MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) RY SERIES RoHS compliant n FEATURES Ultra high sensitivity UL, CSA recognized l Conforms to FCC rules and regulations Part 68 —Surge strength 1,500 V l High dielectric strength type available (RY-WF type) l Contact arrangement MBB type available (RY-D type) l High reliability-bifurcated contacts l Wide operating range l DIL pitch terminals l Plastic sealed type l RoHS compliant since date code: 0438B9 Please see page 8 for more information l l n ORDERING INFORMATION [Example] (a) (b) RY – 12 WF – K (a) ( * ) (b) (c) (d) Series Name Nominal Voltage (c) Coil and Contact Function (d) Enclosure RY : RY Series Refer to the COIL DATA CHART W : High sensitive type WZ : Nominal 0.5 W type WF : High dielectric strength type WFZ: 2 A type D : 2 FORM D (2 MBB type) K : Plastic sealed type Note: Actual marking omits the hyphen (-) of (*) For movable and stationary contact with gold overlay type, add suffix “–OH”. 1 RY SERIES Must operate voltage Must release voltage Nominal power 135Ω 3.2 VDC 0.23 VDC 150 mW 5 VDC 165Ω 3.6 VDC 0.25 VDC 150 mW RY- 6 W-K 6 VDC 240Ω 4.3 VDC 0.3 VDC 150 mW RY- 9 W-K 9 VDC 540Ω 6.4 VDC 0.45 VDC 150 mW RY- 12 W-K 12 VDC 960Ω 8.5 VDC 0.6 VDC 150 mW RY- 18 W-K 18 VDC 1,620Ω 12.6 VDC 0.9 VDC 200 mW RY- 24 W-K 24 VDC 2,880Ω 16.8 VDC 1.2 VDC 200 mW RY- 48 W-K 48 VDC 7,680Ω 32.6 VDC 2.4 VDC 300 mW RY- 3 WZ-K 3 VDC 18Ω 1.5 VDC 0.15 VDC 500 mW RY-4.5 WZ-K 4.5 VDC 36Ω 2.25 VDC 0.23 VDC 560 mW RY- 5 WZ-K 5 VDC 45Ω 2.5 VDC 0.25 VDC 560 mW RY- 6 WZ-K 6 VDC 66Ω 3.0 VDC 0.3 VDC 550 mW RY- 9 WZ-K 9 VDC 140Ω 4.5 VDC 0.45 VDC 580 mW RY- 12 WZ-K 12 VDC 280Ω 6.0 VDC 0.6 VDC 510 mW RY- 18 WZ-K 18 VDC 560Ω 9.0 VDC 0.9 VDC 580 mW RY- 24 WZ-K 24 VDC 1,070Ω 12.0 VDC 1.2 VDC 540 mW RY- 48 WZ-K 48 VDC 4,000Ω 24.0 VDC 2.4 VDC 580 mW RY- 5 WF-K 5 VDC 56Ω 3.3 VDC 0.25 VDC 450 mW RY- 6 WF-K 6 VDC 80Ω 4.0 VDC 0.3 VDC 450 mW RY- 9 WF-K 9 VDC 180Ω 6.0 VDC 0.45 VDC 450 mW RY- 12 WF-K 12 VDC 320Ω 8.0 VDC 0.6 VDC 450 mW RY- 18 WF-K 18 VDC 720Ω 12.0 VDC 0.9 VDC 450 mW RY- 24 WF-K 24 VDC 1,260Ω 15.9 VDC 1.2 VDC 450 mW RY- 48 WF-K 48 VDC 5,000Ω 33.0 VDC 2.4 VDC 460 mW RY- 3 WFZ-K 3 VDC 18Ω 1.9 VDC 0.15 VDC 500 mW RY-4.5 WFZ-K 4.5 VDC 36Ω 2.9 VDC 0.23 VDC 560 mW RY- 5 WFZ-K 5 VDC 45Ω 3.2 VDC 0.25 VDC 560 mW 2 A Type n COIL DATA CHART MODEL RY-4.5 W-K 4.5 VDC RY- 5 W-K RY- 6 WFZ-K 6 VDC 66Ω 3.8 VDC 0.3 VDC 550 mW RY- 9 WFZ-K 9 VDC 140Ω 5.7 VDC 0.45 VDC 580 mW RY- 12 WFZ-K 12 VDC 280Ω 7.6 VDC 0.6 VDC 510 mW RY- 18 WFZ-K 18 VDC 560Ω 11.4 VDC 0.9 VDC 580 mW RY- 24 WFZ-K 24 VDC 1,070Ω 15.2 VDC 1.2 VDC 540 mW RY -48 WFZ-K 48 VDC 4,000Ω 36.0 VDC 2.4 VDC 580 mW High Dielectric Strength 500 mW Type High Sensitive Type Nominal voltage Coil resistance (±10%) Note : All values in the table are measured at 20°C. MODEL RY-4.5 D-K 4.5 VDC Continuous (MBB) Type RY SERIES Must operate voltage Must release voltage Nominal power 45Ω 3.0 VDC 0.23 VDC 450 mW RY- 5 D-K 5 VDC 55Ω 3.3 VDC 0.25 VDC 450 mW RY- 6 D-K 6 VDC 80Ω 3.95 VDC 0.3 VDC 450 mW RY- 9 D-K 9 VDC 180Ω 5.9 VDC 0.45 VDC 450 mW RY- 12 D-K 12 VDC 320Ω 7.9 VDC 0.6 VDC 450 mW RY- 18 D-K 18 VDC 720Ω 11.8 VDC 0.9 VDC 450 mW RY- 24 D-K 24 VDC 1,280Ω 15.8 VDC 1.2 VDC 450 mW RY- 48 D-K 48 VDC 4,800Ω 31.8 VDC 2.4 VDC 480 mW