Medium Capacity Rockers Series SW GENERAL SPECIFICATIONS FOR SW3000s Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw (α): 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 30,000 operations minimum 10,000 operations minimum Shown on drawings or following tables Materials & Finishes Rocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contactor Plate: Movable & Stationary Contacts: Terminals: Urea resin; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Melamine phenol Copper with silver plating Silver alloy plus copper with silver plating Copper with tin plating Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Sealing: Dustproof cover of silicone rubber on SW3006A, SW3007A, & SW3008A Installation Maximum Panel Thickness: Shown with following drawings Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications R R V D E UL Recognized: Designated with UL recognized symbol beside part numbers on following pages See Supplement section to find UL rating details. UL File No. WOYR2.E44145 Add “/U” to end of part number to order UL mark on switch. C-UL Recognized: Designated with C-UL recognized symbol beside part numbers on following pages See Supplement section to find C-UL rating details. C-UL File No. WOYR8.E44145 Add “/C-UL” to end of part number to order C-UL mark on switch. CSA Certified: Designated with CSA certified symbol beside part numbers on following pages See Supplement section to find CSA rating details. CSA File No. 023535-0-000; Add “/C” to end of part number to order CSA mark on switch. VDE Approved: SW3006A at 20A @ 125V AC & 10A @ 250V AC; VDE License No. 119189; Add “/V” to end of part number to order VDE mark on switch. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-07 Series SW Medium Capacity Rockers SINGLE POLE WITH SOLDER LUG Rocker Position/Connected Terminals Down Model Approvals SW3001A R SW3002A R SW3003A R Throw & Schematics: Electrical Capacity Center Resistive Up Pole Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw SPST ON 1-3 NONE OFF — 15A 6A 15A 10A 24° SPDT ON 2-3 NONE ON 2-1 15A 6A 15A 10A 24° SPDT ON 2-3 OFF ON 2-1 15A 6A 15A 10A 28° SPST 1 3 2 (COM) INTERNAL CONNECTION SPDT (9.7) .382 M3 x 6 3 (2.4) Dia Typ .094 Note: Terminal numbers are actually on the switch. 1 (0.8) Typ .031 (3.5) Dia Typ .138 3 (38.0) 1.496 (27.0) 1.063 (21.4) .843 (4.8) Typ .189 α (13.5) .531 (30.0) 1.181 (45.0) 1.772 2 1 (5.7) .224 (1.0) .039 (31.3) 1.232 (5.7) .224 (28.0) 1.102 (38.0) 1.496 (14.5) .571 (18.0) .709 Maximum Effective Panel Thickness: .197” (5.0mm) for SW3001A & SW3002A models; .177” (4.5mm) for SW3003A models SW3001A DOUBLE POLE WITH SOLDER LUG Rocker Position/Connected Terminals ( ) = Momentary Down Model SW3006A SW3007A SW3008A Approvals R R Resistive Up Pole AC 250V DC 30V AC 125V PF 0.6 α= Angle of Throw ON 2-3 5-6 NONE ON 2-1 5-4 20A 10A 20A 10A 24° DPDT ON 2-3 5-6 OFF ON 2-1 5-4 15A 6A 15A 10A 28° (ON) 2-3 5-6 OFF (ON) 2-1 5-4 15A 6A 15A 10A 24° 2 DPDT 3 5 (COM) 1 6 Note: Terminal numbers are actually on the switch. 4 (9.6) .378 M3 x 6 (0.8) Typ .031 (2.4) Dia Typ .094 (21.4) .843 (13.5) .531 (5.9) .232 (1.0) .039 (33.3) 1.311 (5.7) .224 (28.0) 1.102 (31.2) 1.228 (4.8) Typ .189 α° (3.5) Dia Typ .138 3 6 (27.0) 1.063 (38.0) 1.496 SW3006A Inductive AC 125V DPDT –– –– –– –– –– DPDT Throw & Schematic: Center Electrical Capacity 5 2 4 1 (18.5) .728 (45.0) 1.772 (38.0) 1.496 (14.5) .571 Maximum Effective Panel Thickness: .197” (5.0mm) for SW3006A & SW3008A models; .177” (4.5mm) for SW3007A models NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-07 High Capacity Rockers Series SW GENERAL SPECIFICATIONS FOR SW3800s Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Note: See Supplement section for details of design for inductive DC loads. