POWER RELAY 1 POLE—120A Inrush Current (CADMIUM FREE CONTACTS TYPE) FTR-F2P SERIES RoHS compliant RoHS compliant n Features SPST 5A Comply with TV-8 rating (120A inrush current) l HIGH DENSITY MOUNTING Saves space by 26% compared to FTR-H1 type. l HIGH ISOLATION Isolation distance between coil and contacts: 6mm Dielectric Strength: 4KV Surge Strength: 10KV l HEAT RESISTANCE, FLAMMABILITY Class B (130° C) insulation, flammability 94V-0 l CADMIUM FREE CONTACT FOR ECO-PROGRAM l SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL/CSA TV-5 rating approved l RoHS compliant since date code: 0437L2 Please see page 7 for more information l l nORDERING INFORMATION [Example] FTR-F2 P L 012 T – ** (a) (b)(c) (d) (e) (f ) (a) Series Name FTR-F2 series (b) Contact Arrangement P: 1 Form A (SPST-NO) (TV-8 rating) (c) Coil Type L: High sensitivity (250mW) M: High sensitivity (250mW) and high isolation (d) Coil Nominal Voltage/ Contact material 005: 5DC 006: 6DC 009: 9DC (e) TV-Rating T: Silver tin oxide (f) Custom Designation (option) To be assigned custom specification 012: 12DC 018: 18DC 024: 24DC FTR-F2P Series nPART NUMBERS High sensitivity (PL) and high sensitivity / high isolation (PM) (250 mW) Ordering Part Number Series Contact Coil Power FTR-F2PL005T Coil Voltage Contact MateriPM 5 FTR-F2PL006T L: 250mW (High sensitivity) FTR-F2PL009T FTR-F2PL012T FTR-F2PL018T FTR-F2PL024T FTR-F2 FTR-F2PM005T FTR-F2PM012T FTR-F2PM018T 12 18 Silver tin oxide 5 M: 250mW (High sensitivity/ high isolation) FTR-F2PM009T 9 24 1 form A FTR-F2PM006T 6 FTR-F2PM024T 6 9 12 18 24 n COIL DATA CHART High sensitivity (PL) and high sensitivity / high isolation (PM) (250 mW) Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance Must Operate ( ±10%) Voltage*2 Must Release Voltage*2 005 5 8.5 VDC 100 Ω 3.5 VDC 0.25 VDC 006 6 10.2 VDC 145 Ω 4.2 VDC 0.3 VDC 009 9 15.3 VDC 325 Ω 6.3 VDC 0.45 VDC 012 12 20.4 VDC 575 Ω 8.4 VDC 0.6 VDC 018 18 30.6 VDC 1,245 Ω 12.6 VDC 0.9 VDC 024 24 40.8 VDC 2,310 Ω 16.8 VDC 1.2 VDC Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage FTR-F2P Series n specifications Item Open type F2 PL ( ) T Contact Coil Arrangement 1 form A (SPST-NO) Material Silver tin oxide Configuration Single Resistance (initial) Maximum 100 mΩ at 6 VDC, 1 A Rating (resistive) 250 VAC / 30 VDC / 5A Maximum Carrying Current 5A Maximum Switching Rating 1250VA / 150W Maximum Switching Voltage 400VAC / 300 VDC Maximum Switching Load*1 100 mA, 5 VDC Nominal Power (20°C) 250 mW Operate Power (20°C) 160 mW Operating Temperature Time Value Operate Time (at nominal voltage) Life -40ºC to +70ºC (no frost) Maximum 15 ms Release Time (at nominal voltage) Maximum 5 ms Mechanical 2 x 106 operations minimum Electrical Other F2 PM ( ) T AC Contact rating 100 x 103 operations min. DC Contact Rating 100 x 103 operations minimum Lamp load (TV-5) 25 x 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 1.5 mm Endurance 10 to 55Hz, at double amplitude of 1.5 mm Shock Resistance Misoperation Weight Endurance Min. 200m/s2 (11±1ms) Min. 1,000m/s2 (11±1ms) Approximately 12g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-F2P Series n INSULATION Item FTR-F2PL ( )T Resistance (initial) (500 VDC) Minimum 1,000 MΩ 1 min. Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 4,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 1.2 x 50µs standard wave 10,000 V Clearance/Creepage 6 mm / 6 mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 2 III a Isolation category / Reference voltage (VDE 0110b) FTR-F2PM ( )T 12,000V B / 250 V n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) 5A, 30 VDC/250VAC (resistive) 1/6 HP, 125VAC 1/2 HP, 250VAC TV-8, 120 VAC Pilot duty: C300 E63614 CSA C22.2 No. 14 LR 40304 SEMKO EN 61058-1: 1992 AND A1 EN 61095:1993 and A1+A11 250 VAC, 5 (1) or 5/80 40T70 Complies with CQC, NEMKO, DEMKO, FIMKO FTR-F2P Series n REFERENCE DATA Temperature Rise (deg) 100 Nominalvoltagemuitiplyingfactor Coil Temperature Rise 80 60 40 5A 0A 20 0 0 0.2 0.4 0.6 0.8 1.0 OperatingRange 2.2 FTR-F2P 2.0 0A .8 5A .6 .4 .2 .0 Opera 0.8 0.6 1.2 0 FTR-F2 1 DC Resistive 20 50 100 200 AC250V COS ø=0.7 DC30 V t=7ms 5 AC250V COS ø=0.4 DC30 V t=15ms 0 3 FTR-F2AK02T N=00 50 40 30 20 Distribution of Contact Resistance 80 100 Make 60 40 FTR-F2AK012T n=100 80 Distribution (%) Release 60 5 DistributionofContactResistance Operate 70 4 00 Distribution(%) Distribution(%) 2 1 Contact load current (A) FTR-F2AK02T N=00 80 FTR-F2 20 500 DistributionofOperate &ReleaseVoltage 90 00 AC250 V DC30 V Contact Voltage (V) 00 80 10 0.2 10 60 Life Curve 50 2 0.5 40 100 Service life (x104 operations) Contact Current (A) AC Resistive 20 Ambienttemperature(°C) Maximum Switching Power 5 olcoil geofco tevolta Opera Coil Power (W) 10 tcoil ofho ltage tevo Make 60 40 20 20 0 0 0 0 20 30 40 50 60 70 80 90 00 NominalVoltageMult.Factor(%) 0 0 2 4 6 8 0 2 Contact Resistance (mΩ) 4 0 2 4 6 8 10 12 14 16 18 20 Contact Resistance (mΩ) FTR-F2P Series nDIMENSIONS l Dimensions 11.0+0.3(.433+.012) 3.3 (.138) 0.5(.020) 25.0 +0.3(.984+.012) 24.0 +0.3(.945+.012) 0.35(.014) 0.4(.016) 16.5 (.650 3.5(.138) 1.75(.069) 1.0(.039) 7.5(.295) l PC board mounting hole layout (BOTTOM VIEW) l Schematics (BOTTOM VIEW) 4 Orientation Mark De-energized condition 2 2-Ø 0.9(.035) 2-Ø1.3(.051) 7.5(.295) 1 1.75(.069) f0.5(.020) 1.8(.071) 3 1.8(.071) 16.5(.650) 3.5(.138) Unit: mm (in.) FTR-F2P Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-F2P Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. October 20, 2008.