SLRS049E − FEBRUARY1997 − REVISED JULY 2006 D 500-mA Rated Collector Current (Single D D D D D DW OR N PACKAGE (TOP VIEW) Output) High-Voltage Outputs . . . 50 V Output Clamp Diodes Inputs Compatible With Various Types of Logic Relay Driver Applications Compatible with ULN2800A Series 1B 2B 3B 4B 5B 6B 7B 8B GND description/ordering information 1 18 2 17 3 16 4 15 5 14 6 13 7 12 8 11 9 10 1C 2C 3C 4C 5C 6C 7C 8C COM The ULN2803A is a high-voltage, high-current Darlington transistor array. The device consists of eight npn Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of each Darlington pair is 500 mA. The Darlington pairs may be connected in parallel for higher current capability. Applications include relay drivers, hammer drivers, lamp drivers, display drivers (LED and gas discharge), line drivers, and logic buffers. The ULN2803A has a 2.7-kΩ series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices. ORDERING INFORMATION PDIP (N) −40°C −40 C to 85 85°C C ORDERABLE PART NUMBER PACKAGE† TA SOIC (DW) Tube of 20 ULN2803AN Tube of 40 ULN2803ADW Reel of 2000 ULN2803ADWR TOP-SIDE MARKING ULN2803AN ULN2803A † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2006, Texas Instruments Incorporated !" #$ # % & ## '($ # ) # "( "# ) "" $ POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SLRS049E − FEBRUARY1997 − REVISED JULY 2006 logic diagram 1B 2B 3B 4B 5B 6B 7B 8B 1 18 2 17 3 16 4 15 5 14 6 13 7 12 8 11 10 1C 2C 3C 4C 5C 6C 7C 8C COM schematic (each Darlington pair) COM Output C 2.7 kΩ Input B 7.2 kΩ 3 kΩ E 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLRS049E − FEBRUARY1997 − REVISED JULY 2006 absolute maximum ratings at 25°C free-air temperature (unless otherwise noted)† Collector-emitter voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 V Input voltage (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Continuous collector current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mA Output clamp diode current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 mA Total substrate-terminal current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −2.5 A Package thermal impedance, θJA (see Notes 2 and 3): DW package . . . . . . . . . . . . . . . . . . . . . . . 73.14°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . 62.66°C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the emitter/substrate terminal GND. 2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. electrical characteristics at 25°C free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT ICEX Collector cutoff current VCE = 50 V, See Figure 1 II = 0, II(off) Off-state input current VCE = 50 V, TA = 70°C, IC = 500 µA, See Figure 2 II(on) Input current VI = 3.85 V, See Figure 3 2.4 VCE = 2 V, See Figure 4 IC = 200 mA IC = 250 mA IC = 300 mA IC = 100 mA, 3 0.9 1.1 II = 350 µA, See Figure 5 IC = 200 mA, 1 1.3 II = 500 µA, See Figure 5 IC = 350 mA, 1.3 1.6 See Figure 6 See Figure 7 1.7 2 V f = 1 MHz 15 25 pF TYP MAX VI(on) On-state input voltage II = 250 µA, See Figure 5 VCE(sat) Collector-emitter saturation voltage IR VF Clamp diode reverse current Clamp diode forward voltage VR = 50 V, IF = 350 mA, Ci Input capacitance VI = 0 V, 50 50 µA 65 0.93 µA 1.35 2.7 50 mA V V µA switching characteristics at 25°C free-air temperature PARAMETER TEST CONDITIONS tPLH tPHL Propagation delay time, low- to high-level output VOH High-level output voltage after switching Propagation delay time, high- to low-level output POST OFFICE BOX 655303 VS = 50 V, CL = 15 pF, RL = 163 Ω, See Figure 8 VS = 50 V, See Figure 9 IO ≈ 300 mA, • DALLAS, TEXAS 75265 MIN UNIT 130 20 VS − 20 ns mV 3 SLRS049E − FEBRUARY1997 − REVISED JULY 2006 PARAMETER MEASUREMENT INFORMATION Open VCE Open VCE IC II(off) ICEX Open Figure 1. ICEX Test Circuit Figure 2. II(off) Test Circuit Open Open IC II VI Open VI VCE Figure 3. II(on) Test Circuit Figure 4. VI(on) Test Circuit Open IC hFE = II IC II VR IR Open VCE Figure 6. IR Test Circuit Figure 5. hFE, VCE(sat) Test Circuit 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLRS049E − FEBRUARY1997 − REVISED JULY 2006 PARAMETER MEASUREMENT INFORMATION IF VF Open Figure 7. VF Test Circuit Input Open VS = 50 V RL = 163 Ω Pulse Generator (see Note A) Output CL = 15 pF (see Note B) Test Circuit <5 ns Input 10% <10 ns 90% 50% 90% 50% VIH (see Note C) 10% 0 0.5 µs tPHL tPLH VOH Output 50% 50% Voltage Waveforms NOTES: A. The pulse generator has the following characteristics: PRR = 1 MHz, ZO = 50 Ω. B. CL includes probe and jig capacitance. C. VIH = 3 V Figure 8. Propagation Delay Times POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 SLRS049E − FEBRUARY1997 − REVISED JULY 2006 PARAMETER MEASUREMENT INFORMATION VS Input 2 mH 163 Ω Pulse Generator (see Note A) Output CL = 15 pF (see Note B) Test Circuit <5 ns Input 10% <10 ns 90% 1.5 V 90% 1.5 V VIH (see Note C) 10% 0 40 µs VOH Output Voltage Waveforms NOTES: A. The pulse generator has the following characteristics: PRR = 12.5 KHz, ZO = 50 Ω. B. CL includes probe and jig capacitance. C. VIH = 3 V Figure 9. Latch-Up Test 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 SLRS049E − FEBRUARY1997 − REVISED JULY 2006 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 21-May-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty ULN2803ADW ACTIVE SOIC DW 18 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR ULN2803ADWG4 ACTIVE SOIC DW 18 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR ULN2803ADWR ACTIVE SOIC DW 18 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR ULN2803ADWRG4 ACTIVE SOIC DW 18 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR ULN2803AN ACTIVE PDIP N 18 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ULN2803ANE4 ACTIVE PDIP N 18 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device ULN2803ADWR Package Package Pins Type Drawing SOIC DW 18 SPQ Reel Reel Diameter Width (mm) W1 (mm) 2000 330.0 24.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 10.9 12.0 2.7 12.0 24.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 26-Mar-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) ULN2803ADWR SOIC DW 18 2000 370.0 355.0 55.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP® Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee® Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2009, Texas Instruments Incorporated