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: Nominal Operating Force: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum 50,000 operations minimum 25,000 operations minimum Shown on following drawings 1,800 grams for SW3822 2,200 grams for SW3823 Off to On 800 grams for SW3823 On to Off Materials & Finishes Rocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contacts: Stationary Contacts: Terminals: Urea resin; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Melamine phenol Copper with silver plating Silver alloy plus copper with silver plating Brass (terminal screws of brass with nickel plating) Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Standards & Certifications UL Recognized: R R C-UL Recognized: CSA Certified: UL symbol shown on following pages indicates models recognized. UL File No. WOYR2.E44145; see Supplement section to find UL rating details. C-UL symbol shown on following pages indicates models recognized. C-UL File No. WOYR8.E44145; see Supplement section to find C-UL rating details. CSA symbol shown on following pages indicates models certified. CSA File No. 023535-0-000; see Supplement section to find CSA rating details. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-07 Series SW High Capacity Rockers DOUBLE POLE WITH SCREW LUG Rocker Position/Connected Terminals Down Model Approvals SW3821 R R SW3822 SW3823 SW3821D SW3822D SW3823D R R R R R R R R R R Center Electrical Capacity Resistive Up Pole Inductive AC 125V AC 250V DC 30V DC 125V AC 125V PF 0.6 AC 250V PF 0.6 DPST ON 2-3 5-6 NONE OFF — 30A 30A 30A 1A 30A 15A DPDT ON 2-3 5-6 NONE ON 2-1 5-4 30A 30A 30A 1A 30A 15A DPDT ON 2-3 5-6 OFF ON 2-1 5-4 30A 30A 30A 1A 30A 15A DPST ON 2-3 5-6 NONE OFF — — — 30A 15A — — DPDT ON 2-3 5-6 NONE ON 2-1 5-4 — — 30A 15A — — DPDT ON 2-3 5-6 OFF ON 2-1 5-4 — — 30A 15A — — Throw & Schematics: 2 DPST (COM) 3 5 2 DPDT 3 6 (13.2) .520 M3 x 6 5 (COM) 1 6 Note: Terminal numbers are actually on the switch. 4 (12.0) .472 (1.0) .039 M4.5x6 (46.0) 1.811 3 5 4 2 1 (42.0) 1.654 26° (12.0) Typ .472 (36.0) (31.0) 1.417 1.220 (22.0) .866 SW3822 6 (6.7) .264 (44.5) 1.752 (56.0) 2.205 (24.0) .945 Maximum Effective Panel Thickness .177” (4.5mm) Panel cutout shown below. SW3821 & SW3821D do not have terminals 1 & 4. THREE POLE WITH SCREW LUG Rocker Position/Connected Terminals Down Model Approvals SW3831 SW3832 SW3833 SW3831D SW3832D SW3833D R R R R R R R R R R R R Throw & Schematics: Center Electrical Capacity Resistive Up Pole Inductive AC 125V AC 250V DC 30V DC 125V AC 125V PF 0.6 AC 250V PF 0.6 3PST ON 2-3 5-6 8-9 NONE OFF 30A 30A 30A 1A 30A 15A 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 30A 30A 30A 1A 30A 15A 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 30A 30A 30A 1A 30A 15A 3PST ON 2-3 5-6 8-9 NONE OFF — — 30A 15A — — 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 — — 30A 15A — — 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 — 30A 15A — — 2 5 (COM) — — 8 3PST 2 5 — (COM) 8 Note: Terminal numbers are actually on the switch. 3PDT 3 9 6 (13.2) .520 M3 x 6 3 1 6 4 9 7 (14.5) Typ .571 (1.0) .039 (3.5) Dia Typ .138 M4.5 x 6 6 3 9 (46.0) 1.811 (37.0) 1.457 (42.0) 1.654 (46.0) 1.811 26° (12.0) Typ .472 (36.0) (31.0) 1.417 1.220 (22.0) .866 5 8 7 2 1 (56.0) 2.205 4 (6.7) .264 (44.5) 1.752 SW3831 & SW3831D do not have terminals 1, 4 & 7. (43.0) 1.693 (23.0) .906 Maximum Effective Panel Thickness .177” (4.5mm) NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 05-07