NKK SS22SBH4

Ultra-Miniature Slides
Series SS
Distinctive Characteristics
Top or side actuation permits flexible board design.
Compact dimensions and low profile allow
high density mounting and close stacking of
PC boards.
Crisp actuation positively indicates circuit status.
Double molded thermoset base and thermoplastic housing prevent loosening of terminals
due to high soldering temperatures.
Award-winning STC mechanism with benefits
unavailable in conventional mechanisms: smoother,
positive detend actuation, increased contact stability,
and unparalleled logic-level reliability. (Additional STC
details in Terms and Acronyms in the Supplement section.)
Insert molded terminals lock out flux, solvents, and other contaminants.
Inch or metric terminal spacing for standard PC board grid (.100” x .100” or 2.0mm x 2.0mm).
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Ultra-Miniature Slides
Series SS
General Specifications
Electrical Capacity (Resistive Load)
Power Level (code 2):
Logic Level (code 4):
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Contact Timing:
Total Travel:
Materials & Finishes
Actuator:
Upper Case:
Lower Case:
Movable Contactor:
Interior Base:
Terminals:
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
PCB Processing
Soldering:
Cleaning:
0.1A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
20 milliohms maximum for power level; 40 milliohms maximum for logic level
100 megohms minimum @ 500V DC
500V AC minimum 1 minute minimum
10,000 operations minimum
10,000 operations minimum
Shorting (make-before-break)
.079” (2.0mm)
Polyamide
Polyester for 3-On models; polyacetal for all other models
Glass fiber reinforced polyester for 3-On models;
glass fiber reinforced polybutylene terephthalate (thermoplastic) for other models
Phosphor bronze with silver plating (code 2) or
phosphor bronze with gold plating (code 4)
Phenolic resin (thermoset)
Brass with silver plating over copper plating or brass with gold plating
–15°C through +60°C (+5°F through +140°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering: See Profile B in Supplement section.
Manual Solder: See Profile B in Supplement section.
Hand clean locally using alcohol based solution.
Standards & Certifications
UL Recognition or
CSA Certification:
The SS series devices have not been tested for UL recognition and CSA certification.
These switches are designed for se in a low-voltage, low-current circuit.
When used as intended in a low-voltage, low-current circuit, the results do not produce
hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series SS
Ultra-Miniature Slides
TYPICAL SWITCH ORDERING EXAMPLE
SS
D
12S
2
P
POLES & CIRCUITS
CONTACT MATERIAL
& RATINGS
12S
SPDT
ON
NONE
ON
*14M
SP3T
ON
ON
ON
2
Silver Rated 0.1A @ 30V DC
22S
DPDT
ON
NONE
ON
*4
Gold Rated 0.4VA maximum
@ 28V AC/DC maximum
See Poles & Circuits chart below.
* Gold not available with SS14M.
* 14M Circuit with silver contacts only.
TERMINAL SPACING
ACTUATION
B
Metric 2.0mm x 2.0mm
P
Top Actuated
D
Inch .100” x .100”
H
Side Actuated
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
SS12SDP2
Top Actuated
SPDT ON-NONE-ON Circuit
Silver Contacts Rated 0.1A @ 30V DC
Terminals with .100” Spacing
POLES & CIRCUITS
Slide Position
Right
Pole
Model
SP
SS12S
Center
Connected Terminals
Left
Right
Center
Throw & Schematics
Left
Note: Terminal numbers are not actually on switch.
ON
NONE
ON
2-1
OPEN
2-3
SPDT
1
2 (COM)
3
Make-Before-Break
SP
SS14M
ON
ON
ON
3-4
3-2
3-1
SP3T
DP
SS22S
ON
NONE
ON
2-1 5-4
OPEN
2-3 5-6
DPDT
4
3 (COM)
1
2
2 (COM)
ON-OFF-ON circuit
can be created by not
connecting terminal 2.
