ULTRA MINIATURE 2-POLES 2A (SLIM PROFILE SIGNAL RELAY) FTR-B4 Series RoHS compliant n Features DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum (SMT) Weight: Approximately 1.0 g lConforms to Bellcore & FCC part 68, and Telcordia & FCC part 68 lConforms to UL1950 / CSA 950, IEC 950 / EN60950 spacing and high breakdown voltage Clearance: 1.0mm Creepage: 1.6mm Basic insulation, 150V working voltage, pollution degree 2 l High reliable birfuracted gold overlay silver contact lLow power consumption 140 mW (standard), 100 mW (latching) lRoHS compliant since date code: 0430B8 Please see page 8 for more information l l nORDERING INFORMATION [Example] FTR-B4 C A 4.5 Z - B 05 (a) (b)(c) (d) (e) (f ) (g) (a) Series Name FTR-B4 Series (b) Terminal type C: Through hole G: surface mount S: surface mount type - space saving (c) Operation function A: standard type B: latching type (1 coil) (d) Coil voltage Nominal voltag (e) Contact material Z: gold overlay silver nickel (standard) P: gold overlay silver palladium (f ) Relay enclosing direction* B: standard enclosing direction (g) Number of relays per reel* 05: 500 (standard) Remarks: Actual marking on relay would not carry code FTR and be as below: Ordering code Actual marking Notes: *FTR-B4CA4.5Z → B4CA4.5Z - Only surface mount types (G and S) are applicable - All relays are packaged in tubes unles P/N ends with -B05 FTR-B4 Series nPART NUMBERS Standard type Ordering Part Number Series Terminal Type Operation Coil Voltage FTR-B4CA1.5Z 1.5 FTR-B4CA003Z 3 FTR-B4CA4.5Z 4.5 C: through hole FTR-B4CA006Z FTR-B4CA009Z 6 9 FTR-B4CA012Z 12 FTR-B4CA024Z 24 FTR-B4GA1.5Z 1.5 FTR-B4GA003Z 3 FTR-B4GA4.5Z 4.5 FTR-B4GA006Z FTR-B4GA009Z FTR-B4 G: surface mount A: mono-stable (standard type) 6 9 FTR-B4GA012Z 12 FTR-B4GA024Z 24 FTR-B4SA1.5Z 1.5 FTR-B4SA003Z 3 FTR-B4SA4.5Z FTR-B4SA006Z FTR-B4SA009Z S: space saving surface mount Contact Material Z: Au-Ag-Ni P: Au-Ag-Pd 4.5 6 9 FTR-B4SA012Z 12 FTR-B4SA024Z 24 FTR-B4 Series Latching type (1 coil) Ordering Part Number Series Terminal Type Operation Coil Voltage FTR-B4CB1.5Z 1.5 FTR-B4CB003Z 3 FTR-B4CB4.5Z 4.5 C: through hole FTR-B4CB006Z FTR-B4CB009Z 6 9 FTR-B4CB012Z 12 FTR-B4CB024Z 24 FTR-B4GB1.5Z 1.5 FTR-B4GB003Z 3 FTR-B4GB4.5Z 4.5 FTR-B4GB006Z FTR-B4 FTR-B4GB009Z G: surface mount Contact Material B: latching 6 9 FTR-B4GB012Z Z: Au-Ag-Ni P: Au-Ag-Pd 12 FTR-B4GB024Z 24 FTR-B4SB1.5Z 1.5 FTR-B4SB003Z 3 FTR-B4SB4.5Z 4.5 S: space saving surface mount FTR-B4SB006Z FTR-B4SB009Z 6 9 FTR-B4SB012Z 12 FTR-B4SB024Z 24 n COIL DATA CHART Standard type Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance Must Operate ( ±10%) Voltage*2 Must Release Voltage*2 1.5 1.5 3.53 VDC 16.1 Ω 1.13 VDC 0.15 VDC 003 3 7.05 VDC 64.3 Ω 2.25 VDC 0.3 VDC 4.5 4.5 10.58 VDC 145 Ω 3.38 VDC 0.45 VDC 006 6 14.10 VDC 257 Ω 4.5 VDC 0.6 VDC 009 9 21.15 VDC 579 Ω 6.75 VDC 0.9 VDC 012 12 28.20 VDC 1,028 Ω 9.0 VDC 1.2 VDC 024 24 56.40 VDC 2,504 Ω 18.0 VDC 2.4 VDC Nominal Power (mW) 140 230 *1: No contact current at 