Nominal voltage Coil resistance (±10%) Note : All values in the table are measured at 20°C. RY SERIES n SPECIFICATIONS Item Contact Arrangement High 500 mW Sensitive Type Type RY-( ) W-K High Continuous Dielectric 2 A Type (MBB) Strength Type RY-( ) WZ-K RY-( ) WF-K RY-( ) WFZ-K RY-( ) D-K 2 form C (DPDT) 2 Form D (2 MBB) Material Gold overlay silver-palladium Gold overlay G old overlay silver-nickel silver-palladium Style Bifurcated (cross bar) Resistance (initial) Maximum 100 mΩ (at 1 A 6 VDC) Maximum Carrying Current 1.25 A 2 A 1 A 24 VDC 0.25 A 120 VAC Rating (resistive) 1 A 24 VD 0.5 A 120 VAC Maximum Switching Power 60 VA/24 W Maximum Switching Voltage 120 VAC, 60 VDC Maximum Switching Current 1 A 1 30 VA/24 W Single 0.6 A 2 A 30 VDC 0.15 A 48 VDC 0.5 A 125 VAC 0.3 A 120 VAC 62.5 VA/60 W 36 VA/7.2 W 125 VAC, 150 VDC 120 VAC, 60 VDC 2 A 0.01 mA 10 mVDC 0.6 A 0.1 mA 10 mVDC Minimum Switching Load* Capacitance (at 10MHz) pprox. 0.9 pF (between open contacts) 1.4 pF (adjacent contacts) A Approx. 1.9 pF (between coil and contacts) Coil Nominal Power (at 20°C) 150 to 300 mW 500 to 580 mW 450 to 460 mW 500 to 580 mW 450 to 480 mW Operate Power (at 20°C) 75 to 140 mW 125 to 145 mW 200 to 210 mW 200 to 324 mW 200 to 210 mW Operating Temperature (No frost) –30°C to +90°C –30°C to +60°C (refer to the CHARACTERISTIC DATA) –30°C to +70°C (*+80ºC) (*2 +65ºC) Time Value Operate (at nominal voltage) Maximum 6 ms Release (at nominal voltage) Maximum 3 ms Life Mechanical 2 × 107 ops. min. 1 × 107 operations minimum 1 × 106 ops. min. Electrical (at contact rating) 2 × 105 ops. min. (0.5 A 120 VAC) 5 × 105 ops. min. 1 × 105 ops. min. 2 × 105 opsmin. 5 × 105 ops. min. ( 1 A 24 VD C) (0.25 A 120 VAC (2 A 30 VDC) (0.3 A 120 VAC) 1 A 24 VDC 5 × 105 ops. min. (0.15 A 48 VDC) Other Vibration Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) Resistance Endurance 10 to 55 Hz (double amplitude of 4.5 mm) Shock Misoperation 100 m/s2 (11±1 ms) Resistance Endurance 1,000 m/s2 ( 6±1 ms) Weight Approximately 5 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. *2 48VDC type n INSULATION Item Sensitive Isolation (initial) Minimum 1,000 MΩ (at 500VDC) Dielectric Strength Surge Voltage 500mW open contact 500VAC 1 min., coil and contact/ adjacent contacts 1,000VAC 1 min., High Isolation 1,000VAC 1 min., 2A MBB 500VAC 1 min., 1500V (coil-contact) (10/160 µs standard wave) RY SERIES n SAFETY STANDARDS Type Compliance Contact rating UL UL 478, UL 508 E 45026 CSA C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) [RY-W, RY-WZ] 0.5A, 120VAC (resistive) 1A, 24VDC (resistive) 0.3A, 60VDC (resistive) [RY-WF] 0.25A, 120VAC (resistive) 1A, 24VDC (resistive) 0.3A, 60VDC (resistive) [RY-D] 0.3A, 120VAC (resistive) 0.2A, 60VDC (resistive) [RY-WFZ] (only CSA) 0.5A, 125VAC (resistive) 2A, 30VDC (resistive) 0.6A, 110VDC (resistive) n CHARACTERISTIC DATA RY SERIES n CHARACTERISTIC DATA n REFERENCE DATA RY SERIES n REFERENCE DATA n DIMENSIONS l Dimensions l Schematics (Bottom view) l PC board mounting hole layout (Bottom view) Unit: mm RY SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHSon October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. RY SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 18, 2008.