1
3
4
5 (COM)
6
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series SS
Ultra-Miniature Slides
TERMINAL SPACING
B
Metric 2.0mm x 2.0mm with Black Base
(0.4) Typ
.016
(0.4) Typ
.016
(2.0) Typ
.079
(0.6) Typ
.024
(4.0)
.157
(2.0) Typ
.079
(0.6) Typ
.024
(3.4)
.134
(10.2)
.402
(4.0)
.157
(2.0) Typ
.079
(0.6) Typ
.024
(4.0)
.157
(3.4)
.134
(10.0)
.394
(6.0)
.236
1
2
3
(0.4) Typ
.016
(2.0)
.079
(2.0) Typ
.079
4
1
5
6
2
4
(2.0) Typ
.079
(4.0)
.157
3
2
1
3
(0.8) Dia Typ
.031
(0.8) Dia Typ
.031
(2.0) Typ
.079
(0.8) Dia Typ
.031
(2.0)
.079
On-None-On Single Pole Models
D
(3.4)
.134
On-None-On Double Pole Models
3-On Models
Inch .100” x .100” with Gray Base
(0.4) Typ
.016
(2.54) Typ
.100
(0.6) Typ
.024
(4.0)
.157
(0.4) Typ
.016
(2.54) Typ
.100
(3.4)
.134
(0.4) Typ
.016
(2.54)
.100
(3.4)
.134
(0.6) Typ
.024
(10.2)
.402
(5.08)
.200
(2.54) Typ
.100
(0.6) Typ
.024
(4.0)
.157
(6.54)
.257
(10.2)
.402
(3.4)
.134
4
1
(2.54) Typ
.100
2
4
1
5
2
6
3
3
(0.8) Dia Typ
.031
On-None-On Single Pole Models
(2.54) Typ
.100
3
(5.08)
.200
2
1
(0.8) Dia Typ
.031
(2.54) Typ
.100
(2.54)
.100
(0.8) Dia Typ
.031
On-None-On Double Pole Models
3-On Models
ACTUATION
P
Top Actuated
(2.0)
.079
(1.2)
.047
(1.5)
.059
H
Side Actuated
(2.5)
.098
(1.2)
.047
(1.5)
.059
CONTACT MATERIALS & RATINGS
2
Silver over Phosphor Bronze
Power Level
0.1A @ 30V DC
4
Gold over Silver/Phosphor Bronze
Logic Level
0.4VA max @ 28V AC/DC max
Complete explanation of operating range in Supplement section.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series SS
Ultra-Miniature Slides
TYPICAL SWITCH DIMENSIONS
Top Actuated
Single & Double Pole
(3.3)
.130
(2.0) Travel
.079
(1.2)
.047
(1.5)
.059
(2.0)
.079
(1.2)
.047
(4.0)
.157
(3.0)
.118
(0.6) Typ
.024
(2.54) Typ
.100
(0.4)
.016
(4.5)
.177
(6.54)
.257
1
3
4
1
(10.2)
.402
2
2
5
3
6
(10.2)
.402
(0.4) Typ
.016
(2.54)
.100
(0.4)
.016
SS12SDP2
Side Actuated
Single & Double Pole
(3.3)
.130
(2.0) Travel
.079
(3.3)
.130
(1.2)
.047
(3.5)
.138
(2.0) Travel
.079
(0.6) Typ
.024
1
2
(1.5)
.059
(2.5)
.098
(1.5)
.059
(2.5)
.098
(5.0)
.197
(6.54)
.257
(4.0)
.157
(2.54) Typ
.100
(0.4)
.016
(3.0)
.118
3
(10.2)
.402
1
4
2
5
3
6
(10.2)
.402
(0.4) Typ
.016
(2.54)
.100
(0.4)
.016
SS12SDH2
3-On Circuit • Top Actuated
Single Pole
(0.4)
.016
(2.0) Travel Typ
.079
(0.6) Typ
.024
(5.08)
.200
4
3
2
(1.5)
.059
(2.0)
.079
(1.2)
.047
(4.0)
.157
(4.5)
.177
(2.54) Typ
.100
(3.0)
.118
(15.8)
.622
1
(0.4)
.016
SS14MDP2
3-On Circuit • Side Actuated
Single Pole
(3.5)
.138
(0.4)
.016 (0.6) Typ
.024
(2.0) Travel Typ
.079
(5.08)
.200
4
3
2
(1.5)
.059
(2.5)
.098
(4.0)
.157
(2.54) Typ
.100
(3.0)
.118
(1.2)
.047
(5.0)
.197
(15.8)
.622
1
(0.4)
.016
SS14MDH2
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07