FTR-K1 SERIES POWER RELAY 1 POLE - 8A Medium Load Control JS Series n FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, NEMKO, DEMKO, ÖVE, CQC, BSI compliance l UL class B (130°C) coil wire insulation l 1 form A (SPST-NO) or 1 form C (SPDT) contact l Low profile and space saving - Height: 12.5 mm - Mounting space: 290 mm2 l High sensitivity in small package - Operating power 110 to 140 mW - Nominal power 220 to 290 mW l High insulation in small package - Insulation distance : 8 mm (between coil and contacts) - Dielectric strength : 5,000 VAC - Surge strength : 10,000 V l Plastic materials - UL 94 flame class V-0 - UL CTI level class 2 l Plastic sealed type l Various contact material options l RoHS compliant. Please see page 7 for more information l n PARTNUMBER INFORMATION [Example] JS - 12 M (a) (b) (c) E - K T - V3 * (d) (e) (f ) (g) (a) Relay type JS: JS Series (b) ����������� Coil rated voltage����� ������������ 12 ���� ��: 5.....60 VDC ��������� ��� �������������������������� Coil rating table at page 3� �� (c) (d) ���������������������� Contact configuration� ���� Nil M ��: 1 form C (SPDT) �� ����� �������� : 1 form A (SPST-NO) ������������������ Contact material � ���� Nil D E F N ��: Gold plate silver cadmium oxide ����� ������ ��������������� ����� : Silver nickel : Silver cadmium oxide : Gold plate silver nickel : Gold plate silver tin oxide (e) Enclosure K : Plastic sealed type (f) Construction Nil T : 3.2 mm : 5.0 mm (only JS-MN, MD, MF) (g) Gold plating Nil V3 : 0.3μ gold overlay (available with Nil, N and F contact) : 3μ gold overlay for lower current applications (available with Nil, N) and not available for T (5.0mm type) Note: Actual marking omits the hyphen (-) or (*) *: V3 is marked at different position on the relay FTR-K1 SERIES JS SERIES n SPECIFICATION Item Contact Data Life Timing Data Insulation JS - ( ) - K JS - ( ) D/E/F/N - K JS - ( ) - K JS - ( ) N - K 1 form A (SPST-NO), 1 form C (SPDT) Construction Single Material (see part number information) 0.3μ Ag plated 3μ Ag plated Resistance (initial) ≤ 100 mΩ at 6 VDC, 1 A ≤ 30 mΩ at 6 VDC, 1 A Contact rating 8A, 250VAC / 24VDC Max. carrying current 10A Max. switching voltage 400VAC / 150 VDC Max. switching power 2,000VA / 192W Min. switching load * 100 mA, 5 VDC Mechanical 20 x 106 operations minimum 10 mA, 5 VDC AC contact rating 100 x 103 operations minimum (JS-( ) N-K 50 x 103 operations minimum) DC contact rating 100 x 103 operations minimum (JS-( ) N-K 50 x 103 operations minimum) Rated power (at 20 °C) 220 - 290 mW Operate power (at 20 °C) 110 - 140 mW Operating temperature range -40 °C to +85 °C (no frost) Operate (at nominal voltage) ≤ 10ms (no bounce) Release (at nominal voltage) ≤ 5ms (no diode, no bounce) Resistance (initial) ≥ 1,000MOhm at 500VDC Dielectric strength Surge strength Open contacts 1,000VAC (50/60Hz) 1min Contacts to coil 5,000VAC (50/60Hz) 1min Coil to contacts 10,000V / 1.2 x 50µs standard wave Clearance 6 mm Creepage EN61810-1, VDE0435 Other V3 type Configuration Electrical Coil Data Non V3 type Vibration resistance Shock Weight 8 mm Voltage 250V Pollution degree 3 Material group III a Category C / 250V (reference voltage) (VDE 01106) Misoperation>1us 10 to 55Hz double amplitude 1.65mm Endurance 10 to 55Hz double amplitude 3.3mm Misoperation>1us Min. 100m/s² (11 ± 1ms) Endurance Min. 1,000m/s² (6 ± 1ms) Approximately 8 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels. JS SERIES FTR-K1 SERIES n COIL RATING Coil Code Rated Coil Voltage (VDC) 5 5 112 3.5 0.5 11.8 6 6 160 4.2 0.6 14.1 9 9 360 6.3 0.9 21.2 12 12 660 8.5 1.2 28.3 220 18 18 1,455 12.7 1.8 42.4 225 24 24 2,350 16.8 2.4 56.6 245 Coil Resistance +/- 10% (Ohm) Must Operate Must ReleaseMax. Coil Voltage Voltage Voltage (VDC) (VDC) * (VDC) * 48 48 8,000 33.4 4.8 105.6 60 60 12,500 41.7 6 132 Rated Power (mW) 225 290 Note: All values in the table are valid for 20°C and zero contact current. * Specified operate values are valid for pulse wave voltage. n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E 56140 Contact material: Nil, E N 8 A 24 VDC (resistive) 100k 8 A, 250 VDC (resistive) 100k 10 A, 30 VDC (resistive) 10 A, 250 VAC (resistive) 1/4 HP, 125 V/ 250 VAC 1/3 HP, 125 VAC 1/2 HP, 250 VAC Pilot duty: C150, B300 Pilot duty: 0.27A, 250VDC 8 A 24 VDC (resistive) 100k 8 A, 250 VDC (resistive) 100k 10 A, 30 VDC (resistive) 10 A, 250 VAC (resistive) 1/4 HP, 125 V/ 250 VAC 1/3 HP, 125 VAC 1/2 HP, 250 VAC Pilot duty: A300, B300 C150, R300 CSA C22.2 No. 14 LR 35579 VDE 0435, 0631, 0700, 40013847 8 A 250 VAC (cos Ø=1) 8 A 24 VDC (0 ms) SEMKO EN 61058-1 + A1: 1993 EN 61095:1993 + A11 Rated Voltage (V): 250 Rated Current (A): 8 (2) or 8 Also complies with SEV, ÖVE, FIMKO, BSI, CQC, NEMKO, DEMKO FTR-K1 SERIES JS SERIES n CHARACTERISTIC DATA JS SERIES FTR-K1 SERIES n REFERENCE DATA FTR-K1 SERIES JS SERIES n DIMENSIONS l Dimensions JS-MK type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) JS-K type JS-MN( )-KT type FTR-K1 SERIES JS SERIES RoHS Compliance and Lead Free Information 1. General Information All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including amendments. l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005. (Amendment to Directive 2002/95/EC) l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. l 2. Recommended Lead Free Solder Profile Recommended solder Sn-3.0Ag-0.5Cu. l Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. l 4. Tin Whiskers Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. l FTR-K1 SERIES JS SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users’ own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. January 22, 2010