MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES ■ FEATURES ● ● ● ● Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. Slim type for high density mounting Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements UL recognized and CSA certified Low power consumption Conforms to IEC 950 (W type only) – 2.5 mm clearance and creepage between coil and contacts –5000 V surge strength between coil and contacts (2x10µs surge wave) –2000 Vrms dielectric strength between coil and contacts –UL 1950 and IEC950 (approval in process) NO TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D ● ● ■ ORDERING INFORMATION [Example] FBR12 N (a) (b) D (c) 12 (d) –P (e) –** (–CSA) (f ) (g) (a) Series Name FBR12 : FBR12 Series (b) Enclosure & Coil Power N W H : Standard (plastic sealed type) : High dielectric strength type (plastic sealed type) : High sensitivity type (c) Coil Type D : DC coil (d) Nominal Voltage (e) Contact Material Nil –P (f) Custom Designation To be assigned custom specification (g) CSA Standard –CSA –CSA Refer to the COIL DATA CHART : Gold-overlay silver-nickel : Gold-overlay silver-palladium : UL114 + CSA recognized : UL1950 + CSA (under application) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR12ND05 Stamp: 12ND05 ■ SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal coil voltage 3 to 24 VDC Contact rating 0.5 A 125 VDC resistive 2 A 30 VDC resistive 0.3 A 110 VAC resistive 1 FBR12 SERIES ■ SPECIFICATIONS Item Standard (Gold-overlay silver-nickel) Standard Contact High dielectric strength type Arrangement 2 form C (DPDT) Material Gold-overlay silver-nickel Style Bifurcated Resistance (initial) Rating (resistive) -P type (Gold-overlay silver-palladium) Standard High dielectric strength type Gold-overlay silver-palladium NO Maximum 100 mΩ (at 0.1 A 6 VDC) 0.5 A 125 VAC or 1 A 30 VDC TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D Coil Time Value Insulation Maximum Carrying Current 2 A (at 20°C) Maximum Switching Power 62.5 VA or 60 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2A Minimum Switching Load*2 10 µA 10 VDC (reference) Capacitance (at 10 kHz) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Nominal power (at 20°C) Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Operate power (at 20°C) Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Thermal Resistance at Continuous Thermal Load Approximately 115°C/W Operating Temperature –40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Maximum 4 msec. Max. Switching Frequency Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Resistance (initial) Minimum 1000 MΩ (at 500 VDC) 1,500 1,000 VAC 750 1 minimum Dielectric between open contacts Strength adjacent contacts Surge Strength between coil and contacts 1,500 VAC 1 min. between open contacts, adjacent contacts 1,500 V 10 × 700 µs between coil and contacts Life Other 2 5,000 V 2 × 10 µs 2,000 VAC 1 min. 10 2,500 V 2 × 10 µs DC 2 × 105 operations minimum 5,000 V 2 × 10 µs AC 1 × 105 operations minimum 5 × 105 operations minimum 200 × 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3 mm) Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s2 ( 6 ±1 ms) Weight *1 700 1,500 VAC 1 min. 1 × 108 operations minimum Mechanical Electrical (at contact rating) 2,500 V 2 × 10 µs 10 2,000 VAC 1 min. 2,500 1,250 Approx. 1.5 g Approx. 1.9 g Approx. 1.5 g Approx. 1.9 g If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR12 SERIES ■ SPECIFICATIONS Item High Sensitive Type Standard (Gold-overlay silver-nickel) Contact Arrangement -P type (Gold-overlay silver-palladium) 2 form C (DPDT) Material NO Gold-overlay silver-nickel Style Gold-overlay silver-palladium Bifurcated Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D Rating (resistive) Coil Time Value Insulation 0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C) Maximum Switching Power 62.5 VA or 30 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2A Minimum Switching Load*2 10m VDC - 10µ A Capacitance (at 10 kHz) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Nominal power (at 20°C) Approximately 50mW Operate power (at 20°C) Approximately 40m W Operating Temperature –40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 5 msec. Release (at nominal voltage) Maximum 5 msec. Resistance (initial) Minimum 1000 MΩ (at 500 VDC) Dielectric between open contacts Strength adjacent contacts 750 VAC 1 minute Surge Strength between coil and contacts 1,500 VAC 1 minutes between open contacts, adjacent contacts 1,500 V 10 × 700 µs between coil and contacts Life Other 1 x 108 operations minimum Mechanical Electrical (at contact rating) 2,500 V 2 × 10 µs DC 2 × 105 operations minimum AC 1 × 105 operations minimum 5 × 105 operations minimum 200 × 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3` mm) Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s2 ( 6 ±1 ms) Weight Approx. 