MINIATURE RELAY 1 POLE—1 to 2 A (FOR SIGNAL SWITCHING) FBR20 SERIES ■ FEATURES NO Microminiature size Two FBR20 Series relays can be mounted in the space required for a single FBR210 Series relay. 2 A carrying current Strong shock resistance Even with 500 m/s2 shock, FBR20 Series relays never miss an operation. Easy pattern design Separate location of drive (coil) and output (contact) terminals allows easy PC board pattern design. Formed terminals for temporary mounting The uniquely designed terminals allow FBR20 Series relays to be mounted temporarily on PC boards. Conforms to FCC68.302 (high dielectric strength type) UL recognized (File No. E63615) Tube packaging TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D ● ● ● ● ● ● ● ● ■ ORDERING INFORMATION [Example] FBR21 N (a) (b) D12 (c) U – P (d) (e) (–02) (f ) (a) Series Name (Contact Style) FBR21: FBR20 Series (single contact) FBR22: FBR20 Series (bifurcated contact) (b) Enclosure Nil: Flux free type N: Plastic sealed type (c) Nominal Voltage (Example) D03: 3 VDC D05: 5 VDC D12: 12 VDC (refer to the COIL DATA CHART) (d) UL Standard Nil: Standard U: UL114 recognized (e) Contact Material P: Gold-overlay silver-palladium (f) Special Type Nil: Standard 02: High dielectric strength type (1,000 VAC) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR21D05-P Stamp: 21D05-P 1 FBR20 SERIES ■ SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) Nominal voltage Contact rating 1 A 24 VDC resistive 0.5 A 30 VAC resistive 1.5 to 24 VDC ■ SPECIFICATIONS Item NO Single contact type Bifurcated contact type TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D Contact Arrangement Material 1 form C (SPDT) Gold-overlay silver-palladium Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 120 VAC or 1 A 24 VDC (resistive load) Maximum Carrying Current 2A Maximum Switching Power 60 VA or 24 W Voltage*1 Maximum Switching Maximum Switching Current Minimum Switching (reference) Coil Time Value Insulation Load*2 Other *2 Plastic sealed 1 mA 1V Flux free 1 mA 5V Plastic sealed 0.1V 100µA Flux free 1V, 1mA Approximately 2 pF (between coil and contacts) Approximately 1 pF (between open contacts) Nominal Power (at 20°C) Approximately 0.3 W Operate Power (at 20°C) Approximately 0.192 W maximum Operating Temperature –30°C to +65°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 5 ms Release (at nominal voltage) Maximum 2 ms Resistance (initial) Minimum 100 MΩ (at 500 VDC) Dielectric Strength Between coil and contacts 500 VAC for 1 minute (standard) 1,000 VAC for 1 minute (high dielectric strength type) Between open contacts 500 VAC 1 minute 1,500 V (10 × 700 µs) (between coil and contacts) 1,500 V 750 V Mechanical 5× Electrical (refer to the REFERENCE DATA) 2 × 105 operations minimum (at contact rating) Vibration Resistance 10 to 55 Hz (double amplitude of 3.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s 2 (11±1 ms) Weight *1 1A Capacitance (reference) Surge Strength (high dielectric strength) Life 125 V 106 10µs 700µs operations minimum Approximately 1.7 g If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR20 SERIES ■ COIL DATA CHART MODEL Nominal Coil current Must Nominal Single contact type Bifurcated contact type resistance (at nominal operate voltage ±10% voltage) voltage Flux free Plastic sealed Flux free Plastic sealed approx. NO FBR21D01-P FBR21ND01-P FBR22D01-P FBR22ND01-P 1.5 VDC 7.5 W 200 mA FBR21D03-P FBR21ND03-P FBR22D03-P FBR22ND03-P 3 VDC 30 W 100 mA FBR21D05-P FBR21ND05-P FBR22D05-P FBR22ND05-P 5 VDC 83 W 60 mA Must release voltage FBR21D06-P FBR21ND06-P FBR22D06-P FBR22ND06-P 6 VDC 120 W FBR21D09-P FBR21ND09-P FBR22D09-P FBR22ND09-P 9 VDC 270 W 80% max. 5% min. 50 mA of nominal of nominal voltage voltage 33 mA FBR21D12-P FBR21ND12-P FBR22D12-P FBR22ND12-P 12 VDC 480 W 25 mA FBR21D18-P FBR21ND18-P FBR22D18-P FBR22ND18-P 18 VDC 1,080 W 17 mA FBR21D24-P FBR21ND24-P FBR22D24-P FBR22ND24-P 24 VDC 1,920 W 12.5 mA Maximum allowable voltage Coil Nominal temperature power rise 160% of Approx. Approx. nominal 300 mW 45 deg voltage (at nominal (at nominal voltage) voltage) TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D Note: All values in the table are measured at 20°C. ■ CHARACTERISTIC DATA Range of operation temperature and voltage 170 all ab ow 140 le 130 ag olt il v 120 co Operating voltage range e 110 100 90 80 rate t ope Mus 70 –10 0 ge volta Contact load current (A) um im ax 150 2.0 Life curve (x104) 200 ➀AC resistive load ( AC contact rating) ➁DC resistive load ( DC contact rating) M 160 Nominal voltage multiplying factor (%) Maximum switching capacity ➁ 100 Service life (ops.) (Data) assumes that the maximum allowable temperature of E type insulation coil is 115˚C ➀ 1.0 ➀ 0.5 ➁ 0.3 0.2 50 24 V DC resistive load 30 10 120 V AC resistive load 5 0.1 1 10 20 30 40 50 60 70 20 30 10 50 120 200 0 1 1.5 2 2.5 Contact load current (A) Contact load voltage (V) Operating temperature (˚C) 0.5 ■ REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time Distribution of contact resistance 80 100 60 Operate Release Operate Release 50 80 30 20 Distribution (%) Distribution (%) Distribution (%) 60 40 60 40 40 20 20 10 0 0 0 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) 0 1 2 3 4 5 Time (ms) 6 7 8 0 10 20 30 40 50 60 70 80 Contact resistance (mΩ) 3 FBR20 SERIES ■ DIMENSIONS ●PC board mounting hole layout (BOTTOM VIEW) ●Dimensions Flux free type 9.8+0.2 2.54 5.08 5.08 NO 9.7+0.3 6–ø0.8 7.4+0.2 4 TF DE OR SI N GN EW TO DI S SC BE ON TIN UE D 2.54 5.08 (1.2 Max.) 5.08 ●Schematics (BOTTOM VIEW) 1 2 4 8 7 5 (1.3 Max.) Plastic sealed type 8.2+0.2 4 9.7+0.3 10.7+0.2 2.54 5.08 (1.7 Max.) 5.08 (1.7 Max.) ●Tube carrier 17.6 Max. 10.8 Max. 520 Max. Flux free type:50pcs/Tube Plastic sealed type:40pcs/Tube Fujitsu Components International Headquarter Offices Unit: mm Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: [email protected] www.fcal.fujitsu.com © 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 4