POWER RELAY 2 POLES—8 A LOW PROFILE TYPE FTR-F1 R SERIES RoHS compliant n FEATURES DPST/DPDT 8A Low profile power relay (height 16.5 mm) employing unique construction l Higher isolation by employing reinforced insulation co struction Insulation distance: 8 mm (between coil and contact) Dielectric strength: 5 kV (between coil and contact) Surge strength: 10 kV (between coil and contact) l Pin configuration compatible to VB/FBR620 l UL, CSA, VDE, SEMKO, CQCrecognized l Conforms to FIMKO, IMQ, DEMKO l RoHS compliant since date code: 0434R Please see page 8 for more information l l n ORDERING INFORMATION - 5A Rating Type [Example] (a) FTR-F1 A L 005 R – (**) (a) (b) (c) (d) (e) (f ) Series Name FTR-F1: FTR-F1 Series (b) Contact Arrangement A C : 2 form A (DPST-NO) : 2 form C (DPDT) (c) L : High sensitive type (400 mW) (d) Nominal Voltage 003 005 006 009 : 3 VDC (high sensitive type 'D' only) : 5 VDC 012: 12 VDC : 6 VDC 018: 18 VDC : 9 VDC 024: 24 VDC (e) Contact Rating R : 8A (f) Custom Designation RG : Transparency cover Coil Type Ordering Code: FTR-F1AL005V 048: 48 VDC 060: 60 VDC 100: 100 VDC Actual Marking: F1AL005V 1 FTR-F1 SERIES n PART NUMBERS Ordering Part Number Series Contact Coil Power Coil Roltage FTR-F1AL003R(-RG) 3 FTR-F1AL005R(-RG) 5 FTR-F1AL006R(-RG) A: 2 form A R: 8A RG: Transparency coRer 9 FTR-F1AL012R(-RG) 12 FTR-F1AL024R(-RG) 24 FTR-F1CL003R(-RG) Special Designation 6 FTR-F1AL009R(-RG) FTR-F1AL048R(-RG) Contact Rating FTR-F1 L: 400 mW 48 3 FTR-F1CL005R(-RG) 5 FTR-F1CL006R(-RG) 6 FTR-F1CL009R(-RG) C: 2 form C 9 FTR-F1CL012R(-RG) 12 FTR-F1CL024R(-RG) 24 FTR-F1CL048R(-RG) 48 n COIL DATA CHART 400mW type Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance (±10%) Must Operate Voltage*2 Must Release Voltage*2 003 3 6.0VDC 22.5 Ω 2.25 VDC 0.3 VDC 005 5 10.0 VDC 62 Ω 3.75 VDC 0.5 VDC 006 6 12.0 VDC 90 Ω 4.5 VDC 0.6 VDC 009 9 18.0 VDC 202 Ω 6.75 VDC 0.9 VDC 012 12 24.0 VDC 360 Ω 9 VDC 1.2 VDC 024 24 48.0 VDC 1,440 Ω 18 VDC 2.4 VDC 048 48 96.0 VDC 5,760 Ω 36 VDC 4.8 VDC Nominal Power (mW) 400 Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage FTR-F1 SERIES n SPECIFICATIONS Item Standard Type F1(A, C)L ( )R Transparent Cover F1(A, C)L ( )R-RG Contact Arrangement 2 form A (DPST-NO), 2 form C (DPDT) Material Movable: gold plate silver tin oxide; Stationary: Silver tin oxide Configuration Single Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC Rating (resistive) 8A, 250VAC / 24VDC Maximum Carrying Current*1 8A Maximum Switching Rating 2,000 VA / 192W Maximum Switching Voltage 400 VAC / 300VDC Maximum Switching Load*2 10mA 5 VDC Nominal Power (at 20ºC) 400mW Operate Power (at 20ºC) 225mW Operating Temperature -40ºC to +75°C (no frost) Time Value Operate (without diode) Maximum 15ms (at nominal voltage, no bounce) Release (without diode) Maximum 5ms (at nominal voltage, no bounce) Life Mechanical 2 x 107 ops minimum Coil AC load 5 x 104 ops min. DC load 5 x 104 ops min. Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 1.65mm Endurance 10 to 55Hz, at double amplitude of 3.3mm Shock Resistance Misoperation Electrical Other -40ºC to +70°C (no frost) Endurance Weight 100m/s2 (11±1ms) 1,000m/s2 (6±1ms) Approximately 12g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Item FTR-F1 Note Resistance (initial) Minimum 1,000 MΩ at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. adjacent contacts 3,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 10,000 V Clearance/Creepage 8 mm / 8 mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 3 IIIa Isolation category / Reference voltage (VDE0110b) 1.2 x 50µs standard wave C / 250 V FTR-F1 SERIES n SAFETY STANDARDS Type UL Compliance Contact rating UL 508 Flammability: UL 94-V0 (plastics) 8A, 24VDC (resistive) 8A, 250 VAC (resistive) 1/6 HP, 125VAC 1/4 HP, 250VAC Pilot duty: C300, R300 E63614 CSA C22.2 No. 14 LR 40304 VDE 0435, 0631, 0700, 0860 8A, 250 VAC (cosØ=1) 8 A 24VDC (0ms) Complies with BSI, IMC, CQC, NEMKO, DEMKO, FIMKO n CHARACTERISTIC DATA 8A Rating Type Nominal voltage muitiplying factor 80 8A 60 5A 40 0A 20 0 0 0.2 0.4 0.6 0.8 Coil Power (W) 1 Life Curve 8A 1.4 1.2 e age te volt Opera coil l o o c f o 0.8 0.6 0 20 40 60 Distribution (%) AC250V / DC24 V resistive AC250V COS ø=0.7 10 100 FTR-F1CL012R N=100 DC24V τ=7ms 5 AC250V Cosφ=0.4 DC24V τ=15ms 0 1 2 3 4 100 Release 70 20 50 100 200 60 50 40 30 500 1000 Contact Voltage (V) Distribution of contact resistance FTR-F1CL012R N=100 80 20 2 DC Resistive 10 Operate 80 20 80 Distribution of operate and release voltage 90 1 0.2 Ambient temperature (°C) FTR-CL( )R 50 2 0.5 ltag te vo Opera coil t o h f o 1.0 AC Resistive 5 0A 1.6 100 4 Service life (x10 operations) FTR-F1CL( )R 1.8 1.2 100 1 2.0 10 Distribution (%) Temperature rise (ºC) FTR-F1CL( )R Maximum Switching Power Operating range 2.2 Contact Current (A) Coil temperature rise 100 Make Break 60 40 20 10 5 6 7 8 9 Contact load current (A) 10 0 0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%) 0 0 2 4 6 8 10 12 Contact resistance (mΩ) 14 FTR-F1 SERIES n DIMENSIONS l Schematics (BOTTOM VIEW) l Dimensions FTR-F1A type 2 COM NO 8 COM 7 0.4 5 5.0 3.3 0.4 0.4 5.0 0.3 0.9 (2.1) 20.0 6-ø1.3 4 7.5 1 NO (2.65) 12.8+0.3 16.5+0.3 29.0+0.3 l PC board mounting hole layout (BOTTOM VIEW) (2.65) 20.0 (2.1) 1.0 7.5 29.0+0.3 12.8+0.3 6-ø1.3 4 7.5 16.5+0.3 1 2 3 NO COM NC 0.4 NO COM NC 8 7 6 0.4 0.4 3.3 0.4 0.9 0.3 (2.65) 5.0 5.0 20.0 (2.1) (2.65) FTR-F1C type 7.5 1.0 5 5.0 (2.1) 5.0 20.0 Unit: mm FTR-F1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-F1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 29, 2008