POWER RELAY 1 POLE— 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES FEATURES n l l l l l l l l l n RoHS compliant UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals Plastic sealed type Socket mounting type and socket available Compatible with solid state relays type SJ (see page 365, 366) in size and pin (terminal) arrangement RoHS compliant since date code: 0514Please see page 6 for more information ORDERING INFORMATION [Example] JY – 12 H E – K P*2 (a) (*) (b) (c) (d) (e) (f ) (a) Series Name (b) Nominal Voltage Refer to the COIL DATA CHART (c) Contact Style Nil: 3 A (Single contact) H : 5 A (Single contact) W: 3A (Bifurcated contact) (d) Contact Material Nil: Gold-plate silver cadmium oxide (single type) Nil: Gold overlay silver alloy (bifurcated) E : Silver cadmium oxide (single type) (e) K : Plastic sealed type Enclosure (f ) Terminal Classification JY: JY Series Nil: PC board mounting type P : Socket mounting type (without JY-W) Note: 1. Actual marking omits the hyphen (-) of (*) 2. Actual marking omits the P of (*2) 1 JY SERIES n COIL DATA CHART MODEL Nominal Coil resistance 5 A Type 3 A Type voltage (±10%) JY-( ) H, JY-( ) HE JY-( ), JY-( ) W, JY-( )E Must operate voltage*1 Must release voltage*1 Nominal power JY- 4.5 H ( )-K JY- 4.5 ( )-K 4.5 VDC 100 Ω 3.1 VDC 0.23 VDC 200 mW JY- 5 H ( )-K JY- 5 ( )-K 5 VDC 125 Ω 3.5 VDC 0.25 VDC 200 mW JY- 6 H ( )-K JY- 6 ( )-K 6 VDC 180 Ω 4.2 VDC 0.3 VDC 200 mW JY- 9 H ( )-K JY- 9 ( )-K 9 VDC 405 Ω 6.3 VDC 0.45 VDC 200 mW JY- 12 H ( )-K JY- 12 ( )-K 12 VDC 720 Ω 8.4 VDC 0.6 VDC 200 mW JY- 18 H ( )-K JY- 18 ( )-K 18 VDC 1,620 Ω 12.6 VDC 0.9 VDC 200 mW JY- 24 H ( )-K JY- 24 ( )-K 24 VDC 2,880 Ω 16.8 VDC 1.2 VDC 200 mW JY- 48 H ( )-K JY- 48 ( )-K 48 VDC 6,400 Ω 32.6 VDC 2.4 VDC 360 mW JY-101-K 23.5 VDC 2,760 Ω 15.5 VDC 1.18 VDC 200 mW JY-105-K 12 VDC 720 Ω 8.4 VDC 0.6 VDC 200 mW JY-107-K 5 VDC 125 Ω 3.5 VDC 0.25 VDC 200 mW *1 Note: Specified values are subject to pulse wave voltage. All values in the table are measured at 20°C. JY SERIES n SPECIFICATIONS Item Contact Arrangement Material 3 A Type JY-( ) W 5 A Type JY-( ) JY-( ) E 1 form A (SPST-NO) Gold-plate JY-( ) H JY-( ) HE Gold-plate Silver cadmium Silver cadmium Gold-overlay silver cadmium silver cadmium oxide oxide silver alloy oxide oxide Configuration Bifurcated Single Resistance (initial) (at 1A 6 VDC)Maximum 30 m Ω Rating (resistive) 3 A 250 VAC or 3 A 30 VDC Maximum Carrying Current 5A Maximum Switching Power 750 VA, 90 W Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 3 A Minimum Switching Load*1 0.1 mA 100 mVDC 10 mA 5 VDC Coil Nominal Power (at 20°C) 200 mW (48 V type: 360 mW) Operate Power (at 20°C) 100m W (48 V type: 170 mW) Operating Temperature –40°C to +90°C (no frost) (48V type: +80°C) Time Value Operate (at nominal voltage) Maximum 6 ms Release (at nominal voltage) Maximum 3 ms Insulation Resistance (initial) Minimum 1,000 MΩ (at 500 VDC) between open contacts 750 VAC 1 minute Dielectric Strength between coil and contacts 2,000 VAC 1 minute Surge Strength 4,000 V (at 1.2 × 50 µs standard wave) Life Mechanical 2 × 10 7 operations minimum Electrical 1 × 10 5 operations minimum (contact rating) Other 10 to 55 Hz (double amplitude of 1.5 mm) Vibration Misoperation Resistance Endurance Shock Misoperation Resistance Endurance 100 m/s 2 (11±1 ms) Weight Approximately 5 g Max. 100 mΩ Max. 30 mΩ Max. 100 mΩ 5 A 250 VAC or 5 A 30 VDC 1,250 VA, 150 W 5 A (3A when used with used with socket) 100 mA 5 VDC 10 mA 5 VDC 100 mA 5 VDC 10 to 55 Hz (double amplitude of 4.5 mm) 1,000 m/s 2 (6±1 ms) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. JY SERIES n INSULATION Item 5A Resistance (500VDC) Min. 1,000 MΩ Dielectric strength open contacts 750 VAC 1min. coil and contacts 2,000 VAC 1 min. Surge voltage 3A 4,000V 1.2 x 50µs standard wave n SAFETY STANDARD AND FILE NUMBERS Type Compliance Contact rating UL UL 508 E56 140 CSA C22.2 No. 14 LR35579 Flammabiliaty: UL94V-0 (pastics) [JY-H, JY-HE] 5A, 250 VAC / 30 VDC (resistive) 1/8 HP, 125VAC, 250 VAC Pilot duty code C150 [JY, JY-W, JY-E] 3A, 250 VAC / 30 VDC (resistive) 1/10 HP, 125VAC, 250 VAC Pilot duty: C150 n REFERENCE DATA JY SERIES n REFERENCE DATA JY SERIES n DIMENSIONS l Dimensions JY Type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm n SOCKET DIMENSIONS l PC board mounting hole layout n NOTES Unit: mm 1. Socket ordering code : JK-4N 2. Standard IC socket is not recommended. Please use socket "JK-4N". JY SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. JY SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: http://www.fujitsu.com/emea/services/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. November 30, 2007.