1.9 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 3 FBR12 SERIES ■ COIL DATA CHART 1.STANDARD MODEL Nominal voltage Nominal Coil current resistance (at nominal (±10%) voltage) approx. Standard -P type FBR12ND03 FBR12ND03-P 3 VDC 64.3 Ω 46 mA FBR12ND04 FBR12ND04-P 4.5 VDC 145 Ω 31 mA NO Must operate1 voltage* Must operate1 voltage* Nominal power Operate power Coil temperature rise TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D FBR12ND05 FBR12ND05-P 5 VDC 178 Ω 28 mA FBR12ND06 FBR12ND06-P 6 VDC 257 Ω 23 mA FBR12ND09 FBR12ND09-P 9 VDC 579 Ω 15 mA FBR12ND12 FBR12ND12-P 12 VDC 1,028 Ω 11 mA FBR12ND24 FBR12ND24-P 24 VDC 2,880 Ω 8 mA 75% max. 10% min. Approx. W of nominal of nominal (at0.14 nominal voltage voltage voltage) Approx. 0.08 W Max. Approx. 20 deg Max. (at nominal voltage) 0.2 W 0.112 W 30 deg Nominal power Operate power Coil temperature rise Approx. 0.13 W Max. Approx. 30 deg (at nominal voltage) 0.25 W 0.14 W 33 deg Nominal power Operate power Coil temperature rise Approx. 0.04 W Max. Approx. 4 deg (at nominal voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 2.HIGH DIELECTRIC STRENGTH MODEL Nominal voltage Nominal Coil current resistance (at nominal voltage) (±10%) approx. Standard -P type FBR12WD03 FBR12WD03-P 3 VDC 39 Ω 77 mA FBR12WD04 FBR12WD04-P 4.5 VDC 88 Ω 51 mA FBR12WD05 FBR12WD05-P 5 VDC 108 Ω 46 mA FBR12WD06 FBR12WD06-P 6 VDC 156 Ω 38 mA FBR12WD09 FBR12WD09-P 9 VDC 352 Ω 25 mA FBR12WD12 FBR12WD12-P 12 VDC 626 Ω 19 mA FBR12WD24 FBR12WD24-P 24 VDC 2,304 Ω 10 mA Must operate1 voltage* Must release 1 voltage* 75% max. 10% min. Approx. W of nominal of nominal (at0.23 nominal voltage voltage voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 3. HIGH SENSITIVITY TYPE MODEL Nominal voltage Coil resistance (±10%) Standard -P type FBR12HD03 FBR12HD03-P 3 VDC 180 Ω FBR12HD04 FBR12HD04-P 4.5 VDC 405 Ω FBR12HD05 FBR12HD05-P 5 VDC 500 Ω FBR12HD06 FBR12HD06-P 6 VDC 720 Ω FBR12HD09 FBR12HD09-P 9 VDC 1,620 Ω FBR12HD12 FBR12HD12-P 12 VDC 2,880 Ω Must operate1 voltage* Must release1 voltage* 80% max. 10% min. Approx. W of nominal of nominal (at0.05 nominal voltage voltage voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 4 FBR12 SERIES ■ CHARACTERISTIC DATA Maximum switching capacity Range of operation temperature and voltage Life curve e ltag l vo coi ble wa allo 150 140 130 120 Operating voltage range 110 100 ➀ AC resistive load ( AC contact rating) ➁ DC resistive load ( DC contact rating) 2.0 Contact load current (A) 160 ➁ 1.0 NO ➀ 0.5 0.3 500 Service life (operations) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115˚C um xim Ma Nominal voltage multiplying factor (%) (×104) 30 V DC resistive load 100 (–P)TYPE 50 125 V AC resistive load 10 5 TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D 90 80 rate t ope Mus 70 ge volta 0.2 0.1 –10 0 10 20 30 40 50 60 70 80 10 20 30 125 50 (–P)TYPE 1 0.5 200 Contact load voltage (V) Operating temperature (˚C) 1.0 1.5 2.0 Contact load current (A) ■ REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time Distribution of contact resistance 100 60 80 Operate Release Operate Release 50 80 30 20 Distribution (%) Distribution (%) Distribution (%) 60 40 60 40 40 20 20 10 0 0 10 20 30 40 50 60 70 80 0 0 1 Rated coil voltage multiplying factor (%) 2 3 4 5 6 7 8 ■ DIMENSIONS ●Dimensions 0 10 20 30 40 50 60 70 ●Schematics (BOTTOM VIEW) ●PC board mounting hole layout (BOTTOM VIEW) 7.2+0.3 1 3 4 5 12 10 9 8 3.2 9.7+0.3 14.6+0.4 80 Contact resistance (mΩ) Time (ms) 5.08 0 (0.95) 0.50 5.08 0.25 (1.06) 5.08 2.54 2.54 8– ø1 .00 ✽SHOW ONE OUT OF THBSB 3 DIMENSIONS (See NA) ●Tube carrier 500±2 15.6 Max. 10.6 Max. Unit: mm 30 pcs/Tube 5 FBR12 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: [email protected] www.fcal.fujitsu.com NO TF OR DE FB N R1 SI E BE 2 S GN W DI E SC RIE ON S TIN TO IE D © 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 07/26/2004. 6