20°C. Please see ‘operating range’ data for other conditions. *2: Specified values are subject to pulse wave voltage. FTR-B4 Series Latching type (1 coil) Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 1.5 1.5 3.53 VDC 22.5 Ω 1.13 VDC -0.13 VDC 50mA 003 3 7.05 VDC 90 Ω 2.25 VDC -2.25 VDC 25mA Coil Resistance Must Operate Must Release Set/Re-set ( ±10%) Voltage*2 Voltage*2 current 4.5 4.5 10.58 VDC 203 Ω 3.38 VDC -3.38 VDC 17mA 006 6 14.10 VDC 360 Ω 4.5 VDC -4.5 VDC 13mA 009 9 21.15 VDC 810 Ω 6.75 VDC -6.75 VDC 8mA 012 12 28.20 VDC 1,440 Ω 9.0 VDC -9.0 VDC 6mA 024 24 56.40 VDC 4,800 Ω 18.0 VDC -18.0 VDC 4mA Nominal Power (mW) 100 120 Note: All values in the table are measured at 20˚C. *1: No contact current at 20°C. Please see ‘operating range’ data for other conditions. *2: Specified values are subject to pulse wave voltage. n SPECIFICATIONS Contact Coil Time value Life Standard Type Latching Type FTR-B4 ( ) A FTR-B4 ( ) B Arrangement 2 Form C Contact material Gold overlay silver nickel / Gold overlay silver palladium Contact type Bifurcated contact (cross-bar) Contact resistance (initial value) 100mΩ maximum at 6VDC 1 Contact rating 30 VDC 1A, 125 VAC 0.3 A (resistive) Maximum carrying current 2A Maximum switching power 62.5 VA / 30W Maximum switching voltage 250 VAC/ 220 VDC Minimum switching load* 10m VDC, 0.01mA* Nominal power (at 20°C) 140 mW up to 230 mW 100 mW up to 130 mW Operate power (at 20°C) 80 mW up to 130 mW 57 mW up to 68 mW Operating temperature (no frost) -40°C to +85°C Operate (at nominal voltage, without bounce) 3ms maximum 3ms maximum (set) Release (at nominal voltage, without bounce) 3ms maximum 3ms maximum (reset) 6 Mechanical Electrical (resistive load) 50 x 10 operations 20 x 106 operations DC load 100 x 103 ops. min. at 1A, 30 VDC (at 0.5 Hz) AC load 100 x 103 ops. min. at 0.3A, 125VAC (at 0.5 Hz) Vibration resistance Misoperation 10 to 55 Hz at double amplitude of 3 mm Endurance 10 to 55 Hz at double amplitude of 5 mm Shock resistance Misoperation Min. 750 m/s2 Endurance Min. 1,000 m/s2 Weight Approximately 1.0 g US/CSA Contact rating 0.5A, 125 VAC; 1A, 30 VDC; 0.3A, 110 VDC *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, envionmental conditions and expected reliability levels. FTR-B4 Series characteristic data ● Standard type Operation 80 Temperature(ºC) FTR-B4GA4.5Z n=10 Time(ms) 4 3 2 Operationtime 60 40 1A 20 0A 1 Release 0 0 0.1 0 0.2 0 0.3 0.1 MaximumSwitchingPower ContactCurrent(A) Standardlatch Operation(x104) 0.5 0.4 DCResistive 0.3 0.2 0.1 1 5 10 30 50 FTR-B4GB4.5Z n=10 Distribution(%) Time(ms) 2 20 0 0.2 0.4 0.8 1.0 1A 2.0 1.6 1.4 1.0 0.8 0.6 0 ltage tingvo Opera il) (hotco ltage tingvo Opera il) o c l (coo 20 40 60 80 0.6 0 80 100 AmbientTemperature(oC) 100 AmbientTemperature(oC) Coiltemperaturerise 80 70 set/reset 60 60 40 1A (?) 