POWER RELAY 1 POLE— 5 A (MEDIUM LOAD CONTROL) VE SERIES RoHS compliant n FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact l Low cost, miniature relay with big performance in small package —Higher surge voltage type is available (6,000 V) —2,000 VAC between coil and contacts l Slim type—meets high density mounting requirement l Wide operating range l Easy circuit design with completely separated terminal arrangement (coil and contact terminals) l Plastic sealed type l RoHS compliant since date code: 0434R Please see page 8 for more information l Crepage min. 3.2 mm l l n ORDERING INFORMATION [Example] VE – 12 H M S E – K – HV – VD (a) (*) (b) (c) (d) (e) (f ) (g) (h) (i) (a) (b) Series Name VE: VE Series Nominal Voltage Refer to the COIL DATA CHART (c) Contact Rating H : Heavy duty type (d) Contact Arrangement Nil: 1 form C (SPDT) M : 1 form A (SPST-NO) (e) Coil Type Nil: Standard type (360 mW) S : High sensitivity type (250 mW) (f) Contact Material (Rating) Nil: Gold overlay silver-nickel (N.C.: 3 A, N.O.: 5 A) E : Silver-nickel (N.C.: 3 A, N.O.: 5 A) 5 : Silver cadmium oxide (N.C.: 5 A, N.O.: 5 A) (g) Enclosure K : Plastic sealed type (h) Surge Strength Nil: Standard type (4,000 V) HV: High dielectric strength type (6,000 V) (i) Standard VD: UL, CSA, VDE approved type Note: Actual marking omits the hyphen (-) of (*) 1 VE SERIES n COIL DATA CHART Coil Must Nominal resistance operate voltage (±10%) voltage* Must release voltage* Nominal power VE- 5H (M) (E)-K VE- 5H (M) 5-K 5 VDC 69 Ω 3.5 VDC 0.25 VDC 360 mW VE- 6H (M) (E)-K VE- 6H (M) 5-K 6 VDC 100 Ω 4.2 VDC 0.3 VDC 360 mW VE- 9H (M) (E)-K VE- 9H (M) 5-K 9 VDC 225 Ω 6.3 VDC 0.45 VDC 360 mW VE 12H (M) (E)-K VE-12H (M) 5-K 12 VDC 400 Ω 8.4 VDC 0.6 VDC 360 mW VE-18H (M) (E)-K VE-18H (M) 5-K 18 VDC 900 Ω 12.6 VDC 0.9 VDC 360 mW VE-24H (M) (E)-K VE-24H (M) 5-K 24 VDC 1,600 Ω 16.8 VDC 1.2 VDC 360 mW VE-48H (M) (E)-K VE-48H (M) 5-K 48 VDC 6,400 Ω 33.6 VDC 2.4 VDC 360 mW VE- 5H (M) S (E)-K VE- 5H (M) S5-K 5 VDC 100 Ω 3.6 VDC 0.25 VDC 250 mW VE- 6H (M) S (E)-K VE- 6H (M) S5-K 6 VDC 145 Ω 4.3 VDC 0.3 VDC 250 mW VE- 9H (M) S (E)-K VE- 9H (M) S5-K 9 VDC 325 Ω 6.5 VDC 0.45 VDC 250 mW VE 12H (M) S (E)-K VE-12H (M) S5-K 12 VDC 575 Ω 8.6 VDC 0.6 VDC 250 mW VE-18H (M) S (E)-K VE-18H (M) S5-K 18 VDC 1,300 Ω 13.0 VDC 0.9 VDC 250 mW VE-24H (M) S (E)-K VE-24H (M) S5-K 24 VDC 2,310 Ω 17.3 VDC 1.2 VDC 250 mW VE-48H (M) S (E)-K VE-48H (M) S5-K 48 VDC 9,220 Ω 34.7 VDC 2.4 VDC 250 mW Standard Type High Sensitive Type MODEL VE-( ) HM VE-( ) HME VE-( ) HM5 VE-( ) H VE-( ) HE VE-( ) H5 Note: All values in the table are measured at 20 °C. *: Specified values are subject to pulse voltage. VE SERIES n SPECIFICATIONS Item Contact VE-( ) HM(S)E-K VE-( ) HM(S)-K Arrangement 1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) 1 form C (SPDT) Material Gold overlay silver nickel, silver nickel Silver-cadmium oxide alloy Style Single Resistance (initial) (at 1 A 6 VDC) VE-( ) H(S)E-K VE-( ) HM(S)5-K VE-( ) H(S)-K Maximum 70 mΩ (VE-HM, H) Maximum 100 mΩ (VE-HME, HE) VE-( ) H(S)5-K Maximum 200 mΩ Rating (resistive) 5 A 250 VAC 5 A 250 VAC (N.O.) 5 A 250 VAC 3 A 250 VAC (N.C.) Maximum Carrying Current 7A Maximum Switching Power 1,250 VA (N.O.) 1,250 VA 750 VA (N.C.) Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 5 A 5 A (N.O.) 5 A 3 A (N.C.) Minimum Switching Load*1 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5) Coil Nominal Power (at 20°C) Standard type: 360 mW. High sensitivity type: 250 mW Operate Power (at 20°C) Standard type: 177 mW. High sensitivity type: 130 mW Operating Temperature Standard: –40°C to +85°C. High sensitivity: –40°C to +90°C (no frost) Time Value Operate (at nominal voltage) Maximum 10 ms Release (at nominal voltage) Maximum 5 ms Life Mechanical 1 × 107 operations minimum Electrical (at Rating) Standard Type: 1 × 105 ops. min. High sensitivity type: 5 x 104 ops. min. Other Vibration Misoperation Resistance Endurance 10 to 55 Hz (double amplitude of 3.3 mm) Shock Misoperation Resistance Endurance 100 m/s2 (11 ±1 ms) 500 m/s2 (6 ±1 ms) Weight Approximately 8 g 1,250 VA 10 to 55 Hz (double amplitude of 3.3 mm) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. VE SERIES n INSULATION Item VE - ( ) HME VE - ( ) HM Resistance (initial) Minimum 1,000 MΩ 1 min. Dielectric Strength 1,000 VAC 1 min. open contacts VE - ( ) HE VE - ( ) H 750 VAC 1 min. VE - ( ) HM5 VE - ( ) H5 Note at 500 VDC 1,000 VAC 1 min. 750 VAC 1 min. coil and contacts 2,000 VAC 1 min. Surge Voltage (coil and contact) Standard: 4,000 V, High Sensitive: 6,000V 1.2 x 50µs standard wave n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 E56140 CSA C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) VE-( )-H: 5A, 250VA/30VDC (N.O. resistive) 3A, 250VAC (N.C. resistive) 5A, 30VDC (N.C. resistive) 1/14 HP, 250VAC /125VAC VE-( )-HM 5A, 250VAC/30VDC (resistive) 1/12 HP, 250VAC /125VAC VE-( )-H5 5A, 250VAC/30VDC (N.O. resistive) 1/10 HP, 250VAC /125VAC (N.O. resistive) 5A, 250VAC/30VDC (N.C. resistive) 1/14 HP, 250VAC /125VAC (N.C. resistive) VE-( )-HM5 5A, 250VAC/30VDC (resistive) 1/10 HP, 250VAC /125VAC VDE Complies with CQC VE SERIES n REFERENCE DATA VE SERIES n DIMENSIONS l Dimensions VE-M type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) VE type Unit: mm VE SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. VE SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. November 29, 2007