltage voltage 200% of Approx. Approx. nominal 200 mW 35 deg voltage (at nominal (at nominal voltage) voltage) 180% 250 mW 40 deg Note: All values in the table are measured at 20°C. ■ CHARACTERISTIC DATA Maximum switching capacity age volt coil 140 130 120 110 100 90 Operating voltage range 80 70 rate pe ust o ge volta M 2.0 ➀AC resistive load ( AC contact rating) ➁DC resistive load ( DC contact rating) ➁ ➀ 1.0 ➀ 0.5 ➁ 0.3 Life curve (x104) 200 100 Service life (ops.) 160 150 Contact load current (A) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115˚C le wab allo um xim Ma Nominal Voltage Multiplying Factor (%) Range of operation temperature and voltage 0.2 50 24 V DC resistive load 30 10 120 V AC resistive load 5 0.1 –10 0 10 20 30 40 50 60 70 80 10 Operating temperature (˚C) 20 30 50 1 120 200 0 Contact load voltage (V) 0.5 1 1.5 2 2.5 Contact load current (A) ■ REFERENCE DATA Distribution of Operate & Release Voltage Distribution of Operate & Release Time Distribution of Contact Resistance 80 100 60 Operate Release Operate Release 50 80 30 20 Distribution (%) Distribution (%) Distribution (%) 60 40 60 40 40 20 20 10 0 0 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) 0 1 2 3 4 5 Time (ms) 6 7 8 0 10 20 30 40 50 60 70 80 Contact Resistance (mΩ) 3 FBR20H SERIES ■ DIMENSIONS ●PC board mounting hole layout (BOTTOM VIEW) ●Dimensions Flux free type 2.54 5.08 9.8+0.2 5.08 NO 9.7+0.3 6–ø0.8 7.4+0.2 4 TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D 2.54 5.08 (1.2 Max.) 5.08 ●Schematics (BOTTOM VIEW) 1 2 4 8 7 5 (1.3 Max.) Plastic sealed type 8.2+0.2 4 9.7+0.3 10.7+0.2 2.54 5.08 (1.7 Max.) 5.08 (1.7 Max.) ●Tube carrier 17.6 Max. 10.8 Max. 520 Max. Flux free type:50 pcs/Tube Plastic sealed type:40 pcs/Tube Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: [email protected] www.fcal.fujitsu.com © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 4