0A 1.8 1.2 0.8 ltage tingvo Opera il) o c t o (h ltage tingvo Opera oil) (coolc 20 40 60 1.2 80 2 ContactCurrent(A) NominalVoltageMultiplyingFactor(%) 0.6 FTR-B4GB4.5Z n=10 1 5 10 Time(ms) 0.3 AmbientTemperature 2.2 1.0 PulseCharacteristics CoilPower(W) 2.4 1.2 125VDCResistive 10 40 0.5 0.2 1.4 30VDCResistive 50 1 0.1 1.6 30 90 Operationtime Release 0 1.8 Standard 100 (returntimecharacteristics) 3 0 1A 2.0 0A ContactCurrent(A) ● Latching type Operation 4 2.2 40 ContactVoltage(V) 5 Standard 2.4 50 0 100 200 AmbientTemperature LifeCurve 100 ACResistive 1 0.3 CoilPower(W) CoilPower(W) 2 0.2 Temperature(ºC) 5 NominalVoltageMultiplyingFactor(%) Coiltemperaturerise (returntimecharacteristics) 50 100 200 Latch 0 0.1 DCResistive 0.3 0.2 5 10 30 50 ContactVoltage(V) 100 200 0.2 0.3 CoilPower(W) LifeCurve 100 ACResistive 0.5 0.4 1 0 0A MaximumSwitchingPower 1 0.1 20 Operation(x104) n Latch 50 40 30 20 30VDCResistive 125VDCResistive 10 0 0 0.2 0.4 0.6 0.8 1.0 ContactCurrent(A) 1.2 FTR-B4 Series reference data n ● Standard type Distribution of Operate and Release Voltage 60 40 60 40 20 0 10 20 30 40 50 60 70 80 0 Distributionofcontactresistance 80 3 150 Isolation (dB) 70 2 Time (ms) 60 50 40 4 50 20 1.8 0 Contactresistance(mΩ) 70 60 50 40 30 FTR-B4GA4.5Z n=100 Operate Release 1.0 0.8 0.6 10 20 30 40 50 60 70 50 40 30 20 80 40 30 30 50 70 100 Frequency (MHz) 300 500700 1000 DistributionofBounceTime FTR-B4GA4.5Z n=100 Operate Release 80 70 60 50 40 30 20 10 0 1 2 3 Time(ms) 4 0 5 150 0 1 2 3 4 5 Time(ms) HighFrequencyCharacteristics 3.6 FTR-B4GB4.5Z n=2 FTR-B4GB4.5Z n=2 3.2 InsertionLoss(dB) 50 3 5 7 10 100 HighFrequencyCharacteristics 100 Isolation(dB) 60 1 90 60 0 FTR-B4GA4.5Z n=100 Make Break Distribution(%) 5 1.2 0 10 Distributionofcontactresistance 50 2.8 2.4 2.0 1.6 1.2 0.8 0.4 20 0 1 10 0 4 1.4 300 500 700 1000 DistributionofBounceTime NominalVoltageMultiplyingFactor(%) 70 30 50 70 100 Frequency (MHz) 70 10 80 3 5 7 10 80 20 90 1 90 Distribution(%) Distribution(%) 100 FTR-B4GB4.5Z n=100 Operate Release 80 100 3 FTR-B4GA4.5Z n=2 1.6 Distribution(%) 10 20 30 40 50 60 70 80 90 100 DistributionofOperate andReleaseVoltage 0 2 0.2 0 90 0 1 0.4 ● Latching type 100 40 High Frequency Characteristics 10 0 60 Time (ms) FTR-B4GA4.5Z n=2 100 30 80 0 5 High Frequency Characteristics FTR-B4GA4.5Z n=100 Make Break 90 1 Insertion Loss (dB) 100 FTR-B4GA4.5Z N=100 Operate Release 20 20 Nominal Voltage Multiplying Factor (%) Distribution(%) FTR-B4GA4.5Z n=100 Operate Release 80 Distribution (%) 80 Distribution (%) 100 FTR-B4GA4.5Z n=100 Operate Release Distribution of Bounce Time 100 Distribution (%) 100 Distribution of Operate and Release Time 0 10 20 30 40 50 60 70 80 90 100 Contactresistance(mΩ) 0 1 10 100 Frequency(MHz) 1000 10 100 Frequency(MHz) 1000 FTR-B4 Series n DIMENSIONS AND SCHEMATICS Through hole type 5.7±0.3 5.7±0.3 Surface mount type (standard) 10.6±0.3 3.2±0.2 2.2±0.2 2.2±0.2 3.2 8-O 0.85 (-) 8 7 6 5 1 (+) 2 3 4 1.2 7.6 2.2 (-) 8 7 6 5 2 3 4 3.1 3.2 2.2 7.4±0.3 2.2±0.2 2.2±0.2 3.2±0.2 3.2±0.3 5.3 7.6 3.2 0.4±0.1 3.2±0.2 1.5±0.2 0.2±0.05 0.2±0.05 0.4±0.1 3.1 1.5±0.2 9.7±0.3 9±0.3 0.5 9±0.3 3.54±0.3 0.5±0.1 10.6±0.3 Recommended mounting pad (Tolerance: ±0.1mm) Terminal designations (Top view de-energized position) 0.8 Recommended mounting pad (Tolerance: ±0.1mm) 1 (+) Terminal designations (Top view de-energized position) 5.7±0.3 10.6±0.3 FTR-B4 Series 0.2±0.05 5.7±0.3 0.4±0.1 3.2±0.2 1.5±0.2 1.2 0.5 Space saving 9.7±0.3 9±0.3 n DIMENSIONS AND SCHEMATICS 5.7±0.3 2.2±0.2 2.2±0.2 10.6±0.3 3.2 3.2±0.3 7.6 2.2 0.2±0.05 0.4±0.1 3.2±0.2 1.5±0.2 2.2 3.2 ±0.2 6 5 2 3 4 2.25 4.45 1 (+) 0.8 3.2±0.3 Recommended mounting pad (Tolerance: ±0.1mm) 5.7±0.3 2.2±0.2 7 2.25 1.2 0.5 9.7±0.3 9±0.3 (-) 8 Terminal designations (Top view de-energized position) 7.6 2.2 (-) 8 7 6 5 2.25 4.45 2.25 n RECOMMENDED SOLDERING CONDITIONS FOR SMT (TEMPERATURE PROFILE) IRS (Infrared Reflow Soldering) 1 (+) Temperature (C) 0.8 soldering T3 0 preheating 120 sec maximum 3 4 T 3 = 250C max. T 2 = 220C max. cooling T 1 = 130C max. T2 T1 2 Note: 1.Temperature profiles show the tempera ture of PC board surface. 2. Please perform soldering test with your actual PC board before mass produc tion, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mount ing and heating method. 30 sec Max. n PRECAUTIONS - For details on general precautions, refer to the section on technical descriptions. - Since this is a polarized relay, follow the instructions of the internal wiring diagram for the +/- connections of the coil. - Note that the terminal layout and internal wiring of the surface mount relay are a top view. - SMT versions of the FTR-B4 relays have moisture sensitivity level 3, acc. JEDEC-J-STD-020D - SMT versions of the FTR-B4 relays will be shipped in “Dry Pack”. Relays have an “Out of Bag” storage time of 192h. FTR-B4 Series RoHS Compliance and Lead Free Relay Information 1. General Information If applicable, relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder plating currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0Cu-Ni will be used for the FTR-B3 and FTR-B4 series relays. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, decaBDE and PFOS). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid lead containing relays (for lead-free sample, etc.) please consult with area sales office. l We will shiplead containing relays as long as the lead containing relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu or Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005. Reflow Solder condition Peak Temp.: max. 250 C Soldering Temperature ( C) 250 Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: 220 Cooling Pre-heating 170 Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. 130 90~120 sec. max. 120 sec. 20~30 sec. (duration) We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level is not applicable to electromechanical relays. l 4. Tin Whisker SnAgCu and SnCuNi solder are known as low risk of tin whisker. No considerable whisker length was found by our in-house test. l FTR-B4 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/relays/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. March 5, 2009. 10